Cascade’s TURNALOAD™ handles a wide For Load Inverting, Rotating and Pallet-to-Pallet Transfers variety of load inverting and rotating tasks. Cascade’s TURNALOAD™ allows for bale spinning and kning between loads of scrap bales. It also transfers loads rapidly from captive “in-house” pallets to less expensive shipping pallets, or to customer pallets. The TURNALOAD™ can be used to invert products susceptible to sedimentation as well as dumping bins and tote boxes. Substantially increases productivity by reducing or eliminating the manual labor involved with load inversion. Side stabilizer for inverting loads that are not bound together. 180˚ rotation stop group used when the load is repeatedly rotated in the same 180˚ cycle and a permanent rotation stop point is desired. Flow dividers continually adjust hydraulic ow to equalize arm speed. Special extended opening and narrow closing ranges. Designed to t both old and new generation fork lift trucks. Proled arms provide maximum visibility through and around the frame without sacricing strength. Steel frame sections, extruded alloy steel arm bars, cast arm bases guarantee outstanding durability and reliability. Built in hydraulic ow dividers and bi-directional relief valve guarantee fast and uniform arm movement. All hydraulic functions are pressure protected. Available for both High and Low pressure truck systems. Bolt-on pallet fork arms and lower frame wear strips.

© 44G: Mounting Class 3A available - Consult Cascade for specifications. ► G-Series: Lift trucks with auxiliary pressures between 155 and 189 bar max. require low pressure attachments. Lift trucks with auxiliary pressures between 190 and 250 bar max. require high pressure attachments. ► Turnaload™ clamps are built to order. When ordering please specify: • "Transfer To" and "Transfer From," pallet size, material • Material to be handled and how to be packaged. • Load weight and size (H x W x L). • Bottom arm shut off standard. Top arm shut off or both arms moveable available. ► Side Stabilizer...