*mydirectindustry

Catalogs
Castolin Eutectic
CastoTIG 1501 DC

CastoTIG 1501 DC

Product catalog summary

Overview: The CastoTIG 1501 DC is a compact and lightweight dual TIG and MMA welding system designed for use in construction, installation, repair, and maintenance. It operates with a 150 A welding current from a 230 V power source and is microprocessor-controlled for high-tech performance.

Specifications:

Welding current range: 5 - 150 A
TIG welding current at 35% duty cycle: 150 A; at 100% duty cycle: 100 A
Arc voltage: MMA 20 - 25.6 V / TIG 10 - 15.6 V
Mains voltage: 1 x 230 V / 50/60 Hz
Open circuit voltage: 54 V
Mains fuse required: 16 A (slow-blow)
Input power at 100% duty cycle: 5.9 kVA
Power efficiency at 35%: 0.85
Degree of protection: IP 23
Weight: 5.7 kg
Dimensions: 360 x 120 x 215 mm

Features:

Generator compatibility with a minimum 6 kVA output
Robust construction for easy handling
Fault-tolerant operating concept with improved menu guidance
Electronic high-frequency ignition system for non-contact arc strike
Switchable to “Lift-Arc” ignition for sensitive areas
Pulse mode with full pulse control functions
2-cycle and 4-cycle processes included
CE symbol and “S” marking for safe operations in high electrical risk areas

Setting Ranges:

Welding current: 5 - 150 A (TIG), 5 - 140 A (MMA)
Gas pre-flow period: 0 - 3 s
Up-Slope: 0 - 20 s
Down-Slope: 0 - 20 s
Gas post-flow period: 0 - 20 s
Pulse frequency: 0.5 - 250 Hz

Catalog excerpts

Tungsten Inert Gas (TIG) and Manual Metal Arc (MMA) welding CastoTIG 1501 DC ■ Exceptionally compact, lightweight, dual TIG and MMA welding system 150 A welding current from a 230 V power source Microprocessor-controlled high-tech inverter power source Ideal for use on construction sites, installation work, repair and maintenance ■ ■ ■ WEAR & FUSION TECHNOLOGY Castolin Eutectic Eutectic Castolin

Open the catalog to page 1

CastoTIG 1501 DC - Top-class portable welding equipment The CastoTIG 1501 DC primary switched-mode welding rectifier is a further development of the tried and trusted transistor-controlled Castolin Eutectic inverter. This compact microprocessor-controlled unit has been specially designed for direct current TIG welding operations, but also offers an ideal solution for Manual Metal Arc Welding (MMA). ■ Easy to use for either on site construction, installation or repair work: compact size, minimum weight, very low power con-sumption with generator compatibility (Min. 6 kVA generator output). ■ Manoeuvrable...

Open the catalog to page 2

All Castolin Eutectic catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list