TR310B
1 /4Pages

TR310B

TR310B
1 /4Pages

Catalog excerpts

TR310B-1

TR310B COMPACT TRACK LOADER TIER 4 FINAL CERTIFIED LIFT GEOMETRY auxiliary hydraulic control – on joystick; Advanced Instrument Cluster w/ digital hour meter, tachometer, Fuel level LCD bar graph w/ alarm, diagnostic features and security lockout. Radial Lift DRIVETRAIN Drive pump controls Servo-assist mechanical Pump to engine ratio 1:1 Displacement 2.81 in3 (46 cm3) Flow @ rated engine RPM: @ 97% efficiency 29.4 gpm (111 L/min) Charge pressure 360 psi (24.5 bar) System relief pressure 5,220 psi (360 bar) ENGINE Model Emissions Certification Type Fuel injection Direct, high pressure common rail – HPCR Fuel filter: Pre-filter Main filter Air intake Beta (30) = 200/spin-on Beta (4) = 20/spin-on Turbocharged w/ waste gate and external cooled EGR Exhaust aftertreatment Diesel Oxidation Catalyst (DOC) Drive pump controls Electro-hydraulic Pump to engine ratio 1:1 Displacement 2.75 in3 (45 cm3) Flow @ rated engine RPM: @ 97% efficiency 28.8 gpm (109 L/min) Charge pressure 362 psi (24.5 bar) System relief pressure 5,220 psi (360 bar) Drive motors: Max. displacement 3.10 in3 (50.9 cm3) Displacement: High speed 2.02 in3 (33.1 cm3) Motor RPM @ high idle and 97% efficiency: 2-speed 156 Motor torque @ max. displacement and relief pressure, calculated @ 5,220 psi (360 bar): 4,654 lb·ft (6 310 N·m) Travel speed: Low range High range Final drive: Planetary gearbox w/ 2-speed motor Tractive effort Engine speeds High idle – no load Rated – full load Low idle Parking brake: Type Spring-applied, hydraulic release multiple disc. Engagement Depress on/off brake button on handle or instrument panel, raise seat bar, get off seat or stop engine. Horsepower @ 2500 RPM – SAE J1349: Gross 74 hp (55 kW) Net 68 hp (51 kW) Peak torque @ 1400 RPM Radiator: Core type Core size area Rows of tubes x columns Cap pressure Fan: Diameter Ratio Water pump: Style Flow ELECTRICAL Alternator 20.4 in (518 mm) 0.96:1 standard, 1.1:1 high-flow Centrifugal 29 gpm (110 L/min) Engine lubrication pump: Rotor pump w/ deep sump pan, plate cooler and pressurized under-piston nozzles Pump operating angle ratings: Side to side Bucket up Bucket Down Warning alarms: Battery voltage – plus display; Oil service. Indicator light: Engine preheat; Parking brake; Seat bar reminder. OPERATING WEIGHT Unit equipped w/ open cab; 165 lb operator; 78 in Dirt & Foundry bucket; full of fuel: 8,880 lb (4 027 kg) Shipping weight Battery 12-volt low-maintenance 925 cold-cranking amps @ 0° F (-18° C°) OPERATOR ENVIRONMENT ROPS/FOPS Level 1 canopy w/ side screens; Keyed start ignition; Tilt ROPS/FOPS; Rear window w/ emergency escape; Suspension Seat, vinyl w/ 2 in (51 mm) retractable 3 point lap seat belt; Hand and foot throttles; Alarm package – back-up and horn; Rearview mirror; Headliner; Dome Light; Top window; Cup holder; 12V Power plug socket; Foot rest; Seat pocket; Padded seat bar w/ integral armrests; Loader control lockout system; Electric parking brake control; Operator’s compartment floor cleanout; Proportional Add-on weights: Side cab glass Polycarbonate cab door Glass cab door w/ wiper Suspension seat Additional counterweight HYDRAULICS Implement pump type Warning lights with alarms: Engine coolant temperature; Engine oil pressure; Engine malfunction; Hydraulic charge pressure; Hydraulic filter restriction; Hydraulic oil temperature: Critical system stop, Engine system, Hydraulic system, Electrical and diagnostic system. Displacement: Standard aux. High-flow aux. Standard flow @ rated engine RPM: @ 100% efficiency 24.2 gpm (91.5 L/min) Optional high-flow @ rated engine RPM: @ 100% efficiency 32.4 gpm (122.6 L/min) Loader control valve: Type 3 spool/open center/series - series Relief pressure 3,046 psi (210 bar) Port relief pressures: Loader raise Bucket curl Bucket dump Hydraulic lines: Tubing Loop hoses Hydraulic oil cooler: Number of fins 10 per inch (3.94 per cm) Number of tube rows x columns 9x1 Area 136.5 in2 (880 cm2) Hydraulic filter

