580N EP

580N EP

580N EP

Product catalog summary
Engine Specifications:
The FPT F5HFL463D engine is a Tier 4 Final certified diesel engine with a 4-stroke, turbocharged design. It has 4 cylinders, a bore/stroke of 3.90 x 4.33 inches, and a displacement of 207 in³ (3.4 L). It features direct, high-pressure common rail fuel injection and operates on diesel fuel. The engine's rated speeds include a full load speed of 2200 RPM, low idle between 900-1000 RPM, and high idle without load between 2330-2430 RPM. It produces 74 hp at 2200 RPM and a maximum torque of 233 lb·ft at 1400 RPM.
Drivetrain:
The standard transmission is a 4F-4R Power Shuttle Synchromesh with manual gear shift and full synchronization. Gear ratios range from 5.603/4.643 in 1st gear to 0.793/0.657 in 4th gear. The differential lock is activated via a push-button, and the drivetrain includes a torque converter with a ratio of 3.2.
Electrical System:
The system operates at 12 volts with a 120 amp alternator and an 850 cold-cranking amps battery. Optional dual batteries are available.
Operator Environment:
Features include a ROPS/FOPS certified canopy, mechanical suspension seat with 180° swivel, and various gauges and warning lights for engine and system monitoring. Audible alarms are included for critical alerts.
Hydraulics:
The hydraulic system features a Parker P330 Single Section Gear Pump with a main relief pressure of 3,350 psi. The loader flow at rated engine RPM is 28.5 gpm, with a two or three-spool open center monoblock valve for loader control.
Service Capacities:
The fuel tank capacity is 30.0 gallons, and the hydraulic system total capacity is 106 qt. The engine oil capacity with filter is 8.5 qt.
Dimensions and Weights:
The overall transport length varies between 2WD and 4WD configurations, with a height to the top of the canopy at 8 ft 9 in. The operating weight ranges from 15,995 lb to 16,093 lb depending on configuration.
Loader and Backhoe Specifications:
Loader bucket sizes and capacities are specified, with the long lip bucket having a heaped capacity of 1.03 yd³. The backhoe has a maximum digging depth of 18 ft 6 in with the Extendahoe®.
Standard Equipment:
Includes a full flow engine oil filter, aspirated air cleaner, diesel oxidation catalyst, and antifreeze protection to -34°F. The drivetrain includes a 4F-4R Power Shuttle Synchromesh transmission and electric controls for 4WD and differential lock.
Loader Features:
The loader includes a bucket position indicator, lifting lugs, tie downs, and a single lever control with self-leveling and return-to-dig functions. It also has a hand-operated clutch disconnect and a 4-function loader control.
Backhoe Features:
The backhoe is designed with an over-center design and a fabricated “S” boom. It includes Pro Control Swing dampening and cleated dirt stabilizer pads.
Other Features:
Additional features include a forward tilt engine hood, replaceable molded front bumpers, front/rear tie downs, reflective logos, and various lighting options. The equipment also includes a master disconnect switch, remote jump-start terminals, hydrostatic steering, and a backup alarm.
Telematics and Warranty:
Equipped with CASE SiteWatch™ Telematics, including hardware and a 3-year advanced data subscription. The warranty includes a 1-year/unlimited-hour full-coverage base limited warranty and a 2-year/2,000-hour extended engine warranty.
Optional Equipment:
Optional features include a ROPS/FOPS certified protective cab, cold weather starting aids, auxiliary hydraulics, and a tool portfolio of additional attachments. The backhoe offers auxiliary hydraulics, an Extendahoe®, and a pilot-operated control system.
Other Options:
Options include different tire configurations, special paint, an LED working/driving light package, and front fenders.
Important Notes:
Specifications are subject to change without notice, and availability may vary by country. It emphasizes the importance of reading the operator’s manual and inspecting equipment before use.
See more

