• Base: The dragline has an outside diameter of 19.51 m (64 ft) and a bearing area of 298.9 m² (3,217 ft²) with a bearing pressure of 128.3 kPa (18.61 psi). The circle rail diameter is 15.24 m (50 ft), and the average roller diameter is 30.5 cm (12 in). The swing gear pitch diameter is 13.03 m (42 ft 9 in).
• Weights: The net weight is approximately 3,447,302 kg (7,600,000 lbs) with the bucket, and the working weight is approximately 3,619,000 kg (8,619,000 lbs). The ballast weight, provided by the customer, is 462,211 kg (1,019,000 lbs). Shipping weight may vary by ±5%.
• Electrical: The drive system includes two water-cooled IGBT-AFE inverter cabinets. The main electrical systems consist of three hoist motors, three drag motors, three swing motors, and two walking motors, each with specified power ratings.

• Boom: The boom length is 100 m (328 ft) with a boom angle of 32º. The rated suspension load is 136,078 kg (300,000 lbs).
• Clearance and Operating Radii: The clearance radius is 21.6 m (71 ft), and the operating radius is 89.6 m (294 ft). The boom foot radius is 6.6 m (21 ft 6 in), and the clearance height is 2.2 m (7 ft 3 in).
• Heights: The boom foot height is 4.7 m (15 ft 6 in), the boom point height is 58.7 m (192 ft 8 in), the dumping height is 38.1 m (125 ft), and the maximum digging depth is 49.7 m (163 ft).

• Shoe Dimensions: The shoe width and length are 4.0 m x 19.8 m (13 ft x 65 ft), with a combined bearing area of 157.0 m² (1,690 ft²) and a bearing pressure of 195.3 kPa (28.33 psi) at 80% of working weight.
• Overall Dimensions: The overall width over shoes is 29.3 m (96 ft), and the length of step is approximately 2.3 m (7 ft 5 in).

• Drum and Rope: Both the drag and hoist systems have a drum diameter of 254.0 cm (100 in) and rope diameters of 8.26 cm (3.25 in).

For more information on Cat products, dealer services, and industry solutions, visit mining.cat.com and www.cat.com.

© 2011 Caterpillar Inc. All rights reserved. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.