BACKHOE LOADER TIER 4 FINAL CERTIFIED Transmission – standard: PowerDrive H-Type, 4F-4R hydraulic clutch shifting w/ auto shift mode and direct drive Voltage Dual batteries: Transmission – standard: PowerDrive H-Type, 4F-4R hydraulic clutch shifting w/ auto shift mode Travel Speeds – H-Type PowerDrive DD Transmission Forward mph (kph) 1st 4.0 (6.5) 2nd 6.6 (10.6) 3rd w/ DD Feature Off 13.7 (22.0) 3rd w/ DD 14.4 (23.1) 4th w/ DD Feature Off 23.0 (37.0) 4th w/ DD 25.0 (40.2) Torque converter ratio Fuel injection Direct, high pressure common rail – HPCR Emissions Certification Type Engine speeds* Rated speed – full load Low idle High idle – no load Horsepower @ 2200 RPM: Gross Net Maximum torque @ 1400 RPM: Gross 339 lb·ft (460 N·m) Net 338 lb·ft (459 N·m) Torque rise at rated speed Radiator: Core type Core size area Rows of tubes Viscous Fan: Style Diameter Ratio 9 blade viscous suction 19.68 in (500 mm) 1.4:1 Pump operating angle ratings: Side to side Rated 35° Fore and aft Rated 35° Oil filtration Replaceable, full flow cartridge Differential lock: On-the-go push-button activation Front 4WD/Rear axle: Differential ratio Planetary hub ratio Total reduction ratio Service brakes: Individually applied, power assisted, hydraulically actuated, maintenance-free, self-adjusting, outboard mounted, wet disc, 2 per side. Total disc area 384 in2 (0.25 m2) Parking brakes Trans Mounted spring-applied hydraulic release – SAHR NOTE: Travel speeds at 2306 engine RPM specified: w/ 21.0 L x 24.0 tires. 160 amp 850 cold-cranking amps each 12 Volts, negative ground OPERATOR ENVIRONMENT ROPS/FOPS certified protective canopy; Anti-vandalism cover for dash – w/ canopy only; Rear fenders extensions; Coat hook w/ garment strap; Interior rearview convex mirror; Mechanical suspension seat – 180° swivel – Vinyl; 3 in (76 mm) retractable seat belt; Cup holder/ storage tray mounted on left-hand fender; Right-hand storage compartment w/ lid, tilt-steering wheel on cab models. Gauges: Engine water temperature; Converter oil temperature; Fuel level; Tachometer/ hourmeter; DEF level. Warning lights: Air cleaner restriction; Alternator; A/C high pressure; Cold start; Engine oil pressure; Hydraulic oil filter bypass; Parking brake engagement; Low fuel; Water in fuel; Low DEF. Audible alarms w/ diagnostics: Coolant temperature; Engine oil pressure; Parking brake engagement; Converter oil temperature; Shuttle engagement/seat position; Backup alarm; Low DEF. Horn Dual switched front and rear OPERATING WEIGHT Configuration – SAE Transport: No Operator, 4:1 Loader Bucket, E-hoe, Cab w/ Heat and AC, Ride Control, Fully fueled, 24 in HD BH Bucket 4 WD, Boom Guard, 1,100 lb front counterweight, Quick Couple BH, BH aux., Pilot BH Controls, 14-17.5 @ 50 psi front tires, 21 L – 24 @ 28 psi Rear Tires. 21,325 lb (9 673 kg) Add-on weights: Cab-over canopy Fabricated stabilizer pads NOTE: *Engine speeds w/ standard transmission. Meets fed

HYDRAULICS Pump: Bosch Rexroth Series 31 Variable Displacement Axial Piston Pump, dual mode torque regulation, mode selected by solenoid Main relief pressure: Standard Power Lift Filtration: 7-micron, full flow replaceable cartridge on return line, condition indicator light for filter. Oil cooler Loader flow @ rated engine RPM: 43 gpm @ 2,340 psi (162.6 L/min @ 161 bar) Loader control valve w/ pilot or manual backhoe controls: Two or three-spool closed center sectional control valve. Single lever manual control for lift and tilt functions. The three-spool valve uses a proportional Electro-Hydraulic...

Line drawings are for illustrative purpose only and may not be exact representation of unit. LOADER DIMENSIONS A. Overall operating height – fully raised Height to: B. Bucket hinge pin fully raised C. Bucket hinge pin at SAE carry D. Dump angle at full height E. Dump clearance at full height, 45° dump: Bucket Clam open F. Dump reach at full height, 45° dump – from bumper: Bucket Clam open Bucket rollback: G. @ Groundline H. @ SAE carry J. @ Full height K. Digging depth below grade: Bucket flat Clam open – dozing L. Reach from front axle centerline – bucket on ground Lift capacity to full height...

M. Overall transport length: Long Lip bucket 4 IN 1® bucket Overall transport width Height: To top of canopy To top of cab To top of exhaust stack N. Transport Ground clearance at backhoe frame Front wheel tread: 14.0 L x 17.5 Industrial Rib 14.0 L x 17.5 Rear wheel tread: 21.0 L x 24.0 NOTE: Dimensions taken with 21.0 L x 24.0 rear tires and 14.5/75.0 L x 16.1 front tires except that data marked 4WD is taken with 14.0 L x 17.5 front tires. CYLINDERS Loader: Lift – 2 Dump – 2 4 IN 1® clam – 2 Backhoe: Boom Dipperstick Bucket Extendahoe® Swing – 2 Stabilizer – 2 Bore Diameter Closed Length AXLE...

BACKHOE LIFT CAPACITIES Extendahoe® Retracted Standard Boom Lift +18 ft (5.50 m) +16 ft (4.87 m) +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m) +2 ft (0.61 m) Ground Level -2 ft (0.61 m) -4 ft (1.22 m) -6 ft (1.83 m) -8 ft (2.44 m) -10 ft (3.05 m) -12 ft (3.66 m) -14 ft (4.27 m) Dipper Lift +16 ft (4.87 m) +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m) +2 ft (0.61 m) Power Lift Power Lift NOTE: Boom and Dipper Lift Capacities are rated per SAE J31 and are 87% of the maximum hydraulic lift force available...

STANDARD EQUIPMENT OPERATOR ENVIRONMENT Ground level remote hydraulic test ports Variable displacement axial piston pump Pump: 43 gpm @ 3,000 psi (162.6 L/min @ 207 bar) Heavy-duty hydraulic oil cooler 7-micron, spin on oil filter CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription ENGINE FPT F5BFL413A diesel Selective Catalytic Reduction – SCR Aspirated air cleaner – replaceable dual element dry type with radial seal Fuel filter with water trap Radiator with de-aeration bottle Antifreeze to -34° F (-37° C) Electronic throttles – foot and rotary hand Self adjusting...