580N
1 /7Pages

580N

580N
1 /7Pages

Catalog excerpts

580N-1

BACKHOE LOADER TIER 4 FINAL CERTIFIED OPERATOR ENVIRONMENT Transmission: 4F-4R Power Shuttle Synchromesh Transmission manual gear shift, fully synchronized ROPS/FOPS certified protective canopy; Anti-vandalism cover for dash – w/ canopy only; Rear fenders extensions; Coat hook w/ garment strap; Interior rearview convex mirror; Mechanical suspension seat – 180° swivel – Vinyl; 3 in (76 mm) retractable seat belt; Cup holder/ storage tray mounted on left-hand fender; Right-hand storage compartment w/ lid, tilt-steering wheel on cab models. ENGINE Model Emissions Certification Type Fuel injection Direct, high pressure common rail – HPCR Engine speeds* Rated speed – full load Low idle High idle – no load Horsepower @ 2200 RPM: Gross Net w/ viscous fan** Net Differential-lock: On-the-go push-button activation Front/Rear axle (w/ 4WD 12x16.5 front tires): Differential ratio 2.0/2.5 Planetary hub ratio 6.0/6.4 Total reduction ratio 12.0/16.0 Service brakes: Individually applied, power assisted, hydraulically actuated, maintenance-free, self-adjusting, outboard mounted, wet disc, 2 per side. Total disc area 384 in2 (0.25 m2) Parking brakes Trans Mounted spring-applied hydraulic release – SAHR NOTE: Travel speeds at 2293 engine RPM specified: w/ 19.5 L x 24.0 tires. Maximum torque @ 1400 RPM: Gross 306 lb·ft (415 N·m) Net w/ viscous fan 305 lb·ft (413 N·m) Net 299 lb·ft (405 N·m) Torque rise at rated speed Radiator: Core type Core size area Rows of tubes 39° fan: Style Diameter Ratio Pump operating angle ratings: Side to side Fore and aft Oil filtration Voltage Dual batteries: Power plugs – 2 12 Volts, negative ground 160 amp 850 cold-cranking amps each 30 amps total Gauges: Engine water temperature; Converter oil temperature; Fuel level; Tachometer/ hourmeter; DEF Level. Warning lights: Air cleaner restriction; Alternator; A/C high pressure; Cold start; Engine oil pressure low; Hydraulic oil filter bypass; Parking brake engagement; Low fuel; Water in fuel; Low DEF. Audible alarms: Coolant temperature; Engine oil pressure; Parking brake engagement; Shuttle engagement/seat position; Backup alarm; Converter temperature; Low DEF. Horn Dual switched front and rear OPERATING WEIGHT Configuration 1 – SAE Transport: Standard dipper, 82 in (2.08 m) LL bucket, 2WD, 19.5 L – 24 rear tires, 24 in HD backhoe bucket, flip over stabilizer pads, 1 Door Cab w/ Heat and A/C, Cloth Mechanical Suspension seat, 1,100 lb front counter weight, no operator, fully fueled. 16,589 lb (7 525 kg) Configuration 2 – SAE Transport: No Operator, 1 Door Cab, 4WD, AC, E-hoe, Wobble Stick Mechanical BH Controls, 1,100 lb Front Counterweight, PowerShuttle Transmission, Boom Guard, Extendahoe®, 82 in GP Loader Bucket 12-16.5 Front Tires, 19.5 L – 24 Rear Tires. 17,751 lb (8 052 kg) Add-on weights: Cab-over canopy Extendahoe® Rated 35° Rated 35° Replaceable, full flow spin on NOTE: *Meets federal emission regulations. **Viscous fan included w

 Open the catalog to page 1
580N-2

HYDRAULICS Pump: Parker P330 Single Section Gear Pump Main relief pressure: Standard Filtration: 7-micron, return line, full flow, spin on element, condition indicator light for filter. Oil cooler Loader flow @ rated engine RPM: 28.5 gpm @ 3,350 psi (108.0 L/min @ 231 bar) Loader control valve: Two or three-spool open center monoblock valve. Two and three-spool valves have a single lever manual control for lift and tilt functions. Three-spool valve uses a proportional Electro-Hydraulic control for the auxiliary function. The lift lever has a positive hold “Float” position and a “return-to-dig”...

