*mydirectindustry

2013 Catalog

Product catalog summary

Document Overview

The document is a technical catalog and specification manual primarily focused on spray gun equipment, fluid and air hose assemblies, filtration media, and related accessories used in industrial, automotive, and wood finishing applications. Despite significant text corruption, key product configurations, specifications, and maintenance guidelines are identifiable.

1. Spray Gun Systems and Accessories

Product Listings and Configurations

Multiple CPR spray gun models are detailed, featuring 3 to 4 needle/nozzle setups, paired air caps, and various cup types including aluminum and PPS (polyphenylene sulfide) cups with integrated regulators.
Models include CPR, CPR-FE, CPR-G, CSLP, FEFF, FELCFM, L300C, and others, each with specific accessory kits comprising lids, liners, tools, and carrying cases.

Technical Specifications

Needle/nozzle orifice sizes range from 0.007" to 0.021", with spray angles between 20° and 80°, producing pattern widths from 4" to 16".
Air caps are provided in pairs to accommodate different spray patterns or materials.
Fluid cups vary in material and size, with regulators ensuring consistent pressure control.

Recommendations and Best Practices

Select needle/nozzle and air cap combinations based on application requirements to optimize spray quality.
Use appropriate cup types and regulators to maintain fluid consistency and prevent contamination.
Complete kits include necessary tools and cases to facilitate maintenance and portability.

2. Tanks and Fluid Handling Equipment

Tank Specifications and Configurations

Stainless steel tanks (2.5, 5, and 12.5 gallons) are fully constructed of stainless steel for durability and corrosion resistance, suitable for sanitary environments.
Standard steel tanks of similar capacities are available, constructed from heavy gauge steel for general industrial use.
Tanks come with options for wheels (mobility) or stationary feet.
Regulator configurations vary from zero to two per tank, with agitator options including none, hand-operated, or air-operated pneumatic agitators.

Recommendations

Choose tank material and agitator type based on application needs, such as sanitary requirements and mixing efficiency.
Air agitators provide efficient pneumatic mixing, while hand agitators are suitable for manual mixing tasks.

3. Hose and Assembly Specifications

Product Specifications

Air hoses available in sizes 1/4", 5/16", and 3/8"; fluid hoses in 1/4", 3/8", and 1/2"; nylon tubing at 1/8".
Standard hose lengths include 5 ft, 25 ft, 35 ft, and 50 ft, with part numbers assigned accordingly.
High-pressure air assist airless fluid hoses rated for 1885 psi maximum working pressure, with stainless steel connection options.

Connections and Ordering

Fittings include NPS(F) types; stainless steel connections are available by adding an "SS" suffix to part numbers.
Part numbering follows a systematic scheme based on hose size, length, and connection type.

Applications and Best Practices

Hoses are designed for automotive, wood finishing, and industrial coatings including inks, dyes, and stains.
Select hose size and length appropriate to the application to ensure optimal flow and durability.
Consider stainless steel fittings for enhanced corrosion resistance.

4. Filtration Media and Packaging

Product Categories

GPF Ultra Filters in various sizes and packaging units.
14g Green/White and White filters available in sheets and rolls.
18g White Polyback filters with smaller roll lengths.
Paint pockets and paper-based filters for specific coating applications.
Intake filters including polyester panel and cardboard framed fiberglass types.

Applications

Filters are categorized by industrial use such as general purpose, high solids coatings, and wood finishing.
Packaging units vary from individual pieces to square feet for rolls, aiding inventory management.

5. Spray Gun Troubleshooting and Maintenance

Common issues include pattern defects caused by dried paint, fluid buildup, damaged nozzles, or incorrect air/fluid pressure.
Spitting problems often result from air entering the fluid supply due to loose or damaged components.
Recommended corrective actions include cleaning with appropriate thinners, replacing worn parts, and adjusting pressures.
Use tools softer than brass to avoid damage during maintenance.