 Open the catalog to page 1
TR310B-2

SERVICE CAPACITIES HYDRAULICS CONT. PERFORMANCE SPECS Fuel Tank Lift cylinders: Bore diameter Rod diameter Stroke Closed length Bucket cylinders: Bore diameter Rod diameter Stroke Closed length Rated operating capacity – ROC*: 35% of tipping load 2,170 lb (984 kg) 50% of tipping load 3,100 lb (1 406 kg) w/ additional counterweight 3,200 lb (1 451 kg) Hydraulic system: Reservoir Total Tipping load* Breakout forces @ 3,150 psi (217 bar)*: Bucket cylinders 8,680 lb (38.6 kN) Lift cylinders – hydraulic limit 6,440 lb (29.0 kN) Cycle times: Raise Lower Dump Roll back NOTE: *Measured using 78 in (1.98...

 Open the catalog to page 2
TR310B-3

TRACK SELECTION Type 15.75 in (400 mm) Ground Pressure Width to Outside Track OPTIONAL BUCKETS Type Heaped Capacity Dirt & Foundry Light Material Manure & Slurry Heavy-Duty Extended with SmartFit Teeth STANDARD EQUIPMENT OPERATOR ENVIRONMENT 2-speed hydrostatic four wheel drive SAHR disc parking brake Manual attachment coupler Radial lift geometry Loader lift arm support strut SAE operating load: 3,100 lbs Tipping load: 6,200 lbs ENGINE FPT F5H FL463 A*G001 207 CID (3.4 L) Turbo Tier 4 Final Certified Diesel Oxidation Catalyst (DOC) High Pressure Common Rail (HPCR) fuel injection Horsepower:...

 Open the catalog to page 3
TR310B-4

OPTIONAL EQUIPMENT OPERATOR ENVIRONMENT FACTORY SUPPLIED ATTACHMENTS Enclosed cab: Fully sealed and pressurized – FSP Glass door with wiper and washer Sliding side windows – removable Ventilation system with integrated heater Heater and air conditioner AM/FM Bluetooth radio with 2 speakers and USB port Keyless start ignition 8 in Color LCD Display Economy Mode (auto idle shutdown) Auto Engine Protection Shutdown Electro-hydraulic controls: For drive/steering, loader functions Switchable between H and ISO patterns Adjustable sensitivity of controls Mechanical hand controls Hand and foot controls:...

 Open the catalog to page 4

All Case catalogs and technical brochures

  1. CX160D

    6  Pages

  2. CX145D SR

    6  Pages

  3. PT240D

    2  Pages

  4. SV207E

    2  Pages

  5. DV45CE

    2  Pages

  6. DV45E

    2  Pages

  7. DV36E

    2  Pages

  8. DV26CE

    2  Pages

  9. DV26E

    2  Pages

  10. DV23CE

    2  Pages

  11. DV23E

    2  Pages

  12. TR270B

    4  Pages

  13. DL550

    5  Pages

  14. 590SN

    7  Pages

  15. 580SN WT

    7  Pages

  16. 580SN

    7  Pages

  17. 580N

    7  Pages

  18. 580N EP

    7  Pages

  19. Wheel Loaders

    16  Pages

  20. Tractor Loaders

    20  Pages

  21. Motor Graders

    20  Pages

  22. Mini Excavators

    16  Pages

  23. Excavators

    20  Pages

  24. Crawler Dozers

    16  Pages

  25. Backhoe Loaders

    16  Pages

  26. DV26D

    2  Pages

  27. DV23CD

    2  Pages

  28. DV23D

    2  Pages

  29. TV450

    2  Pages

  30. TV370

    4  Pages

  31. 1150M

    3  Pages

  32. 850M

    3  Pages

  33. 750M

    3  Pages

  34. Attachments

    88  Pages

  35. CX210D, CX250D

    28  Pages

  36. CX series

    20  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.