Catalogs >
CASTROL Industrial >
Castrol SafeCoat DW 10

Castrol SafeCoat DW 10
1Pages

Catalog excerpts

Castrol SafeCoat > TM DW 10 is a high quality powerful dewatering agent which, upon evaporation, leaves no perceptible film. > SafeCoat DW 10 rapidly removes water from components subsequent to electroplating processes, after machining using soluble cutting fluids, or parts that have been washed. SafeCoat DW 10 specifically can be used for the treatment of surfaces which cannot be subjected to heat to accelerate drying, and also avoids the formation of water spots upon polished or plated components. Although SafeCoat DW 10 can be applied by spraying, its dewatering action is most effective if articles to be dried can be immersed in a dip tank. > Based on low aromatic solvent (aromatic content less than 0.5 %). Excellent water displacing and penetrating properties. Economical and efficient alternative to compressed air drying. Complete absence of water spots when dewatering sensitive surfaces, such as polished glass or chromium-plated components. Does not hinder adhesion of paint or other subsequent protective coatings. High stability against acidic and alkaline contaminations, highly suitable for the electro-plating industry. > Appearance - Visual Clear colorless fluid Relative Density @ 15 > o C > kg/m - 790 Flash Point ӰC ASTM D 93 > 61/142 Film Type - - No film Total Film Forming Content % - 0 Drying Time @ 20 > o C Min - 30 > Castrol SafeCoat DW 10 06/12/2005, Global Version Number 1 Castrol, SafeCoat and the Castrol logo are trademarks of Castrol Limited, used under licence. All reasonable care has been taken to ensure that the information contained in this publication is accurate as of the date of printing. However, such information may, nevertheless, be affected by changes in the blend formulation occurring subsequent to the date of printing. Material Safety Data Sheets are available for all Castrol Ltd products. The MSDS must be consulted for appropriate information regarding storage, safe handling and disposal of a product. The corrosion protection data is based on standard corrosion tests under laboratory conditions and should be used as a guide only. Corrosion protection time may vary dependent on application and the environment. Consult your local Castrol representative for advice. Castrol Industrial North America Inc. 150 West Warrenville Road, 605 3E Naperville, IL 60563 Tel: (877) 641 1600 Fax: (877) 648 9801 www.castrol.com/industrial size="-2">

Open the catalog to page 1