CS4008XL
2Pages

{{requestButtons}}

Catalog excerpts

CS4008XL - 1

CS4008XL: PROGRAMMABLE MEMORY UNDERPINNER The CS4008 XL is the Cassese machine for the 21st century. Fast performance and heavy duty design for high production, programmable memory with touch-screen interface for ease of use, and of course, Cassese quality corners! Simple, user friendly programming Touchscreen tells operator which wedge size and accessories to use. Stores up to 3000 profiles in memory. Unlimited profiles if full parameter barcode and scanner used. Fast setup time Thanks to its memory, the 4008XL makes it easy to change from a small photo frame to a large moulding within a few seconds. High production capacity Very fast! Up to 3360 corners per hour (2 positions per corner). Wide joining capacity : 190mm stroke (7’’ ½) For mouldings up to 150mm wide (6’’) and 112mm tall (4’’ 2/5) Ultra Powerful Double-action « push and tighten » rebate clamp Position one of the moulding pieces up to the guide, then lay the second piece roughly place. The special action of the clamps draws them accurately and firmly together. Indeed, the clamps literally bite into the rebate of the 2 pieces of mouldings to pull and tighten them very strongly against each other. This ensures a high quality join every time, even on very wide mouldings. This is unique to Cassese. New retractable Ultra clamp system Patented “Ultra” clamp system now retracts into table leaving a flat surface. Great for handling big frames! Built-in extension arms for large frames Built-in networking and barcode set-up abilities Built-in ability to read and setup from barcode labels. (Optional scanner and software required.) 9 programmable wedge positions Stacks up to 9 wedges in each position. Patented adjustable fences Adjusts for “less than perfect” 45˚ cuts and backs not 90˚ to b ottom, in order to prevent gaps in the top or bottom of the join. New magnetic XL adjustable top clamp Quickly adjust hold down height. Just change rubber end for hardwood or softwood. Now with quick-change magnetic holddowns. No tools required to change wedges’ sizes Uses only genuine Cassese patented cartridge wedges. They are color coded with a full range of sizes available (3, 4, 5, 7, 10, 12, & 15 mm) most available in hardwood and softwood versions. Quality and performance ! CASSESE SARL - 8 rue Denis Papin - Zone Industrielle - 77390 Verneuil l'Etang - France Tel: + 33 (0) 164 42 49 71/73/74 - Fax: + 33 (0) 1 64 42 58 94 - Web Site : www.cassese.com

Open the catalog to page 1
CS4008XL - 2

No pressure adjustment required when changing between softwood and hardwood. Cartridge loading activated by pneumatic cylinder No more wedge pusher spring! 2-stage pneumatic clamping pedal Allows the operator to clamp the mouldings and visually check the join before inserting a wedge. Can also work in « AUTOMATIC » mode : just 1 push on the pedal will clamp and join just afterwards. Wedge sensor Thanks to the new pressure sensitive wedge sensor, the CS4008XL will never miss a wedge in any corner, even if the cartridge runs out mid-way through joining a corner. The join remains clamped while...

Open the catalog to page 2

All CASSESE catalogs and technical brochures

  1. FB7000

    1 Pages

Archived catalogs

  1. CS 940

    1 Pages

  2. MACH 1 CART

    1 Pages

  3. CS 55M2

    1 Pages

  4. CS 1 UNI

    1 Pages

  5. MACH 4 CART

    1 Pages

  6. CS 200 CART

    1 Pages

  7. CS20CART

    1 Pages

  8. Staple Guns

    1 Pages

  9. CS 2 UNI

    1 Pages

  10. CS4008UNI

    2 Pages

  11. CS1CART

    1 Pages

  12. CS299MXL2

    1 Pages

  13. CS199MXL

    1 Pages

  14. CS969

    3 Pages

  15. CS999

    2 Pages

  16. FLEXIGUNS

    1 Pages

  17. MF10

    1 Pages

  18. MF40

    1 Pages

  19. CS55M

    1 Pages

  20. MACH1 UNI

    1 Pages

  21. CS2 Cart

    1 Pages