*mydirectindustry

Tomahawk

Product catalog summary

Overview: This document provides technical specifications, operation, and maintenance instructions for Tomahawk spray guns, focusing on conventional air cap and fluid nozzle configurations.

Specifications:

The chart lists various models of air caps and fluid nozzles, detailing their pressure/siphon capabilities, fan control, SCFM air cap ring, and available fluid nozzles with corresponding needle markings.
Models include 21-2166, 21-2266, 21-2366, among others, with fluid tip ranges from 0.6mm to 1.8mm.

Operation Instructions:

Connect the air supply hose to the gun handle and a pressurized fluid supply to the gun fluid inlet.
Fluid flow is controlled via the fluid control knob, with adjustments made by selecting the appropriate fluid orifice size.
Fan width is adjustable using the fan control knob.

Maintenance Instructions:

Routine cleaning and maintenance are crucial for proper operation. Some states require the use of covered gun cleaners to prevent solvent spraying into the atmosphere.
If a gun cleaner is unavailable, remove the air cap and clean separately with solvent. For pressure setups, use a pressurized solvent supply to clean the gun.
Disassembly and reassembly instructions are provided, including the removal and installation of various components such as the trigger, fluid control knob, needle, and air valve assembly.

Parts List:

A detailed list of parts is provided, including air caps, fluid nozzles, needle return springs, air inlet fittings, and more, with part numbers for reference.

Fluid Nozzle/Air Cap Selection:

Charts are provided for selecting the appropriate fluid nozzle and air cap combinations based on material type and viscosity, ranging from very thin to heavy materials.
Recommendations are given for different material types, such as inks, dyes, lacquers, enamels, primers, and adhesives, with corresponding fluid orifice sizes and air cap models.

Catalog excerpts

Tomahawk. PRESSURE/SIPHON FEED SPRAY GUN PRODUCT INFORMATION CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART MODEL NO. PRESS / SIPHON AVAILABLE FLUID NOZZLES NEEDLES/ marking on needle Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Gun inlet pressures may vary as required by application Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708 _www.spraycat.com_

Open the catalog to page 1

Operation and Maintenance Instructions for Tomahawk Spray Guns omahawk Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply to the gun fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to “fine tune flow rate”. 4. Fan width can be adjusted using the fan control knob. Turning the knob clockwise narrows the fan. Maintenance IMPORTANT! Routine cleaning and maintenance is essential...

Open the catalog to page 2

Head Insert Side Port Control Fluid Control Knob *See air cap selection chart on page 1 Indicates part included in repair kit # 10-140

Open the catalog to page 3

All C.A.Technologies catalogs and technical brochures

Archived catalogs

Catalog 2007
35 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list