Catalog excerpts

580N EP-1

TIER 4 FINAL CERTIFIED OPERATOR ENVIRONMENT Transmission – standard: 4F-4R Power Shuttle Synchromesh Transmission manual gear shift, fully synchronized ROPS/FOPS certified protective canopy; Rear fenders extensions; Coat hook w/ garment strap; Interior rearview convex mirror; Mechanical suspension seat – 180° swivel – Vinyl; 3 in (76 mm) retractable seat belt; Cup holder/ storage tray mounted on left-hand fender; Right-hand storage compartment w/ lid, anti-vandalism dash cover, tilt steering wheel on cab models. ENGINE Model Emissions Certification Type Fuel injection Direct, high pressure common rail – HPCR Engine speeds* Rated speed – full load Low idle High idle – no load Horsepower @ 2200 RPM: Gross Net w/ viscous fan** Net Maximum torque @ 1400 RPM: Gross 233 lb·ft (316 N·m) Net w/ viscous fan 228 lb·ft (310 N·m) Net 220 lb·ft (298 N·m) Torque rise at rated speed Radiator: Core type Core size area Rows of tubes 39° fan: Style Diameter Ratio Pump operating angle ratings: Side to side Fore and aft Oil filtration Differential lock: On-the-go push-button activation Front/Rear axle (w/ 4WD 12x16.5 front tires): Differential ratio 2.2/2.75 Planetary hub ratio 6.0/6.4 Total reduction ratio 13.3/17.6 Service brakes: Individually applied, power assisted, hydraulically actuated, maintenance-free, self-adjusting, outboard mounted, wet disc, 2 per side. Total disc area 384 in2 (0.25 m2) Parking brakes Trans Mounted spring-applied hydraulic release – SAHR NOTE: ravel speeds at 2293 engine T RPM specified: w/ 19.5 L x 24.0 tires. Speeds decrease w/ 17.5 L x 24.0 rear tires. ELECTRICAL Voltage Alternator Battery 12 Volts, negative ground 120 amp 850 cold-cranking amps Optional dual batteries: 850 cold-cranking amps each Power plugs – 2 Gauges: Engine water temperature; Converter oil temperature; Fuel level; Tachometer/ hourmeter; Voltmeter. Warning lights: Air cleaner restriction; Alternator; A/C high pressure; Cold start; Engine oil pressure low; Hydraulic oil filter bypass; Parking brake engagement; Low fuel; Water in fuel. Audible alarms: Coolant temperature; Engine oil pressure; Parking brake engagement; Shuttle engagement/seat position; Backup alarm; Converter temperature. Horn Dual switched front and rear OPERATING WEIGHT Configuration 1 – SAE Transport: GP Loader Bucket, 2WD, Canopy, Boom Guard, Full of Fuel, SAE Carry, Tier 4 Final Engine, Extendahoe®, 4 Stick Mech BH, Standard Transmission, 19.5 L – 24 Rear Tires, 900 lb Front Counterweight. 15,995 lb (7 255 kg) Configuration 2 – SAE Transport: GP Loader Bucket, 4WD, 2 Door Cab, AC, Boom Guard, Full of Fuel, SAE Carry, 24 in HD BH Bucket, Tier 4 Final Engine, Pilot Controls, Standard Dipper, Manual Transmission, 19.5 – 24 Rear Tires, 900 lb Front Counterweight, 4WD Driveshaft Guard. 16,093 lb (7 300 kg) Add-on weights: Cab-over canopy Fabricated stabilizer pads Extendahoe® Rated 35° Rated 35° Replaceable, full flow spin on NOTE: *Meets federal emission regulations. **Viscous fan available a

 Open the catalog to page 1
580N EP-2

HYDRAULICS Pump: Parker P330 Single Section Gear Pump Main relief pressure: Standard Filtration: 7-micron, return line, full flow, spin on element. Oil cooler Loader flow @ rated engine RPM: 28.5 gpm @ 3,350 psi (108.0 L/min @ 231 bar) Loader control valve: Two or three-spool open center monoblock valve. Two and three-spool valves have a single lever manual control for lift and tilt functions. Three-spool valve uses a proportional Electro-Hydraulic control for the auxiliary function. The lift lever has a positive hold “Float” position and a “return-to-dig” feature. Loader auxiliary hydraulics...

 Open the catalog to page 2
580N EP-3

Line drawings are for illustrative purpose only and may not be exact representation of unit. LOADER DIMENSIONS A. Overall operating height – fully raised Height to: B. Bucket hinge pin fully raised C. Bucket hinge pin at SAE carry D. Dump angle at full height E. Dump clearance at full height, 45° dump: Bucket Clam open F. Dump reach at full height, 45° dump – from bumper: Bucket Clam open Bucket rollback: G. @ Groundline H. @ SAE carry J. @ Full height K. Digging depth below grade: Bucket flat Clam open – dozing L. Reach from front axle centerline – bucket on ground Lift capacity to full height...

