Carbon Basalt Glas TDS 4410 UFIW Y8EA-S0H7-400K-A7R4 fako® Sealing putty 3765 has been developed as a supplement to the fako® Sealing strip 3714, for most sealing purposes where absolute resistance to ageing is required and for which an intermediate layer of 0.8 mm to 1 mm has to be used. In combination with the fako® Sealing strip 3714 most desired thickness's can be obtained for seals. The putty does not become hard but remains plastic and elastic. ✓ We cannot guarantee the quality and suitability of the end products manufactured with our materials, as we have no influence on compliance with the processing instructions ✓ For special applications we recommend in any case own production tests to be carried out. ✓ CBG Composites will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contact, negligence or strict liability. Processing ✓ Do not eat or drink while processing CBG Composites GmbH Egerpohl 2 D-51688 Wipperfurth / Germany www.fako.de,www.cbg-composites.de The technical specifications of our products reflect the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge is constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not liable. Our general terms and conditions apply, the latest version of which can be downloaded on www.fako.de