N30P DIGITAL PANEL METER • Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos, tg, , frequency, active, reactive and apparent energy, 15 minutes’ active power, 10 minutes’ voltage, 10 seconds’ frequency. • Three-colour display (14 mm high), in three intervals of the measured value. • Meter programming from the keyboard or through the RS-485 interface by means of the free delivered LPConfig program. • Four alarm outputs with signalling by LED diodes, operating in 6 different modes. • Storage of minimal and maximal values for all measured quantities. • Conversion of any measured value into a 0/4...20 mA or 0...10 V analog signal. • Storage of minimal and maximal values for all measured quantities. • Firmware updating (option). FeATUReS: LPConfig Program Example of Application KD7 recorder INPUTS: N30P digital meter PC Computer/ configuration by LPConfig program Measurement and recording of energy consumption in 1-phase or three-phase symmetrically loaded network Inputs Input kind Voltage input Current input Measuring range Rated operating conditions Ratio values Measuring Ranges Input kind GAlVANIC ISolATIoN: Indication range Measuring range Basic error Current 1 A/5 A Voltage 100 V/400 V Frequency Active power Reactive power Apparent power Cos φ Tangens φ φ Active energy Reactive energy Current time Output kind Relay output Analog output Properties • 2 x relays, voltageless NO contacts, load-carrying capacity 250 V a.c./ 0.5 A a.c. • 2 x relays, voltageless change-over contacts, load-carrying capacity 250 V a.c./ 0.5 A a.c. • current programmable 0/4...20 mA, load resistance ≤ 500 Ω • voltage programmable 0...10 V, load resistance ≥ 500 Ω • resolution 0.01% of the range Energy pulse output • OC type output, passive of class A, acc. to EN 62053-31, supply voltage 18...27 V, current 10...27 mA. • Output pulse constant: 5000 imp./kWh, independently of Ku and Ki settings. Transmission protocol MODBUS RTU Digital Interfaces

N30P DIGITAL PANEL METER External Features 5 digit LED display indication range -19999..99999 digit height: 14 mm < 0.2 kg Readout field Weight Overall dimensions 96 ´ 48 ´ 93 mm from frontal side: IP65 three-colour display (colour changes depending on displayed value): red, green, orange Panel cut-out: 92+0,6 ´ 45+0,6 mm from rear side: IP 10 Rated Operating Conditions Supply voltage Temperature Relative humidity Operating position External magnetic field Short duration overload (5 s) Power consumption: - in supply circuit - in voltage/current circuit storage: -30...70°C condensation inadmissible...