CAT-X - 4 Pages

Add to MyDirectIndustry favorites
CAT-X

Catalog excerpts

CAT-X GRAVITY FEED SPRAY GUN PRODUCT INFORMATION The CAT-X spray gun offers both a pressure reduced air cap 24-1352 and a HVLP air cap 24-1411 for areas requiring HVLP compliance. 24-1352 - consumes 11 cfm at 35 psi gun inlet. 24-1411 - consumes 13.5 cfm at 29 psi gun inlet - for areas requiring HVLP compliance. 24-1352 pressure reduced air caps can be used with the 1.0 mm - 1.7 mm fluid orifices listed below. 24-1411 HVLP air caps can be used with the full range of fluid orifices listed below. HVLP/PRESSURE REDUCED AIR CAP AND FLUID NOZZLE CHART MODEL NO. AVAILABLE FLUID NOZZLE TIPS 33-0208 0.8mm (.022") 33-0210 1.0mm (.040") 35* 11 33-0212 1.2mm (.046") 33-0213 1.3mm (.052") 0.8 - 1.7 60-1385 33-0214 1.4mm (.055") 33-0215 1.5mm (.059") 24-1411 29* 13.5 33-0217 1.7mm (.070") (HVLP) 33-0219 1.9mm (.075")** 33-0222 2.2mm (.086")** Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Note: Air cap test gages are available to confirm HVLP compliance. *Gun inlet pressures may vary as required by application **Needles and nozzles available for use with 24-1411 HVLP air cap only 24-1352 (Pressure Reduced) *MAX GUN FLUID TIP INLET PRESS. RANGE FOR HVLP Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708 www.spraycat.com

 Open the catalog to page 1

Operation and Maintenance Instructions for Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Screw the paint cup into the gun’s fluid inlet port. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to fine tune flow rate. 4. Fan width can be adjusted using the fan control knob. Turning the knob clockwise narrows the fan. Maintenance IMPORTANT! Routine cleaning and maintenance is essential to insure proper gun...

 Open the catalog to page 2

HVLP AIR CAP TEST GAGES **See air cap selection chart on page 1 ‘Indicates part included in repair kit # 10-161

 Open the catalog to page 3

CAT-X Includes: 51-404    700 mL Aluminum Gravity Cup (Male Thread) Air Caps and Needles Shown on Page 1 CAT-X-PPS Includes: 91-465    650 mL PPS™ Cup and Collar 91-466    Lids and Liners (Available in 50 Pack) Air Caps and Needles Shown on Page 1 EP-CAT-X Includes: 51-404    700 mL Aluminum Gravity Cup (Male Thread) Air Caps and Needles Shown on Page 1 EP-CAT-X-PPS Includes: 91-465    650 mL PPS™ Cup and Collar 91-466    Lids and Liners (Available in 50 Pack) Air Caps and Needles Shown on Page 1

 Open the catalog to page 4

All C.A.Technologies catalogs and technical brochures

  1. H2O-CPR-G

    4 Pages

  2. H2O-CPR

    4 Pages

  3. Lynx 100CVT

    4 Pages

  4. AutoCAT 100CVT

    4 Pages

  5. Tomahawk

    4 Pages

  6. Tomcat 100C

    4 Pages

  7. Jaguar 100C

    4 Pages

  8. Panther 100G

    4 Pages

  9. C14 AAA

    8 Pages

  10. 14:1 AAA PC

    2 Pages

  11. AutoCAT 100C

    4 Pages

  12. AutoCAT 300H

    4 Pages

  13. AutoCAT 100H

    4 Pages

  14. AM CPR

    4 Pages

  15. CATALYZER

    12 Pages

  16. AAA Line

    2 Pages

  17. CAT-X

    2 Pages

  18. CPR-G

    4 Pages

  19. 51-130 & 51-132

    2 Pages

  20. 51-303

    2 Pages

  21. GO System

    2 Pages

  22. 2013 Catalog

    47 Pages

Archived catalogs

  1. Catalog 2007

    35 Pages