1. Catalogs
  2. CATU
  3. CATU LOCK OUT EARTHING CLAMP

CATU LOCK OUT EARTHING CLAMP

CATU LOCK OUT EARTHING CLAMP

CATU LOCK OUT EARTHING CLAMP

Product catalog summary
Introduction
The MT-870 innovation by SICAME GROUP is designed to enhance safety by ensuring that earthing equipment is not forgotten on electrical installations. This solution includes an earthing clamp paired with a lock-out padlock, both using the same retaining key, to enforce a specific sequence for installation and disassembly during lock-out procedures.

Specifications
The MT-870 system prevents the reactivation of electrical systems while the clamp is in place, addressing the risk of accidental system reactivation in complex or remote setups. The system requires the use of a personal lock-out padlock by authorized personnel.

Product Options
  • MT-870: Paired clamp/padlock for earthing equipment.
  • MT-5805/870: Three-phase earthing equipment with high capacity clamps and MT-870 paired clamp/padlock. Short-circuit rating: 20 kA/1s.
  • MT-1910/870: Three-phase earthing equipment with fixed-point clamps and MT-870 paired clamp/padlock. Short-circuit rating: 20 kA/1s.
  • Customized earthing equipment with MT-870 paired clamp/padlock available on request.

Technical Details
The MT-5805/870 is suitable for both low and high voltage installations, supporting cable connections with a maximum cross-section of 70 mm². It has a clamping capacity of Ø 6-26 mm and flat 0-30 mm.

Contact Information
SICAME GROUP
10/20 Avenue JEAN-JAURÈS, B.P.2, 92222 BAGNEUX CEDEX, FRANCE
Phone: (33) 01 42 31 46 46
Fax: (33) 01 42 31 46 32
Website: www.catuelec.com
See more

Catalog excerpts

CATU LOCK OUT EARTHING CLAMP-1

THE SPECIALIST IN ELECTRICAL RISK PREVENTION www.catuelec.com S/CAME GROUP

 Open the catalog to page 1
CATU LOCK OUT EARTHING CLAMP-2

Our new solution consists of an earthing clamp paired with a lock-out padlock, both using the same retaining key. This solution imposes a sequence for the installation of the equipment during lock-out as well as a disassembly sequence during the unlocking process. It prevents switching back on the system as long as the clamp is still in place as this dangerous event may occur with multiple and remote systems. The padlock paired with the clamp needs to be complemented by the personal lock-out padlock belonging to authorised employee who locks equipement. Short-circuit rating: 20 kA/1s. Suitable...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.