Catalog excerpts
Twin Wire Arc Spray Technology New contact tubes with screw tip design New improved powerful drive unit • For anti-wear and anti-corrosion cold arc sprayed coatings • Continuous operation at 350 amps for high productivity • Reliable Push Pull system for spraying up to 20 m in all positions • Allow complete use of all the wire, unlike push only system • New air cooled contact tubes with wear resistant tips • Double grooved feed rollers for double operation life • Roboti
Open the catalog to page 1EuTronic Arc Spray 4 HF EuTronic Arc is the highest productivity thermal spraying process. EuTronic Arc is an Arc Spray Process using a pair of wires which are melted by an electric arc. This molten material is atomised by compressed gas and propelled towards the workpiece to form a coating. EuTronic Arc is a cold spray process having the advantage of not requiring the use of oxygen, kerosene or a combustible gas which means more economic coatings. Low running costs, high spray rates and efficiency make it a good tool for spraying extensive areas or a large number of parts. EuTronic Arc...
Open the catalog to page 2EuTronic Arc Spray 4 HF EuTronic Arc Spray 4 HF system The EAS4 HF was developed to improve running costs, coating deposition and ease of maintenance. The Arc Gun and the drive system are coupled to a 350 amp, switched voltage power source. This power source features sealed electronics for excellent reliability in the harshest of spray environments. The wire feeder unit is neatly mounted on the power source, leaving it free to swivel and follow the operator whilst spraying. There is no motor in the gun. Instead, the Gun 4 uses a patented 'Synchrodrive' system, where a single, sealed motor...
Open the catalog to page 3EuTronic Arc Spray 4 HF Proficiency for arc spray applications with EuTronic Arc Wires : EuTronic Arc Wires are unique, specially formulated for Arc Spraying to provide industry with wear and corrosion protection solutions. The EuTronic Arc Spray 4 system is designed to spray solid and cored wires for many different applications with outstanding results. Spray rates from 8 to 36 kg / hr can be achieved depending on the sprayed alloy. Typical applications : • Offshore/oil & gas • Pulp and paper • Steel works • Shipbuilding/ marine • Structural steelwork • Anti-wear coatings • Bridges...
Open the catalog to page 4All Castolin Eutectic catalogs and technical brochures
-
EutecTrode®
12 Pages
-
MICRO GAP 50 DC
2 Pages
-
CastoJet® CJK5
2 Pages
-
EuTronic® Arc Spray Wires
8 Pages
-
EuTronic® Arc 525 AS
2 Pages
-
EuTroLoy PG 6606
2 Pages
-
EuTroLoy 16457
2 Pages
-
EuTroLoy 16365G
2 Pages
-
OTW 10SS
2 Pages
-
TeroMatec
12 Pages
-
DH range
4 Pages
-
CastoDur
12 Pages
-
CastoTubes
4 Pages
-
Eutalloy ® - Eutalloy ® SF
12 Pages
-
TeroCote ®
8 Pages
-
hardbanding_oil_gas_industry
2 Pages
-
DERBY 425 DS II
2 Pages
-
MICRO GAP 50 DC
4 Pages
-
XuperMIG 3000
2 Pages
-
Castolin Eutectic
48 Pages
-
CastoJet ® HVOF Powder
2 Pages
-
EuTronic ® GAP 2501 DC
4 Pages
-
XuperArc 3200 / 4000 / 5000
2 Pages
-
PowerTec
5 Pages
-
GreenBraz-brazing
12 Pages
-
OTW range
8 Pages
-
GlassTec Brochure
4 Pages
-
SteelTec
8 Pages
-
Distribution Catalog
32 Pages
-
CastoLab
12 Pages
-
OilTec
8 Pages
-
Waste and Recycling
8 Pages
-
Steel
8 Pages
-
Mining
12 Pages
-
Cement
8 Pages
-
GoodAire 1202 ®
2 Pages
-
ID WELD 2501
2 Pages
Archived catalogs
-
wear plates
2 Pages
-
GAP
8 Pages
-
CastoDyn SF Lance
2 Pages
-
CastoMIG
12 Pages
-
XuperTIG
8 Pages
-
CastoTIG 2201 DC
2 Pages
-
CastoTIG 1501 DC
2 Pages
-
XuperMax²
2 Pages
-
UltraMax²
2 Pages