580SN
7Pages

TIER 4 FINAL CERTIFIED Transmission – standard: 4F-4R Power Shuttle Synchromesh Transmission manual gear shift, fully synchronized Specifications below apply to the Power Shuttle transmission. Gear ratios 1st 2nd 3rd 4th ENGINE Model Emissions Certification Type Cylinders Bore/Stroke Fuel injection Direct, high pressure common rail – HPCR Fuel Engine speeds* Rated speed – full load Low idle High idle – no load Horsepower @ 2200 RPM: Gross Net Maximum torque @ 1400 RPM: Gross 334 lb·ft (453 N·m) Net 333 lb·ft (452 N·m) Torque rise at rated speed Radiator: Core type Core size area Rows of tubes 39° fan: Style Diameter Ratio** Pump operating angle ratings: Side to side Rated 35° Fore and aft Rated 35° Oil filtration Replaceable, full flow cartridge NOTE: *Engine speeds w/ standard transmission. Meets federal emission regulations. **Viscous fan. Travel speeds – Standard Power Shuttle Transmission Forward Reverse mph (kph) mph (kph) 1st 3.8 (6.1) 4.5 (7.3) 2nd 6.0 (9.7) 7.2 (11.6) 3rd 13.1 (21.1) 15.7 (25.3) 4th 24.6 (39.6) 29.5 (47.5) Transmission – optional: PowerDrive H-Type, 4F-4R hydraulic clutch shifting w/ auto shift mode and direct drive Gear ratios Forward/Reverse 1st 5.533/4.549 2nd 3.359/2.762 3rd 1.533/1.260 4th 0.811/— Travel speeds – Optional DD Transmission 1st 2nd 3rd w/ DD Feature Off 3rd w/ DD 4th w/ DD Feature Off 4th w/ DD Torque converter ratio Differential-lock: On-the-go push-button activation Front/Rear axle (w/ 4WD 12x16.5 front tires): Differential ratio 2.0/2.5 Planetary hub ratio 6.0/6.4 Total reduction ratio 12.0/16.0 Service brakes: Individually applied, power assisted, hydraulically actuated, maintenance-free, self-adjusting, outboard mounted, wet disc, 2 per side. Total disc area 384 in2 (0.25 m2) Parking brakes Trans Mounted spring-applied hydraulic release – SAHR NOTE: Travel speeds at 2312 engine RPM specified: w/ 19.5 L x 24.0 tires. 12 Volts, negative ground Alternator Dual batteries: 160 amp 850 cold-cranking amps each OPERATOR ENVIRONMENT ROPS/FOPS certified protective canopy; Anti-vandalism cover for dash – w/ canopy only; Rear fenders extensions; Coat hook w/ garment strap; Interior rearview convex mirror; Mechanical suspension seat – 180° swivel – Vinyl; 3 in (76 mm) retractable seat belt; Cup holder/ storage tray mounted on left-hand fender; Right-hand storage compartment w/ lid, tilt-steering wheel on cab models. Gauges: Engine water temperature; Converter oil temperature; Fuel level; Tachometer/ hourmeter; DEF level. Warning lights: Air cleaner restriction; Alternator; A/C high pressure; Cold start; Engine oil pressure; Hydraulic oil filter bypass; Parking brake engagement; Low fuel; Water in fuel; Low DEF. Audible alarms w/ diagnostics: Coolant temperature; Engine oil pressure; Parking brake engagement; Converter oil temperature; Shuttle engagement/seat position; Backup alarm; Low DEF. Horn Dual switched front and rear OPERATING WEIGHT Configuration 1 – SAE Transport: No Operator, Loader Bucket, Cab, AC, 1,100 lb front counter weight, 2WD, Full of Fuel, SAE Carry T4 Final Engine, Pilot Controls, 11 L – 16 @ 52 psi front tires, 19.5 L – 24 Rear Tires. 17,810 lb (8 078 kg) Configuration 2 – SAE Transport: No Operator, 4:1 Loader Bucket, E-hoe, Cab, 1,100 lb front counter weight, Full of Fuel, SAE Carry T4 Final Engine, Pilot Controls, 12 x 16.5 @ 50 psi front tires, 4WD w/ driveshaft guard, 19.5 L – 24 @ 30 psi rear tires. 19,750 lb (8 958 kg) Add-on weights: Cab-over canopy Fabricated stabilizer pads Extendahoe®

HYDRAULICS Pump: Bosch Rexroth Series 31 Variable Displacement Axial Piston Pump Main relief pressure: Standard Power Lift Filtration: 7-micron, full flow replaceable cartridge on return line, condition indicator light for filter. Oil cooler Loader flow @ rated engine RPM: 41 gpm @ 2,340 psi (156.2 L/min @ 161 bar) Loader control valve w/ pilot or manual backhoe controls: Two or three-spool closed center sectional control valve. Single lever manual control for lift and tilt functions. The three-spool valve uses a proportional Electro-Hydraulic control for the auxiliary function. The lift...

Line drawings are for illustrative purpose only and may not be exact representation of unit. LOADER DIMENSIONS A. Overall operating height – fully raised Height to: B. Bucket hinge pin fully raised C. Bucket hinge pin at SAE carry D. Dump angle at full height E. Dump clearance at full height, 45° dump: Bucket Clam open F. Dump reach at full height, 45° dump – from bumper: Bucket Clam open Bucket rollback: G. @ Groundline H. @ SAE carry J. @ Full height K. Digging depth below grade: Bucket flat Clam open – dozing L. Reach from front axle centerline – bucket on ground Lift capacity to full...

2WD with 17.5 L x 24.0 rear tires M. Overall transport length: Long Lip bucket with Quick Coupler 4 IN 1® bucket with Quick Coupler Long Lip bucket with Straight Links 4 IN 1® bucket with Straight Links Overall transport width Height: To top of canopy To top of cab To top of exhaust stack N. Transport Ground clearance at backhoe frame Angle of departure Front wheel tread: 11.0 L x 16.0 12.0 L x 16.5 12.5/80 x 18.0 19.5 L x 24.0 17.5 L x 24.0 Width over tires: 11.0 L x 16.0 12.0 L x 16.5 12.5/80 x 18.0 19.5 L x 24.0 17.5 L x 24.0 CYLINDERS Loader: Lift – 2 Dump – 2 4 IN 1® clam – 2 Backhoe:...

BACKHOE LIFT CAPACITIES Standard Backhoe Extendahoe® Retracted Standard Boom Lift +16 ft (4.87 m) +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m) +2 ft (0.61 m) Ground Level -2 ft (0.61 m) -4 ft (1.22 m) -6 ft (1.83 m) -8 ft (2.44 m) -10 ft (3.05 m) -12 ft (3.66 m) -14 ft (4.27 m) Dipper Lift +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m) +2 ft (0.61 m) Power Lift Power Lift Power Lift NOTE: Boom and Dipper Lift Capacities are rated per SAE J31 and are 87% of the maximum hydraulic lift force available...