GAP - 8 Pages

Add to MyDirectIndustry favorites
GAP

Catalog excerpts

Plasma Transferred Arc Technology EuTronic® GAP The Castolin Eutectic PTA process The complte range of power sources for Plasma Transferred Arc welding  For plasma joining, coating andbrazing 蕕 For manual, serniautornatic or fully robotised applications  AC/DC version available for the welding of Al, Mg andtheir alloys Օ Completely modular for immdiate, tailor made configuration and cost effective fitting of applications  Wide range of options, accessories and welding consumables Castolin Eutectic Eutectic Castolin

 Open the catalog to page 1

Why EuTroTiic® GAP The EuTronic® GAPistheCastolin Eutectic Plasma Transferred Arc (PTA) process idal for jon鯯ng and coating oprations. In the PTA process, the plasma is focused while forced through the heat rsistant anode, causing a consid驩rable increase ofthe arc density, energy and temprature. The welding filler alloy, in microatomised powder or cold wire form, is conveyed into the plasma arc column where a shielding gas protects the weld pool from the atmosphre. The plasma arc and the heat input can be far better con-trolled than a conventional electric arc and the energy is almost...

 Open the catalog to page 2

EuTronic® GAP 2001 DC The EuTronic®GAP 2001, is idal for welding applications re-quiring prcision, high quality of the deposit and low dilution on individual parts or small s驩ries of pices, where full auto-mation is not convenient or applicable. It is available in two diffrent versions, with sp詩cifie individual features; each one of them can be requested with ( "Powder" type) or without external feeders motor control card: EuTronic® GAP 2001 DC Touchscreen: Is the Castolin Eu-tectic Micro Plasma PTA power source, suitable also for joi-ning of thin plates or prթcise tool and die coating and...

 Open the catalog to page 3

The idal choice for manual or semiautomatic opration The new EuTronic®GAP 2001 bas been specifically designedfor ail those applications where afull automation is not required, con-venient or applicable. The EuTronic®GAP 2001 is available in tbe Basic andToucbscreen version, witb sp驩cifie individual features; eacb one of them can be requested witb ( "Powder" type) or witbout feeders' motor control card: Toucbscreen version: tbe Micro Plasma inverter, a big step closer to laser welding at a reasonable cost, allows internai setting of tbe parameters of a single and simple program, tbat can be...

 Open the catalog to page 4

Born for fullyautomated applications The new EuTrcnic*GAP 300X sries has been speofically developed for implementation of fully automated applications: standard plasma gas electronic control valve, powerful PLC, flexible 72 pin Harting plug automation interfaces (available on request), up to 100 memory cells for storing of welding routines, additional (optional) software package for better control and display of ail the process parameters are the main features of thse new state of the art power sources. EuTronic*G騀P 3001 DC: powerful and modular can be easily adapted to almost any...

 Open the catalog to page 5

Complte Range of Options and Accessories for every application TTie power sources of the new EuTronic*GAP range, due to the modular design, can be adapted to any application just choosing the right accessories. Manualorfoot remotecont rois are avait able for extra comfort and easeof use TwoEP2canbedriven in paralW{ontyby power sources with the optiona second motor control card) for applications that require feeding of diff让rent powders in the weld pool: ie. matrix and car bides. RC-H manual remote COntTOl: ESC 260231 Powder Feeder EP2:ESC 260229 including 8 mtres Connecting cable RC-F foot...

 Open the catalog to page 6

Single or twin circuit cooling unit*, addi tional waterwater heat exchanger isavaflaWeon rcquetL Cooling GAP (*): ESC 260058 Weight; 40 kg Dimensions (LxWx H): 900x445x 360mm Cooling CAP Twin: ESC 260059 Weight: 45kg Dimensions (LxWx H): 900 x 445 x 360mm H U*o onry Castolin EuUctfc o#dkatsd cooling llquid Wice range of additional trays and accessories for better configuration and ease of use of the trolley Trolley: ESC 260056 Weight: 45 kg Dimensions (L x W x H): 1.190 x 740 x1.415 mm Holds gas bot t les, powder feeder. power source and cooler Castolin Eutectic GAP Torches If power sources...

 Open the catalog to page 7

Application Oriented Design Castolin Eurecticdevelopsand manufactures GAP welding units and accessories in various models and sͮzes either as standard units or as spcial developments, Our team of technicians is able to design the cost effective and tailor made solution to fit your spcifie application. Frorn power source to feeding units, welding torches, even handling devices or robots when required, we take care of ail the d驩tails. Let our specialists surprise you. we never talk about products, but only of applications and solutions toyour enquiries and ncessitiez CastolinEutecticGAP...

 Open the catalog to page 8

All Castolin Eutectic catalogs and technical brochures

  1. OTW 10SS

    2 Pages

  2. TeroMatec

    12 Pages

  3. DH range

    4 Pages

  4. CastoDur

    12 Pages

  5. CastoTubes

    4 Pages

  6. TeroCote ®

    8 Pages

  7. PowerTec

    5 Pages

  8. OTW range

    8 Pages

  9. SteelTec

    8 Pages

  10. CastoLab

    12 Pages

  11. OilTec

    8 Pages

  12. Steel

    8 Pages

  13. Mining

    12 Pages

  14. Cement

    8 Pages

  15. ID WELD 2501

    2 Pages

Archived catalogs

  1. wear plates

    2 Pages

  2. CastoMIG

    12 Pages

  3. XuperTIG

    8 Pages

  4. XuperMax²

    2 Pages

  5. UltraMax²

    2 Pages