Hyspray E 2000 Issue Number 1 03/07/2006 DESCRIPTION Hyspray E 2000 is a premium cutting fluid which has been formulated using specially selected advanced ester technology. APPLICATION Hyspray E 2000 has been designed for spray mist application and can be used for sawing, turning, drilling, milling and threading operations on aluminium, ferrous, non-ferrous and steel alloys. Hyspray E 2000 should be used in combination with spray mist application equipment. Superior additive technology High cutting efficiency Excellent spray mist properties High flashpoint Low odour High oxidation stability Chlorine free Heavy metal free Ashless technology Technical Data Properties Appearance Density @ 20°C Viscosity @ 40°C Flashpoint Unit Visual kg/m3 mm²/s °C Data Pale (almost colourless) 930 28 280 Health and Safety information sheets are available for all Castrol products from the address below: Castrol (U.K.) Limited, Pipers Way, Swindon, Wiltshire SN3 1RE, England, Telephone: Orders/Enquiries (08459)645111, Technical Enquiries (01793)452111, Fax (01793)486083 All reasonable care has been taken to ensure that the information contained in this publication is accurate as at the date of printing . It should be noted however that the information above may be affected by changes occurring subsequent to the date of printing in the blend formulation or methods of application of any of the products referred to or in the requirements of any specification approval relating to any such products .