SRS-1 Solvent Removal System

Product catalog summary

Overview
The SRS-1 Solvent Removal System is designed for the removal and recycling of solvents used in cannabis and hemp oil processing, achieving a recovery rate of 90-97%. It utilizes ethanol for safer distillation processes.

Features

CannaTrue™ Technology: Automated batch system for efficient solvent removal.
Automation: Single operator batch processing with standard PLC controls and on-screen monitoring.
Safety: UL certified electronics, stainless steel construction, no glass components, multiple emergency shutdowns, and precise temperature control.
Ergonomics: Operates within a controlled environment, easy material handling, and minimal labor required.
Performance: Supports bulk production with consistent quality, processing 3-6+ gallons per hour.

Technical Specifications

Capacity: Available in 8, 15, and 30-gallon models.
Dimensions: 48” L x 30” W x 74” H.
Electrical Configuration: Varies by model, with specific voltage and phase requirements.
Recommended Ambient Temperature: 20°C-35°C (68°F-95°F).
Vent Requirements: Vent to outside atmosphere or ventilation system.
Weight: 760 lbs for 8- and 15-gallon models, 860 lbs for 30-gallon model.

Cost-Saving Benefits
The system helps reduce solvent costs, waste, and disposal expenses, while adhering to industry regulations and promoting sustainability.

Contact Information
CBG Biotech, 30175 Solon Industrial Pkwy, Solon, OH 44139. Phone: (800) 941-9484. Email: [email protected]

Catalog excerpts

SRS-1 Solvent Removal System For Solvent Removal and Recycling of Cannabis and Hemp Oil Remove and Recycle Cannabis and Hemp Solvents with 90-97% Recovery Achieve stronger recovery while using safer ethanol during the distillation processes. Features Automation - Designed for single operator batch processing - Uses SRS Series logarithmic programming - Standard PLC controls - On-screen cycle progress and diagnostic monitoring - UL certified electronics (UL2208 and UL61010 certified) - Boiling tank 304 stainless steel construction - No glass components - Multiple emergency shutdowns with pressure-relief valve - Multiple monitoring probes that accurately control operating temperatures - Operates in a controlled and enclosed environment within the unit’s footprint - Collection bags designed to provide easy removal of final concentrate from the boiling tank - Convenient material loading/unloading - Minimal labor required - Designed to enable bulk production and recovery in any volume - Consistent solvent removal processing for consistent product quality batch to batch - 3-6+ gallons per hour cycle times* The CannaTrue™ SRS-1 Solvent Removal System is an automated batch system for solvent removal during the cannabis and hemp oil concentrate recovery proce

Open the catalog to page 1

SRS-1 Solvent Removal System Technical Specifications Capacity 8 gallon (30 liter) 15 gallon (57 liter) 30 gallon (114 liter) Dimensions Electrical Configuration 48” L x 30” W x 74” H (234 cm L x 76 cm W x 188 cm H) 8- and 15- gallon models 220/240V/1PH/60Hz, 30 Full Load Amps, 208V/1PH/60Hz** 30 gallon model 220/240V/3PH, one 30A power feed 8- and 15- gallon models 760 lbs. 30 gallon model 860 lbs. Recommended Ambient Temperature Vacuum Assist Vent Requirements Mounting Vent to outside atmosphere or ventilation system 15” legs - Standard *run and recovery times/rates may vary with solvent mixture...

Open the catalog to page 2

SRS-1 Solvent Removal System

SRS-1 Solvent Removal System

Catalog excerpts

All CBG Biotech catalogs and technical brochures