Catalogs >
CASSESE >
CS999

CS999
2Pages

Catalog excerpts

CS999 HIGH SPEED DOUBLE MITRE SAW The Cassese CS999 Saw has been especially designed for the high volume contract framers. This saw delivers the fastest production capacity possible from a single machine, and has been recognised as the fastest automated double mitre saw on the market. The CS999 offers the highest level of productivity, without compromising quality. FEATURES OF THE CS999 SAW • Fast Capable of producing up to 1000 cuts per hour. • 350mm (14" inches) blades • Vertical cutting stroke Fast production without sacrificing quality. • Cast iron internal structure Avoids disadjustments of mechanical parts and consequently gives maximum reliability. • Concrete base For maximum stability, no vibrations and perfect cuts. • Horizontal & Vertical pneumatic clampings Four built in & adjustable. They flatten the moulding if bent, and ensure that the moulding cannot move or rock during the cutting operation. • 45˚ measuring scale Allows a direct, speed and accurate measuring • Minimum waste stop To save mouldings at each first cut. • Adjustable speed control Allows quality cutting of different hardness of timbers or synthetic mouldings without changing the blades. • Adjustable Blades' Height This enables the operator to set the saw for the shortest possible cutting stroke, reducing unnecessary motion of the cutting cycle and increasing productivity. • Two measuring stops Enables the cutting of both frame dimensions, one after the other. • 1.5m support arms Robust feed-in support arm, and feed-out measuring arm. • Automatic dust extraction The dust extractor is pre-wired to the saw, so that both machines run and stop simultaneously. This reduces power consumption and excessive noise. • Two rear dust extraction ports This dramatically increases dust extraction efficiency and improves cleanliness. CASSESE SARL - 8 rue Denis Papin - Zone Industrielle - 77390 Verneuil l'Etang - France Tel: + 33 (0) 164 42 49 71/73/74 - Fax: + 33 (0) 1 64 42 58 94 - Web Site : www.cassese.com

Open the catalog to page 1

SAFETY FEATURES • CE approved Satisfying the highest safety standards in the world. • Meets the new EU Regulation for Health and Safety The new EU health and safety regulation requires that dust present in air must be less than 2mg/m3 in the working area. Our CS969 ensures you less than 1mg/m3 dust in air (provided you connect the CS999 to a dust collector meeting the new EU regulation as well) • Ergonomic two button operation Keeps hands away from the cutting area. • Safe design Completely enclosed with no exposed motors or blades • Time delay hood latch The main guard has a safety delay...

Open the catalog to page 2