XTN - Magnetic Drive Solids Handling Pump
XTN - Magnetic Drive Solids Handling Pump
- Zero leakage due to magnetic drive execution.
- Reduced installation costs as there are no double mechanical seals or external flushing systems required.
- No process contamination from external flushing fluids in case of double mechanical seal failure.
- Complies with 2006/42/CE.
- Designed according to ISO 2858, ISO 15783, and ATEX 100 Directive 2014/34/EU.
- Flanged according to UNI 1092-2 (ISO 7005-2) PN16RF type B and slotted ANSI 150RF.
- Suitable for dirty liquids, fluids with organic solids, chemical precipitations, and suspensions.
- Internal circulation of liquid and particles ensures cooling and lubrication of bushes.
- Open impeller design minimizes axial thrust and is suitable for solid particles.
- Isolation shell made of PFA with carbon fiber reinforcement for mechanical strength.
- Bushes are diamond-coated SSIC for optimal circulation and protection during short dry runs.
- Rotating shaft integrated with the impeller, lined with PFA, ensuring no risks with incorrect rotation.
- Maximum flow rate: 70 m3/h at 2900 rpm.
- Maximum head: 60 mcl.
- Electric motor range: 0.75 kW to 18.5 kW.
- Temperature range: -50°C to +160°C.
- Allowable pressure range: up to 16 bar.
- Suction/Delivery options: DN50/DN32 and DN80/DN50.
- Flange connections: UNI 1092-2 / ISO 7005-2 PN 16, type B, slotted to ASME/ANSI class 150.
- Volute casing, impeller, and bushing support are PFA lined.
- Isolation shell cover is made of carbon fiber.
- Thrust bearing, bearing sleeve, and bearing bush are made of sintered SSIC.
- Inner and outer magnets are PFA lined and made of NdFeB.
For further details, visit the official website: www.cdrpompe.com
Catalog excerpts
Lined magnetic drive process centrifugal pump for suspended solids XTN-BL / XTN-L XTN-BL closed coupled Comply to : 2006/42/CE New mag-driven pump suitable for dirty liquids For fluids with organic solids, chemical precipitations and suspensions Flanged UNI 1092-2 (ISO 7005-2 ) PN16RF type B slotted ANSI 150RF XTN-L bare shaft PFA Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Centrifugal pumps MAIN ADVANTAGES: Zero leakage thanks to magnetic driven execution Reduced cost of installation: no double mechanical seals and external flushing system No process contamination with external flushing fluid, when double mechanical seals fail
Open the catalog to page 1
Internal circulation of liquid and particles: ' > • Fluid and particles are pressurized by impeller and circulate through the large paths inside the pump; • Fluid circulation assures cooling and lubrication of bushes; • Fluid and particles come back to suction through the central canal in pump shaft. Open impeller: Extremely low axial thrust, resulting in low mechanical solicitations of bushes. Suitable for solid particles. It centrifuges soft particles agglomerates. Rotating shaft: Integrated in one piece with the impeller, without joints, weldings or threaded connections. SS core lined in PFA....
Open the catalog to page 2
For further info, please visit: C.D.R. Pompe S.R.L. Via Raffaello Sanzio, 57 - 20021 Bollate (MI) - Italy Tel. +39029901941 www.cdrpompe.com Technical Characteristics The technical data and characteristics stated in this General Catalogue are not binding. CDR Pompe S.r.l. reserves the right to make modifications without notice. Therefore data, dimensions, performances and any other stated issues are indicative only and not binding. TB - XTN 2018
Open the catalog to page 4