 Open the catalog to page 3
580N EP-4

Overall transport width – rear tires M. Overall transport length: Long Lip bucket with Universal Coupler 4 IN 1® bucket with Universal Coupler Long Lip bucket with Straight Links 4 IN 1® bucket with Straight Links Height: To top of canopy To top of cab To top of exhaust stack N. Transport - standard dipper Ground clearance at backhoe frame Front wheel tread: 11.0 L x 16.0 12.0 L x 16.5 Rear wheel tread: 17.5 L x 24.0 19.5 L x 24.0 Width over tires: 11.0 L x 16.0 12.0 L x 16.5 17.5 L x 24.0 19.5 L x 24.0 CYLINDERS Loader: Lift – 2 Dump – 2 4 IN 1® clam – 2 Backhoe: Boom Dipperstick Bucket Extendahoe®...

 Open the catalog to page 4
580N EP-5

BACKHOE LIFT CAPACITIES Standard Backhoe Extendahoe® Retracted Boom Lift +16 ft (4.87 m) +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m) +2 ft (0.61 m) Ground Level -2 ft (0.61 m) -4 ft (1.22 m) -6 ft (1.83 m) -8 ft (2.44 m) -10 ft (3.05 m) -12 ft (3.66 m) -14 ft (4.27 m) Dipper Lift +14 ft (4.27 m) +12 ft (3.66 m) +10 ft (3.05 m) +8 ft (2.44 m) +6 ft (1.83 m) +4 ft (1.22 m) +2 ft (0.61 m) BACKHOE OPERATIONAL DATA* Standard Backhoe Extendahoe® Extended Digging depth: Maximum 2 ft (610 mm) flat bottom 8 ft (2.44 m) flat bottom Overall reach from: Rear...

 Open the catalog to page 5
580N EP-6

STANDARD EQUIPMENT OPERATOR ENVIRONMENT Pump: 28.5 gal/min @ 3,350 psi (107.9 L/min @ 231 bar) Heavy-duty hydraulic oil cooler 7-micron, spin on oil filter CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription ENGINE FPT F5HFL463D diesel Full flow engine oil filter Aspirated air cleaner – replaceable dual element dry type with radial seal Fuel filter with water trap Diesel Oxidation Catalyst Radiator with de-aeration bottle Antifreeze to -34° F (-37° C) Throttles, both hand rotary and foot Self adjusting belt High Pressure Common Rail DRIVETRAIN Front axle, as selected:...

 Open the catalog to page 6

All Case catalogs and technical brochures

  1. CX160D

    6  Pages

  2. CX145D SR

    6  Pages

  3. PT240D

    2  Pages

  4. SV207E

    2  Pages

  5. DV45CE

    2  Pages

  6. DV45E

    2  Pages

  7. DV36E

    2  Pages

  8. DV26CE

    2  Pages

  9. DV26E

    2  Pages

  10. DV23CE

    2  Pages

  11. DV23E

    2  Pages

  12. TR310B

    4  Pages

  13. TR270B

    4  Pages

  14. DL550

    5  Pages

  15. 590SN

    7  Pages

  16. 580SN WT

    7  Pages

  17. 580SN

    7  Pages

  18. 580N

    7  Pages

  19. Wheel Loaders

    16  Pages

  20. Tractor Loaders

    20  Pages

  21. Motor Graders

    20  Pages

  22. Mini Excavators

    16  Pages

  23. Excavators

    20  Pages

  24. Crawler Dozers

    16  Pages

  25. Backhoe Loaders

    16  Pages

  26. DV26D

    2  Pages

  27. DV23CD

    2  Pages

  28. DV23D

    2  Pages

  29. TV450

    2  Pages

  30. TV370

    4  Pages

  31. 1150M

    3  Pages

  32. 850M

    3  Pages

  33. 750M

    3  Pages

  34. Attachments

    88  Pages

  35. CX210D, CX250D

    28  Pages

  36. CX series

    20  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.