Lined Magnetic Drive Process Centrifugal Pumps UTN-L / UTN-BL I° frame Comply to : 2006/42/CE Design to : ISO 2858 / EN 22858 (ex DIN 24256) ISO 5199 - UNI 15783 ATEX 100 Directive2014/34/EC Flanged UNI 1092-2 (ISO 7005-2 ) PN16RF type B slotted ANSI 150RF UTN-BL PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps Lining: PP (Polypropylene), PVDF (Polyvinylidene fluoride), PFA (Perfluoroalkoxy) Close-coupled and Long-coupled executions

UTN SERIES Mag drive concept Suitable for handling corrosive, aggressive UTN-L Long Coupled pumps use the The synchronous drive configura- back pull-out principle and a tion is based on an outer magnet strong bearing housing with ring assembly built to magnetically flexible coupling. together by the flux of attracting magnet poles flowing through the containment isolation shell. Design Application Fields pecially developed to be suitable even under heavy duty service. sign with the UCL series (mechanical seal grease lubricated bearing bracket, es- UTN range share the same hydraulic de- where...

All PFA components are made through Transfer Moulding process. The Transfer Moulding process is also employed for PVDF \ PP lined casing. Sealless design Total containment, essential for hazardous, aggressive or valuable product. All wetted parts have a high chemical resistance employing a performing material as Virgin unfilled PFA, granting also a wall thickness of at least 4mm to 5mm Virgin PFA. Alternative available materials for the Wetted parts: PP and PVDF. Vacuum resistant housing lining. Moreover, all PFA components are made through transfer moulding process.

FEATURES CASING IMPELLER ASSEMBLY The ductile cast iron armour protects the fluoroplastic peripheral surfaces of the pump surrounded by a minimum 4mm of fluoroplastic material, The closed impeller design, made around a sturdy from pipe strain, vibration, external shocks and • Standard back vanes reduce axial thrust casing to be Vacuum resistant. and seal chamber pressure to guarantee and extraordinary bearing and seal life. Top centerline discharge for air handling, self- • The integral design of the impeller maximum efficiency and reliability. during the handling; moreover it allows the metallic...

ROTATING BUSHINGS AND AXIAL THRUST SUCTION COVER Large Silicon Carbide The suction cover is designed to guarantee a long life time even under stress, in fact it’s a lined Static Axial Thrust armoured piece made around design offers ruggedness even under heavy duty strong metal core on PFA PAINTING COATING QUALITY RUNSAFESIC MICROCRYSTALLINE DIAMOND COATING • Lowest coefficient of friction and heat generation, even when lubrication The metal surfaces are protected by a high performance three coating layers (240 micron): is insufficient or under dry running condition. • Universal chemical resistance....

Technical Specifications _L UTN-L Performances 2900 rpm

Not binding data refers to water at room temperature. For specific performance curve contact CDR Pompe S.R.L

UTN-BL CLOSE COUPLED EXECUTION 03 z □ S Pump Model Motor Size

Pump Model Pump Model

OVERALL DIMENSIONSUTN-L BASEPLATE INSTALLATION Baseplate Arrangement Motor Size

NEW UTN 125-80-160 - SEE SPECIFIC BROCHURE UTN 125-80-160 casing : new 125-80-160 casing is matching perfectly the impeller design , to achieve the best hydraulic efficiency. The benefits of the lined technology are : • stability to increased temperature under vacuum working capabilities constant coating layer thickness thanks to TM process high resistance to the permeation thanks to the TM process (for PFA and PVDF execution) New Impeller 125-80-160 assembly made in one piece granting the maximum reliability and stability during the pump operation. New Suction Cover : using a static shaft design,...

For further info, please visit www.cdrpompe.com [email protected] Technical Characteristics The technical data and characteristics stated in this General Catalogue are not binding. CDR Pompe S.r.l. reserves the right to make modifications without notice. Therefore data, dimensions, performances and any other stated issues are indicative only and not binding Anyway for any technical details you must require an up-to-date product technical card.