STACKER TRUCKS_2019
16Pages

ADAPTABLE POWER STACKER TRUCKS 1.0 - 2.0 tonnes

This range of Cat® stacker trucks is built around powerful, programmable AC motors that can match almost any storage and retrieval application in your warehouse. Designed for stacking pallets up to 6.5 metres and for horizontal transport, these stackers are ideally suited to applications in retail, distribution and manufacture. There are twenty eight different models, including Initial lift (I) and Straddle (S) variants, to choose from. Your Cat lift truck dealer can advise you on the best combination to match your unique requirements and deliver the best return on your investment. 28...

MAJOR BENEFITS FOR YOUR OPERATION The Cat range of stacker trucks includes pedestrian, platform, stand-on and sit-on models designed for stacking pallets up to 6.5 metres and for horizontal transport over both short and long distances. They're available in a wide variety of masts and nominal capacities from 1.0 to 2.0 tonnes. The range includes straddle (S) models for handling wide loads and initial lift (I) models with greater ground clearance allowing for operation on ramps and uneven surfaces. CONTENTS PAGE SIT-ON STACKERS EASY SERVICE ACCESS 13 The 'pedestrian' and 'platform' trucks are...

AC drive motors give excellent traction and ramp performance, even when laden. They're virtually maintenance-free and have a relatively low energy consumption compared to traditional DC motors. The stackers can be set up to match application requirements using the programmable electronic controller, so that travel speed, acceleration, lift and lowering speeds can be set for the safe handling of fragile loads, for instance. The PoweRamic masts, available on some models in the range, are rigid and strong, giving excellent performance at height with high residual capacities. They're also...

ADAPTABLE POWER (Pictured far left, from top) The NSV12-16P range of platform stackers includes Initial lift (I) versions that allow ground clearance to be increased for ramp work. The NSP16N2 range includes Straddle models (S) with a foldable platform that allows working with UK-pallets in confined spaces. The NSR12-20N stand-on trucks for stacking up to 6.5m and shuttles over longer distances. (Main picture) The NSS20N sit-on stacker handles loads up to 2 tonnes, stacks up to 6.5 metres and is efficient over long distances for horizontal transport.

16 MODELS TO CHOOSE FROM MODEL CAPACITY TYPE MAX. SPEED VOLTS/ (tonnes) (km/h) Ah DESIGNED FOR SHORT SHUTTLE APPLICATIONS AND STACKING UP TO 5.4 METRES HIGH. This range of pedestrian stacker trucks incorporates all the latest technology to provide a reliable and productive handling workhorse for any warehouse. Fleet managers will be impressed by the low running costs and productivity boost that result from the trucks' water- and dirt-resistant construction, their overall robustness and the energy-saving programmable drive options. Maintenance staff will appreciate the straightforward access...

(Pictured clockwise from left to right) Ergonomic tiller head designs bring user-friendly controls within easy reach for precise and safe operation. Initial lift variants, (NSP12/14/16N2I), allow ground clearance to be increased for ramp work. By straddling, the NSP16N2S/R trucks are able to handle bottom-boarded or extra-wide loads. Compact pedestrian stacker NSP12PC is the narrowest and lightest of all (at 660 mm and 775 kg including maximum battery). (Main picture) Operators have clear views through the masts for safe and accurate handling, reducing potential damage to loads, forks and...

DESIGNED FOR STACKING UP TO 5.4 METRES AND HORIZONTAL TRANSPORT OVER ALL DISTANCES. These versatile platform stackers can be used in pedestrian or ride-on mode, with a platform which folds flat against the chassis - to save space - when not needed. They are adaptable to a diversity of applications in narrow spaces, including occasional order picking. The NSV12P offers a 1.2 tonne capacity, for lighter duties, but is equipped to the same high standard as the other models. There is also a 1.2 tonne initial lift model, NSV12PI. The NSV16P handles loads up to 1.6 tonnes. In addition to the...

DOWNLOAD SPEC SHEET STAND-ON STACKERS DESIGNED FOR STACKING UP TO 6.5 METRES AND HORIZONTAL TRANSPORT ACROSS THE LONGER DISTANCES IN YOUR WAREHOUSE. This compact range of stand-on stackers is ideal in high-stacking situations and for horizontal movements up to 80 metres and beyond, particularly where operators need frequent and easy on-off access. Precision-engineered for fast travel and fast lifting speeds, these trucks are ideal for work in aisles too narrow for reach trucks. Extendable side stabilisers (standard with triplex masts, optional on simplex and duplex) support high residual...

(Inset picture) Side stabilisers improve residual capacity when working at height. (Main picture) Low step and easy on-off access make these stackers comfortable and easy to use.

DOWNLOAD SPEC SHEET SIT-ON STACKERS DESIGNED FOR STACKING UP TO 6.5 METRES AND HORIZONTAL TRANSPORT IN THE LARGEST WAREHOUSES. The NSS15-20N range of sit-on stackers benefits from the same productive features as the ‘ride-on’ models: AC power and programmability; durable chassis and mast construction; high residual capacities; and automatic speed reduction in curves and at increased lift heights. There is also an initial lift (I) model, the NSS15NI, which is designed for applications on ramps and uneven floors. Your drivers are well protected by the wraparound chassis, while the adjustable...

EASY SERVICE ACCESS THE STACKER RANGE HAS BEEN DESIGNED FOR EASY MAINTENANCE AND SERVICING. All trucks benefit from easily opened panels and covers, as well as swing-out seats on the NSS15-20N sit-on models, for quick service access to all components. Although the powerful AC drive motors are virtually maintenance-free, built-in diagnostics monitor truck performance to minimise essential servicing downtime. Battery exchange is also quick and easy, using standard battery rollers to maintain high shift productivity. More information on maintenance programmes and other dealer services are...