BO05C156C0 Optical Transceiver SFP Duplex 1000Base-ZX 1.25G 120KM Datasheet - Rev. 1.1 SFP 1.25G 1550nm Single mode Optical Transceiver Description The BlueOptics© BO05C156C0 SFP transceiver is a high performance, cost effective module supporting a data rate up to 1.25Gbps with 120 Kilometer link length on single mode fiber. 1.25Gb/s serial optical interface compliant to 802.3z 1000BASE-ZX BlueOptics© transceivers are 100% compliant with SFP Multi-Source Agreement (MSA).  All BlueOptics© SFP transceivers can be equipped with digital diagnostic function compliant to MSA SFF8472. Hot-pluggable SFP footprint compliant to SFF-8074i Duplex LC/UPC interface Using digital diagnostic, BlueOptics© SFP transceivers provide the following real time information: Metal enclosure, for lower EMI RoHS compliant and lead-free Single +3.3V power supply Case operating temperature Supply voltage Laser bias current Laser average output power Laser received input power Temperature The transceiver consists of five sections: A DFB transmitter, a PIN photodiode, a trans-impedance preamplifier (TIA), the LD Driver and the digital diagnostic function. Ethernet / Fiber Channel Switch to Switch Interface Router/Server Interface Other optical links Specifications may change without notice. For further information visit www.cbo-it.de

BO05C156C0 Optical Transceiver SFP Duplex 1000Base-ZX 1.25G 120KM Datasheet - Rev. 1.1 Order Information Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Laser Safety: Even small radiation emitted by laser devices can be dangerous to human eyes and lead to permanent eye injuries. Be sure to avoid eye contact with direct or indirect radiation. Regulatory Compliance Warranty Every BlueOptics© transceiver comes with a 5 year replacement warranty and lifetime support. For a warranty inquiry, please...

BO05C156C0 Optical Transceiver SFP Duplex 1000Base-ZX 1.25G 120KM Datasheet - Rev. 1.1 1. Absolute Maximum Ratings Parameter Storage Temperature Storage Ambient Humidity 2. Recommended Operating Conditions Parameter Ambient Humidity Data Rate Transmission Distance Coupled Fiber Single mode fiber 3. Electrical Interface Characteristics Parameter Transmitter Total Supply Current Transmitter Disable Input-High Transmitter Disable Input-Low Transmitter Fault Input-High Transmitter Fault Input-Low Receiver Total Supply Current LOSS Output Voltage-High LOSS Output Voltage-Low ICC VDISH VDISL VTxFH...

BO05C156C0 Optical Transceiver SFP Duplex 1000Base-ZX 1.25G 120KM Datasheet - Rev. 1.1 5. Receiver Specifications - Optical Parameter Input Optical Wavelength Receiver Sensitivity Input Saturation Power (Overload) LOS Assert LOS De-assert LOS Hysteresis Notes: Measured with Light source 1550nm, ER=9dB; BER =<10-12 @PRBS=27 -1 non-return-to-zero. Symbol VEET TFAULT TDIS MOD_DEF(2) MOD_DEF(1) MOD_DEF(0) RS0 LOS VEER VEER VEER RDRD+ VEER VCCR VCCT VEET TD+ TDVEET Name / Description Transmitter Ground (Common with Receiver Ground) Transmitter Fault indication Transmitter Disable Module Definition...

BO05C156C0 Optical Transceiver SFP Duplex 1000Base-ZX 1.25G 120KM Datasheet - Rev. 1.1 Pinout of Connector Block on Host Board 7. EEPROM Information The SFP MSA defines a 256-byte memory map in EEPROM describing the transceivers capabilities, standard interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit address 1010000X (A0h). Data Address 0 1 2 3-10 11 12 13 14 15 16 17 18 29 Identifier Ext. Identifier Connector Transceiver Encoding BR, Nominal Reserved Length (9μm) km Length (9μm) 100m Length (50μm) 10m Length(62.5μm)10m Length (Copper)...

Diagnostics Diagnostics Checksum of bytes 6494 Vendor Specific 8. Digital Diagnostics / Digital Optical Monitoring The transceiver provides serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA). The diagnostic information with internal calibration or external calibration are all implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring. 9. Recommended Interface Circuit Specifications may change without notice. For further...

BO05C156C0 Optical Transceiver SFP Duplex 1000Base-ZX 1.25G 120KM Datasheet - Rev. 1.1 10. Mechanical Specifications (Unit: mm) Specifications may change without notice. For further information visit www.cbo-it.de