MULTICOLOR SPRAY GUN WITH PRESSURE CUP PRODUCT INFORMATION CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART MODEL NO. L100CM Press / Siphon *SUGGESTED GUN INLET PRESS. 21-223 60-122 21-224 Pressure 50 (Plug) 21-228 *Gun inlet pressures may vary as required by application **All air caps require P/N 21-1583 base & air cap ring AVAILABLE FLUID NOZZLES NEEDLES / marking on needle Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708 www.spraycat.com

Operation and Maintenance Instructions for Spray Guns General The L100CM is a “bleeder type”(atomizing air flows continuously) spray gun with pressurized material supply cup and an internal mix style spray nozzle. It has been optimized for the application of multi-color coatings but also is excellent for single color latex or oil based interior paints. Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply or paint siphon cup to the gun fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel....

PART NO. See Air Cap Chart See Air Cap Chart 98-8014 21-1583 See Air Cap Chart 31-2201 61-1005 60-L11C 60-12C 60-131 60-1124 61-1033 98-0109 60-122 60-119 60-201 See Air Cap Chart DESCRIPTION Air Cap Retaining Ring Air Cap O-Ring Base Assembly Fluid Nozzle Fluid Nozzle Body Seal Ring* Nozzle Body Carrier Air Cap Adapter O-Ring* Lynx Gun Body Conventional Trigger Pivot Set Allen Plug Plug Seal Ring* Rear Bushing Fluid Needle Indicates part included in repair kit # 10-106