Cat® 7182 Electric Rope Shovel Specifications Dimensions Dipper payload Dipper capacity Length of boom Effective length of dipper handle Overall length of dipper handle Weights Working weight, with dipper and standard links Net weight, domestic, without ballast or dipper General-purpose dipper 10 m3 (13yd3) Ballast (furnished by customer) 18 tonnes (20 tons) 6.9-17.6 m3 (9-23 yd3) 12.24 m (40 ft 2 in) 5.03 m (16 ft 6 in) 8.23 m (27 ft) Planetary Propel Dual-motor independent drive Revolving Frame (Center Section) Impact-resistant steel Length: 7.56 m (24 ft 9.5 in) Width: 3.54 m (11 ft 7.5 in) 345 637 kg (762,000 lbs) Turntable Swing rack pitch diameter Teeth external cut Steel roller rails diameter Number of tapered rollers Tapered steel roller diameter 293 111 kg (646,200 lbs) Swing 16 239 kg (35,800 lbs) 36 287 kg (80,000 lbs) Hoist 3.94 m (12 ft 11 in) external spur gear 3.54 m (11 ft 4 in) 42 23.6 cm (9.3 in) Dual swing units with double-reduction, conventional gearcase driven by a variable speed AC motor • These weights will vary slightly depending upon dipper and optional equipment selection Double-reduction, conventional gearcase driven by a variable-speed AC motor Main Structures Lube System Crawler Mounting Overall width 99cm (39 in) treads, standard Overall length of mounting Total effective bearing area (99 cm treads) Number and diameter of rollers Take-up tumbler diameter Number and pitch of treads • PLC-controlled, air-operated, three 208 liter (55 gallon) drum reserves • Divided into three systems: open gear lube, upper works grease, and lower works grease • Faults protection: low pressure and vent release 6.85 m (22 ft 6 in) 9.07 m (29 ft 9 in) 12.9 m² (139 ft²) 251.2 kpa (36.4 psi) Lower: 9, 58 cm (22.8 in) 137 cm (54 in) 51, 38 cm (15 in)

Optimal Working Ranges A Dumping height (maximum) 8.1 m (26 ft 6 in) Aj Dumping height at maximum electric crowd limit 5.1 m (16 ft 7 in) B Dumping radius (maximum) 14.9 m (48 ft 10 in) C Cutting height (maximum) 13 m (42 ft 9 in) D Cutting radius (maximum) 17.3 m (56 ft 9 in) E Radius of level floor 11.1 m (36 ft 5 in) (boom point sheaves) 12.5 m (41 ft 1 in) (boom point sheaves) 11.9 m (39 ft 2 in) I Clearance radius (revolving frame) 7.5 m (24 ft 6 in) J Clearance under frame (to ground) 2.1 m (6 ft 9 in) M Clearance under lowest point in truck frame/propel gearcase 0.5 m (1 ft 7 in) AC IGBTAcutrol...

Electric Rope Shovel—7182 Front End Boom Boom Boom point sheaves Boom point sheave diameters Handle diameter – twin stick Wall thickness (nominal) impact-resistant steel single-grooved cast steel 1.52 m (5 ft) ea. .24 m x .53 m (9.5 in x 20.75 in) Top/bottom 2.54 cm (1 in) Side wall 3.16 cm (1.25 in) Rope Data No. Diameter Hoist 1 Boom susp. 4 Dipper trip 1 51 mm (2 in) 51 mm (2 in) 13 mm (0.5 in) Type Construction wire rope 6x41 wire rope wire rope 6x37 Crowd Boom-mounted, twin-stick rack and pinion crowd is used to move dipper handle fore and aft For more complete information on Cat products,...