6. Coating Transfer Efficiency

The document references baseline transfer efficiency for various application methods such as airless, air spray, HVLP, air assist airless, and electrostatic spraying, emphasizing the importance of method selection to optimize coating transfer.

7. Summary of Critical Parameters and Recommendations

Spray Guns: Multiple configurations with specific needle/nozzle sizes and air caps tailored for application needs.
Tanks: Material choice, capacity, mobility, and agitator type should align with operational requirements.
Hoses: Size, length, pressure rating, and connection type must be selected based on application and durability needs.
Filters: Selection depends on coating type and environmental conditions.
Maintenance: Regular inspection, cleaning, and correct pressure adjustments are essential for optimal spray performance.

Limitations

Significant text corruption and missing graphical data limit extraction of detailed procedural instructions and some technical parameters. However, core product information and configurations remain clear.

Conclusion

This technical document serves as a comprehensive catalog and specification guide for spray gun systems, fluid handling equipment, hoses, and filtration media used in industrial finishing applications. It provides essential data for selecting appropriate equipment configurations, maintaining spray quality, and ensuring operational efficiency despite partial data corruption.

Catalog excerpts

MISSION STATEMENT C.A. Technologies is dedicated to providing the highest quality and most innovative products available, supported by professional and intelligent customer service. Our ongoing product training and guidance, as well as honest and competitive pricing insures our customers the highest value for their investment and continued growth and success for our distributors. Coating Atomization Technologies, LLC P.O. Box 17820 Boulder CO 80308 (888) 820-4498 Fax (303) 438-5708 www.spraycat. com

Open the catalog to page 2

Full access to all our part sheets, specialty literature, training/troubleshooting videos and our part number and price calculators. 20:1 AIR ASSIST AIRLESS UNIT Durable and Dependable Pump lor Continuous Operation italyzed materia Stainless Steel Tanks '& flfO and Application Double Diaoiracm Pumps e 'n*° a>1^ Application video Parti (Introduction/bobcat vs cougar/safety information) Pan I (Setting up your AAA) CUP & TANK OUTFITS PART NUMBER & PRICE CALCULATOR

Open the catalog to page 3

Q: Why do C.A.T. 300, CPR and SLP series nozzles atomize so much better than the competition? A: Our Patented12-Point Balanced Plenum C.A.T. The atomizing air hits our 12-point fluid nozzle behind the air cap and is diffused. It surrounds the fluid in a uniform shroud of atomizing air as it leaves the air cap. Without 12-point diffusion, high and low spikes or hot spots exist as the air leaves the air cap and surrounds the fluid. This results in more uniform SMALL particles. This results in very small and very LARGE particles. A flatter more uniform finish is achieved. Orange peel finish. Why...

Open the catalog to page 5

*All C.A. Technologies spray guns are available in outfits, ie. 1qt. cups, 2qt. cups, tanks and double diaphragm pumps. If you have any questions regarding a spray gun outfit, please visit www.spraycat.com and click on our outfits part number and price calculator or call our customer service. Thank you. LYNX 100H HVLP (General Purpose) The L100H is an industrial general purpose low CFM HVLP air spray gun. The L100H is unique in that it offers a wide range of nozzles that will function with small compressors (2 HP) to spray dyes, spray stains, topcoats and primers. Other air nozzles are available...

Open the catalog to page 6

HVLP FE-Line Fine Finish Finish Excellence The new FE-Line Fine Finish HVLP gun is our new lightweight ergonomic spray gun. The FE-Line Fine Finish is designed around C.A.T. SLP technology. The FE-Line Fine Finish HVLP has been designed for spray stains, toning and consistent color matching applications. The 12-point air diffusion design significantly improves pattern coverage uniformity, process capability and color consistency. The FE-Lines lightweight ergonomic design also reduces fatigue and increases mobility. *Also available in our new CAT Pack, see page 14. FE-Line Fine Finish Specifications:...

