SRS-2 Solvent Removal System

Product catalog summary

Overview
The CannaTrue™ SRS-2 Solvent Removal System is designed for the efficient removal and recycling of solvents used in cannabis and hemp oil processing, achieving a recovery rate of 90-97%. It utilizes ethanol for safer distillation processes.

Features

Automation: The system is automated for single-operator batch processing, featuring standard PLC controls and on-screen cycle progress monitoring.
Safety: Equipped with UL certified electronics, stainless steel boiling tank, multiple emergency shutdowns, and no glass components.
Ergonomics: Easy material loading/unloading, operates within a controlled environment, and requires minimal labor.
Performance: Operates at lower temperatures, supports bulk production, and ensures consistent product quality with cycle times of 3-6+ gallons per hour.

Technical Specifications

Capacity: Available in 8, 15, and 30-gallon models.
Dimensions: 92” L x 30” W x 74” H.
Electrical Configuration: Varies by model, with specific voltage and phase requirements.
Recommended Ambient Temperature: 20°C-35°C (68°F-95°F).
Additional Features: Includes chiller, vent requirements, and vacuum assist options.

Cost-Saving Benefits
The system helps reduce solvent costs, waste, and disposal expenses while adhering to industry regulations and improving environmental impact.

Contact Information
CBG Biotech, 30175 Solon Industrial Pkwy, Solon, OH 44139. Website: cbgbiotech.com, Phone: (800) 941-9484, Email: [email protected]. Made in the USA.

Catalog excerpts

SRS-2 Solvent Removal System For Solvent Removal and Recycling of Cannabis and Hemp Oil Remove and Recycle Cannabis and Hemp Solvents with 90-97% Recovery Achieve strong recovery while using safer ethanol during the distillation processes. Features Automation - Designed for single operator batch processing - Uses SRS Series logarithmic programming - Standard PLC controls - On-screen cycle progress and diagnostic monitoring - UL certified electronics (UL2208 and UL61010) - Boiling tank 304 stainless steel - Multiple emergency shutdowns with pressure-relief valve - Multiple monitoring probes that accurately control operating temperatures - No glass components - Convenient material loading/unloading - Operates in a controlled and enclosed environment within the unit’s footprint - Collection bags/drain designed to provide easy removal of final concentrate from the boiling tank - Minimal labor required - Lower temperature operation - Designed to enable bulk production and recovery in any volume - Consistent solvent removal processing for consistent product quality batch to batch - 3-6+ gallons per hour cycle times* The CannaTrue™ SRS-2 Solvent Removal System is an automated batch system for solvent removal during the cannabis and hemp oil concentrate recovery proce

Open the catalog to page 1

SRS-2 Solvent Removal System Technical Specifications Capacity 8 gallon (30 liter) 15 gallon (57 liter) 30 gallon (114 liter) Dimensions Electrical Configuration 92” L x 30” W x 74” H (122 cm L x 76 cm W x 188 cm H) 8- and 15- gallon models 220/240V/1PH/60Hz, 27 Full Load Amps, 208V/1PH/60Hz** 30 gallon model 220/240V/3PH, two 30A power feeds (for recycler and chiller) 8- and 15- gallon models 1200 lbs. 30 gallon model 1400 lbs. Recommended Ambient Temperature Chiller Vacuum Assist Vent Requirements Mounting 20°C-35°C (68°F-95°F) Yes Yes - Air and electric options, 90PSI and 8CFM Vent to outside...

Open the catalog to page 2

SRS-2 Solvent Removal System

SRS-2 Solvent Removal System

Catalog excerpts

All CBG Biotech catalogs and technical brochures