CCL / CCL-B CCL lined PP End Suction - Back pull-out design CSE single internal Mechanical Seals PP Lined Mechanical Seal Centrifugal Pumps Comply to : 2006/42/CE Design to : EN 22858 / ISO 2858 (ex DIN 24256) ISO 5199 Flanged UNI 1092-2 (ISO 7005-2 ) PN16 RF type B slotted ANSI 150 RF Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal R Lining: PP (Polypropylene) Long-coupled and Close-coupled executions

The shaft seal chamber with its Back pull--out design conical design can accommodate the Pumps use the back pullout following mechanical seal types : TSI Single internal mechanical bearing housing with flexible seal for clean fluids Long- coupled execution TSE Single external mechanical seal for corrosive fluids CSE Single internal mechanical seal for aggressive or dirty fluids Close coupled execution Pumps are equipped with dangerous fluids The CCL offers a wide range of shaft sealing and the pumps are also equipped with reliable bearing bracket, especially developed to be suitable even under...

Rigid shaft made of corrosion resistant stainless steel minimizes the shaft deflection < 0,05 mm: the design is in “dry shaft execution” where there is no contact between shaft and medium. • TSI Single internal mechanical seal • TSE Single external mechanical seal • CSE Single internal mechanical seal • Double tandem TSI / TSI mechancial seal PP lined casing and impeller are made through transfer moulding process. The bearing frame can be equipped with: • Standard oil seal • Labyrinth seal All the CCL pumps can be equipped with closed or open radial impeller, single stage execution. Oil sump...

LINED CASING The ductile cast iron armour protects the fluoroplastic peripheral surfaces of the pump from pipe strain, vibration, external shocks and during the handling; moreover it allows the casing to be Vacuum resistant. Top centerline discharge for air handling, self-venting. Draining casing (optional). LINED IMPELLER The combination of a solid metal core and a PP lining made by Transfer Moulding assures an excellent mechanical reliability and an optimal chemical resistance. The problem of reverse rotation during start-up has been eliminated thanks to the key driven system. Standard back...

MECHANICAL SEAL CSE-Q SINGLE INTERNAL MECHANICAL SEAL WITH QUENCH CSE SINGLE INTERNAL SEAL TAPERED SEAL CHAMBER Wide choice of sealing arrangements for maximum sealing flexibility. The CDR mechanical seals have been developed for difficult operating conditions, hazardous and corrosive medium. CSE Single mechanical seal TSI - SINGLE INTERNAL MECHANICAL SEAL Suitable to work with low/ moderate dirty corrosive liquids. due to air contact, CDR offers plan 62. Easy maintenance thanks to the semi-cartridge design. In case of liquid cristallization, Extremely abrasion−resistant SiSiC seats, no metal...

FEATURES BEARING BRACKET FOR LONG COUPLED EXECUTION Extra−Large Oil Sump design allows to get a large oil capacity. Breather ƒ filling plug on top . Oil sight glass grants a proper oil level. Large drain plug. The bearing frame can be equipped with 3 different type of protections : • Standard oil seal • Non contacting Labyrinth seal Constant level oiler (as an option). Conditions monitoring (as an option). BEARINGS Heavy duty ball bearings configuration to provide L10 bearing life in excess of 17,500 hours (up to 1.25 QBEP). Frontal (impeller side) : one row roller bearings type with high radial...

Technical Specifications CCL : LONG COUPLED EXECUTION Performances 2900 rpm

Closed impellers are indicated to be used with clean liquids. They have a good hydraulic efficiency and there’s no recirculation between the blade’s planes, granting same performances and reliability PERFORMANCE FIELDS Closed Impeller No binding data refers to water at room temperature. For specific performance curve contact CDR Pompe S.R.L

Open Radial Impeller Semi open (Radial) are indicated to be used with dirty liquids. They have a low hydraulic efficiency and there’s recirculation between the blade’s plane PERFORMANCE FIELDS No binding data refers to water at room temperature. For specific performance curve contact CDR Pompe S.R.L.

OVERALL DIMENSIONS Pump Model *y = DNm 80 equipped with 4 studs M16x60 for ANSI 150 Pump Model *M dimension is according to installed motor manufacturer

CCL : Baseplate installation Pump Model Motor size *L4 dimension is according to installed motor manufacturer *y = DNm 80 pump size 125-80-160/200 equipped with 4 studs M16x60 for ANSI 150

For further info, please visit: C.D.R. Pompe S.R.L. Via Raffaello Sanzio, 57 - 20021 Bollate (MI) - Italy Tel. +39029901941 www.cdrpompe.com Technical Characteristics The technical data and characteristics stated in this General Catalogue are not binding. CDR Pompe S.r.l. reserves the right to make modifications without notice. Therefore data, dimensions, performances and any other stated issues are indicative only and not binding. TB - CCL 2018.05_EN