*mydirectindustry

Catalogs
CASAPPA
Truck Pumps - [TMKP-01-T-A]

Truck Pumps - [TMKP-01-T-A]

Product catalog summary

Features:
KAPPA 30 and KAPPA 35 hydraulic gear pumps are designed for truck applications with a high-strength body. They feature reversible rotation with external and internal drain, multiple port positions, long service life under heavy-duty conditions, and optimized weight.

Specifications:
Displacements range from 1.34 in³/rev (21.99 cm³/rev) to 6.10 in³/rev (100.08 cm³/rev). The pumps have an SAE B mounting flange for direct mounting on truck PTOs. The drive shaft is SAE “B” Spline 7/8” with 13 teeth. The inlet pressure range is 10 - 22 psi (0.7 - 1.5 bar abs.), and the fluid temperature range is -13 to 176 °F (-25 to 80 °C) continuous, with a peak of 212 °F (100 °C).

Filtration:
Recommended filtration is based on working pressure, with contamination classes specified according to NAS 1638 and ISO 4406:1999 standards. Casappa recommends using its own production filters.

Direction of Rotation and Port Position:
The pumps are available with reversible rotation and internal/external drain, featuring four ports with two rear ports plugged. All port combinations are possible by switching plugs.

General Data:
Various models are available with different displacements, flow rates, and pressure ratings. Maximum speed is generally 3000 RPM, with minimum speed at 300 or 350 RPM depending on the model.

Pressure Definition:
Rated pressure (p2) and peak pressure (p3) must be maintained within specified limits for proper operation. If p3 exceeds its limit, the relief setting p2 should be decreased.

Port Type and Size:
Ports are available in NPT and SAE straight thread types, with specific nominal sizes and tightening torques provided for different models.

Ordering Information:
Detailed model codes are provided for ordering, with options for different port types and configurations.

Note:
Specifications are subject to change without notice as part of continuous product improvement.

Catalog excerpts

TRUCK PUMPS CASAPPA CORP. 1390 Pierson Drive BATAVIA, IL 60510 www.casappa.com Please contact your local Casappa Dealer for ordering information HYDRAULIC GEAR PUMPS

Open the catalog to page 1

'A CASAPPA FLUID POWER DESIGN FEATURES Truck Pumps KAPPA 30 and KAPPA 35 hydraulic gear pumps with high strength body for truck applications. SAE B mounting flange allows the pumps to be mounted directly on the truck PTO’s. • Reversible rotation with external and internal drain • Multiple port positions • Long service life in heavy duty conditions • Optimized weight • Ideal for truck applications Construction Direction of rotation (looking at the drive shaft) Drive shaft Mounting flange Inlet pressure range for pumps Seal type Fluid temperature range Viscosity range Recommended filtration External...

Open the catalog to page 3

Truck Pumps DIRECTION OF ROTATION AND PORT POSITION Reversible rotation (internal and external drain) The direction of rotation is determined looking at the drive shaft. Reversible pumps with internal and external drain are available with four ports. They are supplied with the two rear ports plugged. All port combinations are allowed just switching one or both plugs. The drawing below shows the inlet and outlet tubing position according to the direction of rotation. Clockwise rotation Pump type V Plug tightening torque Nm (lbf in)

Open the catalog to page 4

'A CASAPPA FLUID POWER DESIGN GENERAL DATA Truck Pumps PRESSURE DEFINITION p2 Rated pressure (relief valve setting) p3 Peak pressure (relief valve max. peak pressure) To ensure proper operation, both p2 and p3 pressures must be kept within the limits stated on page 6. If p2 is compliant, but p3 exceeds its limit, please decrease the relief setting p2 in order to keep the peak pressure p3 within the limit. Displacement Pump type Max. pressure Max. speed Min. speed p2 Rated pressure p3 Peak pressure For different working conditions please consult our sales department.

Open the catalog to page 5

Truck Pumps 3 CASAPPA FLUID POWER DESIGN KAPPA 30 SINGLE UNITS - SAE STANDARD CSC Pump type

Open the catalog to page 6

Port type: see availability on page 6 Pump type C_D mm (inch) mm (inch)

Open the catalog to page 7

Truck Pumps 3 CASAPPA FLUID POWER DESIGN PORT TYPE NPTF _Nominal size Pump type KP30 1/4”

Open the catalog to page 8

Tightening torque for low pressure side port Tightening torque for high pressure side port [values obtained at 5075 psi (350 bar)] For reversible rotation, please consult only the tightening torque for high pressure side port NATIONAL PIPE TAPERED THREAD PORTS (1:16 L/D)) NPT American standard taper pipe thread (60°) conforms to ANSI - ASME B1.20.1 Truck Pumps CODE Nominal size (inch) (lbf in) (lbf in) SAE STRAIGHT THREAD PORTS J514 (O-Ring Boss) American straight thread UNC-UNF 60° conforms to ANSI B 1.1 Nominal size (inch) (lbf in) (lbf in) (♦) = Drain port - (•) = For...

Open the catalog to page 9

FLUID POWER DESIGN Truck Pumps HOW TO ORDER PN Pump type

Open the catalog to page 10

Our policy is one of continuous improvement in product. Specification of items may, therefore, be changed without notice.

Open the catalog to page 11

TRUCK PUMPS CASAPPA CORP. 1390 Pierson Drive BATAVIA, IL 60510 www.casappa.com Please contact your local Casappa Dealer for ordering information HYDRAULIC GEAR PUMPS

Open the catalog to page 12

All CASAPPA catalogs and technical brochures

Archived catalogs

PLATA [SVP 02 T A]
8 Pages
Products Presentation
36 Pages