AutoCAT 300H - 4 Pages

Add to MyDirectIndustry favorites
AutoCAT 300H

Catalog excerpts

AUTOMATIC SPRAY GUN PRODUCT INFORMATION HVLP AIR CAP AND FLUID NOZZLE CHART MODEL NO. *MAX GUN FAN SCFM @ AIR CAP AVAILABLE FLUID INLET PRESS. CONTROL MAX GUN RING NOZZLES TIPS FOR HVLP ORIFICE INLET 23-1008 pressure 40** 13.5 33-0208 0.8mm (.022") 23-1010 pressure 40** 13.5 33-0210 1.0mm (.040") 23-1012 pressure 40** 13.5 33-0212 1.2mm (.046") 23-1013 pressure 40** 13.5 33-0213 1.3mm (.052") 60-617 Included 23-1014 pressure 40** 13.5 33-0214 1.4mm (.055") 23-1015 pressure 40** 13.5 33-0215 1.5mm (.059") 23-1017 pressure 40** 13.5 33-0217 1.7mm (.070") 23-1019 pressure 40** 13.5 33-0219 1.9mm (.075") 23-1022 pressure 40** 13.5 33-0222 2.2mm (.086") Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Note: Air cap test gages are available to confirm HVLP compliance. *Gun inlet pressures may vary as required by application **When using optional gun regulator, inlet pressure changes to 45psi AIR CAPS Press / Siphon Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708 www.spraycat.com

 Open the catalog to page 1

Operation and Maintenance Instructions for Spray Guns Gun Mounting A 1/2” dia. x 5” lg. rod is provided for mounting. The gun can be mounted from the left or right side or from the bottom. Thread the mounting rod (9) into one of the three holes that best suit the mounting location for the application. Tighten the locknut (10) to secure the gun in the position desired. Do not plug the remaining holes as they are used as drain holes in the event of a needle seal leak. Operation: Connections and Adjustments The automatic gun requires two separate regulated air supply lines. 1. Connect one air...

 Open the catalog to page 2

Items for Recirculating Systems See Air Cap Chart Fluid Nozzle Body O-Ring (Teflon)* O-Ring (Teflon)* AutoCAT Gun Body HVLP O-Ring (Teflon)* Needle Seal Assembly* Nozzle Body Carrier (Standard) Nozzle Body Carrier (Recirculating) indicates part included in repair kit # 10-107 **See air cap selection chart on page 1 ***Air inlet fittings are available in 90 degree elbow . 90 degree elbow tubing "push on" style fittings P/N 53-520 1/8 NFT x 1/4" OD Tube P/N 53-521 1/4 NFT x 3/8" OD Tube Recirculating setups require: Item 6 (recirculating) & items 25, 26, 27 in place of item 12

 Open the catalog to page 3

All C.A.Technologies catalogs and technical brochures

  1. H2O-CPR-G

    4 Pages

  2. H2O-CPR

    4 Pages

  3. Lynx 100CVT

    4 Pages

  4. AutoCAT 100CVT

    4 Pages

  5. Tomahawk

    4 Pages

  6. Tomcat 100C

    4 Pages

  7. Jaguar 100C

    4 Pages

  8. Panther 100G

    4 Pages

  9. C14 AAA

    8 Pages

  10. 14:1 AAA PC

    2 Pages

  11. AutoCAT 100C

    4 Pages

  12. AutoCAT 100H

    4 Pages

  13. AM CPR

    4 Pages

  14. CATALYZER

    12 Pages

  15. AAA Line

    2 Pages

  16. CAT-X

    2 Pages

  17. CPR-G

    4 Pages

  18. CAT-X

    4 Pages

  19. 51-130 & 51-132

    2 Pages

  20. 51-303

    2 Pages

  21. GO System

    2 Pages

  22. 2013 Catalog

    47 Pages

Archived catalogs

  1. Catalog 2007

    35 Pages