• Base: The dragline has an outside diameter of 19.51 m (64 ft) and a bearing area of 298.9 m² (3,217 ft²) with a bearing pressure of 127.1 kPa (18.44 psi). The circle rail diameter is 15.24 m (50 ft), and the swing gear pitch diameter is 13.03 m (42 ft 9 in).
• Weights: The net weight is approximately 3,447,302 kg (7,600,000 lbs) with a working weight of 3,875,040 kg (8,543,000 lbs). The ballast weight, provided by the customer, is 427,738 kg (943,000 lbs).
• Electrical: The dragline is equipped with IGBT-AFE inverter cabinets that are water-cooled. It includes three hoist motors, three drag motors, three swing motors, and two walking motors, each with specific power ratings.

• Boom: The boom length is 100 m (328 ft) with a boom angle of 35º. The rated suspension load is 136,078 kg (300,000 lbs).
• Clearance and Operating Radius: The clearance radius is 21.6 m (71 ft), and the operating radius is 90 m (295.2 ft).
• Heights: The boom point height is 62 m (203 ft 5 in), the dumping height is 41.7 m (137 ft), and the maximum digging depth is 46.3 m (152 ft).

• The shoe width and length are 4.0 m x 19.8 m (13 ft x 65 ft) with a combined bearing area of 157.0 m² (1,690 ft²) and a bearing pressure of 193.6 kPa (28.08 psi) at 80% of working weight.

• Both the drag and hoist have a drum diameter of 254.0 cm (100 in) and rope diameters of 8.26 cm (3.25 in).

For more information on Cat products, dealer services, and industry solutions, visit mining.cat.com and www.cat.com.

© 2011 Caterpillar Inc. All rights reserved. CAT, CATERPILLAR, and related trademarks are the property of Caterpillar and may not be used without permission.