 Open the catalog to page 2
580N-3

Line drawings are for illustrative purpose only and may not be exact representation of unit. LOADER DIMENSIONS A. Overall operating height – fully raised Height to: B. Bucket hinge pin fully raised C. Bucket hinge pin at SAE carry D. Dump angle at full height E. Dump clearance at full height, 45° dump: Bucket Clam open F. Dump reach at full height, 45° dump – from bumper: Bucket Clam open Bucket rollback: G. @ Groundline H. @ SAE carry J. @ Full height K. Digging depth below grade: Bucket flat Clam open – dozing L. Reach from front axle centerline – bucket on ground Lift capacity to full height...

 Open the catalog to page 3
580N-4

M. Overall transport length: Long Lip bucket with Quick Coupler 4 IN 1® bucket with Quick Coupler Long Lip bucket with Straight Links 4 IN 1® bucket with Straight Links Overall transport width – rear tires Height: To top of canopy To top of cab To top of exhaust stack N. Transport Ground clearance at backhoe frame Front wheel tread: 11.0 L x 16.0 12.0 L x 16.5 12.5/80 x 18.0 Rear wheel tread: 17.5 L x 24.0 19.5 L x 24.0 Width over tires: 11.0 L x 16.0 12.0 L x 16.5 12.5/80 x 18.0 17.5 L x 24.0 19.5 L x 24.0 CYLINDERS Loader: Lift – 2 Dump – 2 4 IN 1® clam – 2 Backhoe: Boom Dipperstick Bucket...

 Open the catalog to page 4
580N-5

BACKHOE LIFT CAPACITIES Standard Backhoe Boom Lift +16 ft (4.87 m) +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m) +2 ft (0.61 m) Ground Level -2 ft (0.61 m) -4 ft (1.22 m) -6 ft (1.83 m) -8 ft (2.44 m) -10 ft (3.05 m) -12 ft (3.66 m) -14 ft (4.27 m) Dipper Lift +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m) +2 ft (0.61 m) BACKHOE OPERATIONAL DATA Standard Backhoe Digging depth: Maximum 2 ft (610 mm) flat bottom 8 ft (2.44 m) flat bottom Overall reach from: Rear axle centerline Swing pivot Loading height...

 Open the catalog to page 5
580N-6

STANDARD EQUIPMENT OPERATOR ENVIRONMENT Pump: 28.5 gal/min @ 3,350 psi (107.9 L/min @ 231 bar) Heavy-duty hydraulic oil cooler 7-micron, spin on oil filter CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription ENGINE FPT F5BFL413C diesel Cooled EGR Selective Catalytic Reduction – SCR Full flow engine oil filter Aspirated air cleaner – replaceable dual element dry type with radial seal Fuel filter with water trap Radiator with de-aeration bottle Antifreeze to -34° F (-37° C) Throttles, both rotary hand and foot Self adjusting belt High Pressure Common Rail computer...

 Open the catalog to page 6

All Case catalogs and technical brochures

  1. CX160D

    6  Pages

  2. CX145D SR

    6  Pages

  3. PT240D

    2  Pages

  4. SV207E

    2  Pages

  5. DV45CE

    2  Pages

  6. DV45E

    2  Pages

  7. DV36E

    2  Pages

  8. DV26CE

    2  Pages

  9. DV26E

    2  Pages

  10. DV23CE

    2  Pages

  11. DV23E

    2  Pages

  12. TR310B

    4  Pages

  13. TR270B

    4  Pages

  14. DL550

    5  Pages

  15. 590SN

    7  Pages

  16. 580SN WT

    7  Pages

  17. 580SN

    7  Pages

  18. 580N EP

    7  Pages

  19. Wheel Loaders

    16  Pages

  20. Tractor Loaders

    20  Pages

  21. Motor Graders

    20  Pages

  22. Mini Excavators

    16  Pages

  23. Excavators

    20  Pages

  24. Crawler Dozers

    16  Pages

  25. Backhoe Loaders

    16  Pages

  26. DV26D

    2  Pages

  27. DV23CD

    2  Pages

  28. DV23D

    2  Pages

  29. TV450

    2  Pages

  30. TV370

    4  Pages

  31. 1150M

    3  Pages

  32. 850M

    3  Pages

  33. 750M

    3  Pages

  34. Attachments

    88  Pages

  35. CX210D, CX250D

    28  Pages

  36. CX series

    20  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.