Catalogs >
CASSESE >
CS88 & CS89 - FOOT or AIR OPERATED UNDERPINNERS (v-nailers)

CS88 & CS89 - FOOT or AIR OPERATED UNDERPINNERS (v-nailers)
1Pages

Catalog excerpts

CS88 & CS89 - FOOT or AIR OPERATED UNDERPINNERS (v-nailers) - 1

CS88 & CS89 FOOT OR AIR - OPERATED UNDERPINNER The CS88 & CS89 have been the most popular models in the world for over 15 years, and thus their reputation and reliability are proved. Although manufactured to the highest standards, the prices of the CS88 & CS89 remain very competitive. FEATURES OF THE CS88 & CS89 : • Cassese wedges cartridge system Easy change of wedge size with no need to adjust or change any part on the machine. All Cassese underpinners are able to use the full range of Cassese cartridge wedges in 7 different sizes, available in both softwood and hardwood. •Adjustable joining angle It is possible to adjust the joining angle of the fences to correct the gap if the cutting angle is not perfectly at 45°. • Patented self-adjusting fences Are adaptable to the shape of any moulding profile, to prevent gaps in the top or bottom of the join. • Horizontal rebate clamp Secures the moulding pieces together to ensure perfect alignment of the mitres while joining. • Quick-Change top clamp To adjust between softwood and hardwood and different mouldings' shapes. • 2 positioning stops (front and back) allow wedges to be stacked up, even in hardwood. • Unique triangular design table Makes it easy to adapt to the corner of a workbench, which assists in supporting the frame while joining. • CS 88 Foot operated Mobile foot pedal The pedal position can be easily changed between the back or the front of the machine, and can also be set up for either left or right foot operation. Unique pulley and cable drive system Multiplies the force applied on the foot pedal more than 3 times, thus making it easy for the operator to drive wedges into the hardest timbers. • CS 89 Air operated : Pneumatic double-stage pedal Permits the operator to clamp the mouldings and visually check the join before inserting the wedge. No pressure adjustment required When changing between softwood and hardwood. Mouldings Width ONLY FOR CS89 Smallest internal frame size Included Accessories Optional Accessories 31 kg 6 bars using 3 litres / cycle CASSESE SARL - 8 rue Denis Papin - Zone Industrielle - 77390 Verneuil l'Etang - France Tel: + 33 (0) 164 42 49 71/73/74 - Fax: + 33 (0) 1 64 42 58 94 - Web Site : www.cassese.com

Open the catalog to page 1