*mydirectindustry

Catalogs
CASAPPA
STRADA [BAP 01 T A]

STRADA [BAP 01 T A]

1 / 4 PagesView full catalog

STRADA [BAP 01 T A]

Product catalog summary

Specifications:

Fill with oil before start-up.
Direction of rotation: Clockwise or anti-clockwise (by turning the end cover 180°).
Inlet pressure range: 25 in Hg (0.85 bar abs.) to 29 psi (2 bar abs.).
Operating temperature: 176 °F (80 °C).
Fluid: Mineral oil-based hydraulic fluids to DIN 51524.
Viscosity range: Recommended from 58 SSU (10 cSt) to 1819 SUS (400 cSt); 4546 SSU (1000 cSt) tolerated for cold starting.
Filtering requirement: Cleanliness grade 8 according to class NAS 1638.

Pump Types and Specifications:

Pump types: BAP32 and BAP37 series.
Displacement range: From 2.49 in³/rev (40.9 cm³/rev) to 6.71 in³/rev (110 cm³/rev).
Max. continuous pressure: 5075 psi (350 bar).
Max. peak pressure: 5800 psi (400 bar).
Max. speed at inlet pressure 14.5 psi (1 bar abs.): Varies by model, up to 2950 min^-1 without load.
Mass: Ranges from 22.05 lbs (10 kg) to 37.49 lbs (17 kg) depending on model.

Design Features:

Low noise level.
Direct mounting on PTOs.
Compact design with high speed and efficiency.
Standard ISO with Viton shaft seal.

Ordering Information:

Rotation options: S=anti-clockwise, D=clockwise.
To change pump rotation, turn the end cover 180°.

Connector Types:

Brass elbow 45° and 90° connectors, supplied with O-Ring and hose clamp.
Steel straight port connectors available.

Contact Information:

CASAPPA S.p.A. - Parma, Italy.
CASAPPA Corp. - Batavia, IL, USA.
CASAPPA GmbH - Plüderhausen, Germany.
CASAPPA SARL - La Rochelle, France.

Catalog excerpts

Fixed displacement bent axis piston pumps Replaces: STN 01 T A Edition: 01/04.2007 Modification from former edition APPLICATION High pressure SECTOR Mobil hydraulic • Direct mounting on the PTOs • • Compact design • High speed High volumetric, mechanical and overall efficiency Clockwise or anti-clockwise rotation turning the end cover 180° Standard ISO with Viton shaft seal Pump type Fill with oil before start-up Direction of rotation (looking on drive shaft) Inlet pressure range Operating temperature Fluid Viscosity range Filtering requirement Clockwise or anti-clockwise rotation 25 in Hg (0.85 bar abs.) ^ 29 psi (2 bar abs.) 176 °F (80 °C) Mineral oil based hydraulic fluids to DIN 51524 From 58 SSU (10 cSt) to 1819 SUS (400 cSt) recommended 4546 SSU (1000 cSt) tolerated for cold starting Cleanliness grade 8 according to class NAS 1638 ^ CASAPPA FLUID POWER DESIGN

Open the catalog to page 1

HYDRAULIC PISTON PUMPS ISO STANDARD 16 Z0 To change pump rotation turn the end cover 180° Anti-clockwise rotation _______________ Pump type O 01/04.2007 Replaces: STN 01 T A Rotation: S=anti-clockwise - D=clockwise How to order BAP 32.40 S0 -16 Z0 - P GF/GE - N TN 2 001 DCAT049-002

Open the catalog to page 2

HYDRAULIC PISTON PUMPS ITALIAN STANDARD 19 T1 To change pump rotation turn the end cover 180° O 01/04.2007 Replaces: STN 01 T A Anti-clockwise rotation _________________ Pump type Rotation: S=anti-clockwise - D=clockwise How to order BAP 32.40 S0 -19 T1 - P GF/GE - N TN DCAT049-002 001 3

Open the catalog to page 3

53 CASAPPAGAS BSPP THREADED PORT CONNECTORSInlet FG4 Brass elbow 90°. They are supplied complete with O-Ring and hose clamp. Brass elbow 45°. They are supplied complete with O-Ring and hose clamp. [•] Tightening torque tolerance to be applied to the values shown in the table: +10 % 'A CASAPPA FLUID POWER DESIGN CASAPPA S.p.A. - Parma - Italy - Tel.: + 39 0521 304111 - Fax: + 39 0521 804600 CASAPPA Corp. - Batavia, IL 60510 U.S.A. - Phone: 630 761-0041 - Fax: 630 761-0048 CASAPPA GmbH - Pluderhausen - Germany - Tel.: + 49 (0)7181 989830 - Fax: + 49 (0)7181 989831 CASAPPA SARL - La Rochelle - France...

Open the catalog to page 4

All CASAPPA catalogs and technical brochures

Archived catalogs

PLATA [SVP 02 T A]
8 Pages
Products Presentation
36 Pages