Headquarters: CASAPPA S.p.A. Via Balestrieri, 1 43044 Lemignano di Collecchio Parma (Italy) Tel. (+39) 0521 30 41 11 Fax (+39) 0521 80 46 00 IP Videoconferencing E-mail: [email protected] www.casappa.com HYDRAULIC PUMPS, MOTORS & FILTERS

Our passion for high performance in hydraulic drives us. Constant evolution and a passion for hydraulics; this has been Casappa’s strategy, a privately owned company that has been working for more than sixty years in the field of fluid power transmission. We design and build the main components for the hydraulic system. We listen to and work with our customers, from developing a new idea to after-sales service, anywhere around the globe. As a tight-knit group of highly motivated and professionally qualified people, we are always ready to meet new challenges head on. Thanks to the use of the most...

Some of the major companies that rely on our specialised expertise and choose us as an important supplier of hydraulic components for a wide range of applications include: AGCO CNH HYUNDAI LIEBHERR SAME DEUTZ FAHR VOLVO CE AMMAN APOLLO DAIMLER HYVA GROUP LINDE SANDVIK XCMG ARGO TRACTORS (LANDINI) DOOSAN JCB LIUGONG SANY YANMAR ASTRA Veicoli Industriali FARID JLG MAN TRUCK & BUS SCANIA ZAPAGROMASCH ATLAS COPCO FOTON LOVOL JOHN DEERE MANITOU GROUP SOOSAN ZOOMLION BOBCAT HAMM KION GROUP MAZ TEREX BROKK HUNAN...

FLUID POWER DESIGN

FLUID POWER DESIGN Aluminium body gear pumps and motors Cast iron body gear pumps and motors Aluminium body gear flow dividers Cast iron body gear flow dividers Variable displacement axial piston pumps

FLUID POWER DESIGN A complete range of high quality pumps and motors, the end result of listening carefully to what customers need and of working closely with suppliers.

FLUID POWER DESIGN Casappa offers nothing but the best value to its customers thanks to the skills and expertise of its workforce, investments in research and new technologies, cooperation with leading universities and electronics-hydraulics integration. Casappa offers a wide choice of gear or piston pumps and motors for open-circuit applications. Many functions, such as valves and controls, are built directly into the products to optimise system space and costs.

POLARIS series Gear pumps and motors built in three pieces with an extruded body in high resistance aluminium alloy. The wide choice of shafts, flanges and ports, in compliance with all international standards (SAE, DIN and EUROPEAN) allow for their use in an infinite variety of applications. Displacements from 1,07 cm3/rev (0.07 in3/rev) to 91,10 cm3/rev (5.56 in3/rev) available in groups 10, 20 and 30. Max. peak pressure up to 300 bar (4350 psi). Max. speed up to 4000 min-1. Features • High efficiencies • Integrated outboard bearings for heavy duty applications • Multiple units available in...

WHISPER series: low noise emission - reduced pulsations by 75% Gear pumps built in three pieces with an extruded body in high resistance aluminium alloy. WHISPER is a new and original technology protected by international patents and applied to a family of external gear pumps that feature low noise emissions. The wide choice of shafts, flanges and ports, in compliance with all international standards (SAE, DIN and EUROPEAN) allow for their use in an infinite variety of applications. Displacements from 1,12 cm3/rev (0.07 in3/rev) to 34,98 cm3/rev (2.13 in3/rev) available in groups 10 and 20. Max....

Gear pumps and motors built in three pieces with cast iron body. The new gear pumps and motors “PH” series is an evolution of the “POLARIS” series. “POLARIS PH” has a new body made of cast iron to have higher operating parameters and keep the full POLARIS versatility regarding shafts, flanges, ports and built-in valves. This project is targeted for forklifts, skid steer loaders and all those applications where traditional aluminum pumps are being pushed close to their limits. The possibility to mate the body with the cast iron covers further reduces noise levels, in addition to increasing strength. Displacements...

KAPPA series Gear pumps and motors made of cast iron in two pieces. KAPPA is available with mounting flanges and side or rear ports according to SAE and European standard. The rigidity of assembly ensure reliability and high volumetric efficiency also at high operating pressures. Displacements from 4,95 cm3/rev (0.30 in3/rev) to 33,03 cm3/rev (2.01 in3/rev) available in group 20. Max. peak pressure up to 330 bar (4800 psi). Max. speed up to 4000 min-1. Main characteristics NOTES K. : KP = pump / KM = motor Features • High operating pressures • High efficiency at high temperature • Low noise emission Optional...

KAPPA COMPACT series Gear pumps and motors made of cast iron in two pieces. A rigid and compact structure that makes it possible to incorporate a number of functions in a limited space. The reduced dimensions as well as a large variety of drive shafts, mounting flanges and ports ensure great flexibility in the “Compact” line. Wide range of displacements: from 19,00 cm3/rev (1.16 in3/rev) to 150,79 cm3/rev (9.20 in3/rev) available in groups 25, 30, 35 and 40. Max. peak pressure up to 325 bar (4700 psi). Max. speed up to 3500 min-1. Features • High operating pressures • Low noise emission • Exceptional...

Cast iron body gear pumps ^ CASAPPA FLUID POWER DESIGN KAPPA 40 Plus series Large cast iron hydraulic gear pumps for heavy duty applications. Displacements from 61,43 cm3/rev (3.75 in3/rev) to 180,73 cm3/rev (11.02 in3/rev) available in group 40. Max. peak pressure up to 300 bar (4350 psi). Max. speed up to 2800 min-1. Features • New design • Nodular cast iron • High performance • High strength

Gear pumps made of cast iron in two pieces, ideal for truck application. Displacements from 8,26 cm3/rev (0.50 in3/rev) to 150,79 cm3/rev (9.20 in3/rev) available in groups 20, 30, 35 and 40. Max. peak pressure up to 325 bar (4700 psi). Max. speed up to 3000 min-1. Main characteristics Features • High performance also at very low speed • Different ports position availability • Low noise emission • Shaft seal system no leakage guarantee • Modular design • Direct mounting on the PTOs (♦) Values refer to unidirectional pumps. For reversible rotation please see the respective technical catalogue.