*mydirectindustry

SafeCoat DW 10

Product catalog summary

Product Overview
Castrol SafeCoat DW 10 is a high-quality dewatering fluid designed to remove water from components after processes such as electroplating or machining with soluble cutting fluids. It leaves no perceptible film upon evaporation.

Applications
This product is ideal for surfaces that cannot be subjected to heat for drying, preventing water spots on polished or plated components. It is most effective when components are immersed in a dip tank, although it can also be applied by spraying.

Advantages

Low aromatic solvent with less than 0.5% aromatic content.
Excellent water displacement and penetration properties.
Cost-effective and efficient compared to compressed air drying.
Prevents water spots on sensitive surfaces like polished glass or chromium-plated components.
Does not interfere with the adhesion of paint or other protective coatings.
Highly stable against acidic and alkaline contaminations, making it suitable for the electro-plating industry.

Characteristics

Appearance: Clear, colorless fluid.
Relative Density at 15°C: 790 kg/m³.
Flash Point: Greater than 61.5°C (ASTM D 93).
Film Type: No film formation.
Total Film Forming Content: 0%.
Drying Time at 20°C: 30 minutes.

Additional Information
Material Safety Data Sheets (MSDS) are available for all Castrol products and should be consulted for safe handling and disposal. Corrosion protection data is based on standard laboratory tests and may vary depending on application and environment. For further advice, contact your local Castrol representative.

All CASTROL Industrial catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list