K-SERIES TYRE HANDLER Designed with great visibility, and superior durability. Change Oversized Tyres On-Site, Efficiently and Safely APPLICATIONS Designed for the mining and earth moving industries and may be used in any application requiring the need to handle earth moving tyres. The Cascade Tyre Handler allows you to safely handle OTR tyres weighing up to 15.6 metric tons. The ability to rotate, tip and sideshift the tyre provides the flexibility needed to align the tyre to the truck and complete the tyre change without the lift truck driver leaving the cab of the lift truck. Smaller capacities available Special rotation ranges Non-Rotating models available for logistics operations Multipurpose models available for handling other bulk freight Special opening ranges available Quick release pad options available for handling steel rims and protection chains Mountings for Loaders, Lift Truck Carriages, Telehandlers and Cranes available Joystick control system to operate all attachment functions (requires only two hydraulic hoses over the mast) Superior visibility through and over the frame for aligning the tyre and rim to the vehicle Rugged steel frame and rigid arm design for increased overall durability and capacity Heavy duty Cascade cylinder drive rotation system Forward tipping pad design to safely set the tyre down at Lifting capacities of up to 15.6 metric tons Ability to handle tyres ranging from 1.6m -4.1m in diameter and up to 1.885m wide All hoses are internally located to prevent damage The thinnest prole arms in the industry for those hard to access tyres Unitized control valve with individual test points for fast fault diagnosis

K-SERIES TYRE HANDLER Narrow base Wide base Tyre size Range Min Max Tyre size Range Min Max Mounting Capacity (kg) ET (Lost Load - mm) HCG (mm) VCG (mm) Mass (kg) Body Rotation Pad Rotation Opt Pad Rotation Oil Flow (Min lpm) Oil Flow (Rec lpm) Oil Flow (Max lpm) Rec Oil Pressure Contact Cascade for pricing. Recommended models for tyre size assume tyre & rims weights are combined. Contact Cascade for advice if on vehicle maintenance (OVM) is used. Opening (Min) Opening (Max) A Frame Width C Overall Width D Arm Length H Pad Height W Pad Width T Pad Thickness Specications Opening Range

K-SERIES TYRE HANDLER Mounting Capacity (kg) ET (Lost Load - mm) HCG (mm) VCG (mm) Mass (kg) Body Rotation Pad Rotation Opt Pad Rotation Oil Flow (Min lpm) Oil Flow (Rec lpm) Oil Flow (Max lpm) Rec Oil Pressure Contact Cascade for pricing. Wide base Tyre size Range Min Max Tyre size Range Min Max Opening (Min) Opening (Max) A Frame Width C Overall Width D Arm Length H Pad Height W Pad Width T Pad Thickness Specications Opening Range Narrow base Recommended models for tyre size assume tyre & rims weights are combined. Contact Cascade for advice if on vehicle maintenance (OVM) is used.

K-SERIES TYRE HANDLER Cascade is a registered trademark of Cascade Corporation. " " O Cascade Corporation 2011. All rights reserved. WWW cascorp com F°rm 6822930-GB XM x 10/11