Open the catalog to page 7

HVLP JAGUAR 100 HVLP (Gravity, General Purpose) The J100H is a general purpose gravity feed gun intended for automotive and wood finishing. Features include all stainless steel fluid passages, low volume nozzles for small HP compressor use and self-adjusting needle packing. Comes standard with 750cc aluminum gravity cup. This gun complies with all HVLP environmental regulations. *Also available in our new CAT Pack, see page 14. Specifications: Air Inlet 1/4 NPS (m) Fluid Inlet 16m x 1.5 Weight 25 oz. Standard Nozzle Setup: 1.4 x 1093 - Requires 10 CFM (other nozzles available) Repair Kit P/N...

Open the catalog to page 8

COMPLIANT CPR-G - C.A.T. Pressure Reduced (Fine Finish) Once again C.A.T. is proving why we are the technology leading spray gun manufacturer. This is the newest compliant technology on the market. The CPR spray guns from C.A.T. combine the transfer efficiency of HVLP with the speed and finish quality of conventional air spray. The nozzle requires 11cfm at 29 psi recommended inlet pressure. The CPR guns are available in two types of packs, one for the automotive industry, and one for the wood industry. These kits will also be available with your standard 1qt. aluminum gravity cup or the popular...

Open the catalog to page 9

CONVENTIONAL LYNX 100C (General Purpose) The LYNX 100C is a general purpose conventional air spray gun for spraying a wide range of coatings. Designed for production use, the L100C is perfect for all coatings from thin to thick. May also be used with internal mix nozzles as well as carbide tipped fluid nozzles for abrasives. This gun features a self-adjusting needle and air valve packing, air adjusting valve and rugged construction. The LYNX gun comes standard with all stainless steel fluid passages. Specifications: Air Inlet 1/4 NPS (m) Fluid Inlet 3/8 NPS (m) Weight 20 oz. Standard Nozzle Setup:...

Open the catalog to page 10

CONVENTIONAL TOMCAT 100C (General Purpose) The T100C is an economical general purpose conventional air spray gun for spraying a wide range of coatings. Designed for production use, the TOMCAT is perfect for all coatings from thin to thick, stains to glue. Can also be used with internal mix nozzles as well as carbide tipped fluid nozzles for abrasives. This gun features a self-adjusting needle packing, inexpensive nozzle replacement and rugged construction. Specifications: Air Inlet 1/4 NPS (m) Fluid Inlet 3/8 NPS (m) Weight 19 oz. Pressure and siphon setups available. Standard Pressure Setup:...

Open the catalog to page 11

CONVENTIONAL PANTHER 200Z (Zinc Rich) The P200Z is a rugged, general purpose, conventional air spray gun designed for spraying zinc-rich coatings. Our P200Z has a Delrin tipped fluid nozzle to prevent plating and a unique leather / Teflon packing arrangement that increases your spraying time before the gun needs to be cleaned. The body and air cap are Teflon anodized to aid in clean-up and extend the life of the gun. This gun comes standard with air-adjusting valve, stainless steel fluid passages and heavy-duty needle return spring. *Also available in our new CAT Pack, see page 15. PANTHER P200Z...

Open the catalog to page 12

HVLP AMCPR (Fine Finish) The AMCPR From C.A.T. combines the transfer efficiency of HVLP with the speed and finish quality of conventional air spray. Included with each AMCPR are the CPR and HVLP air cap for multi-application purposes. Each AMCPR has the ability to be used in circulating or non circulating systems and are block mount ready for flatline machinery. Specifications: Air Inlet 1/4 NPS (m) Fluid Inlet 3/8 NPS (m) Weight 24 oz. 23-2101 (CPR) - Consumes 11 cfm @ 29 psi gun inlet 23-1302 (HVLP) - Consumes 13.5 cfm @ 45 psi gun inlet Repair Kit P/N 10-146 Available with standard manifold....

Open the catalog to page 13

All C.A.Technologies catalogs and technical brochures

Archived catalogs

Catalog 2007
35 Pages