Catalogs >
CASTROL Industrial >
Techniclean MTC 43

Techniclean MTC 43
1Pages

Catalog excerpts

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents. > Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation. > Compatible with common soluble coolants andmetal substrates Keeps machine tools in a clean and efficient condition Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts Kills bacteria and fungis Emulsifies floating tramp oil Low foaming properties No further corrosion protective required Used whilst machines are operating normally > An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate) Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor return channel. This ensures complete mixing with the coolant. Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours. Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 -3% dilution of Techniclean MTC 43. Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures. Rinsing with a fresh coolant (about 1%) is recommended. > Appearance, Clear, colourless to light yellow liquid Relative Density @ 20C, kg/mԇDIN 51 757 1054 pH (5% of solution), approx. 8,5 Appearance of a 5 %solution in watercloudy turbid Castrol International Pipers Way Swindon SN3 1RE United Kingdom Tel +44 (0)1793 452111 Fax +44 (0)1703 486083 > All reasonable care has been taken to ensure that the information contained in this publication is accurate at the date of printing. Itshould be noted however that the information may be effected by changes subsequent to the date of printing in the blend formulationor methods of application of any of the products referred to or in the requirements of any specification approval relating to any suchProducts size="-1">

Open the catalog to page 1