1. Catalogs
  2. CASAPPA
  3. PLATA [LF 01 T E]
video corpo

PLATA [LF 01 T E]

PLATA [LF 01 T E]

PLATA [LF 01 T E]

Product catalog summary
Overview: The document provides technical specifications and features of Casappa's fixed displacement axial piston pumps and motors, designed for hedge and grasscutter mowers. It highlights performance, flexibility, and integration capabilities.
Specifications:
  • Power output up to 63 kW (85 Hp) at maximum speed.
  • Reversible rotation with integral anti-shock valves.
  • European and SAE standard mounting flanges.
  • Compact size with side or rear inlet options.
Design Features:
  • Fixed displacement axial piston pump and motor with swash plate design for open circuit.
  • Three-position electrically controlled valve with relief valve.
  • Electronic control of rotor start-up and stop ramps.
  • Auxiliary gear pump available in cast-iron or aluminum body.
Technical Data - Pump:
  • Displacement range: 27 to 48.2 cm3/rev.
  • Maximum inlet pressure: 0.7 to 3 bar.
  • Maximum outlet pressure: 280 to 350 bar.
  • Maximum speed: 2600 to 3100 min-1.
  • Operating temperature: -25 to +90°C with Buna seals.
Technical Data - Motor:
  • Displacement range: 22 to 30.2 cm3/rev.
  • Maximum inlet pressure: 280 to 350 bar.
  • Maximum speed: 4500 to 4900 min-1.
  • Operating temperature: -25 to +90°C with Buna seals.
Filtration and Efficiency:
  • Recommended filtration systems to maintain hydraulic fluid contamination within ISO 4406 standards.
  • Optimal fluid viscosity range: 15 to 35 mm2/s.
Additional Components:
  • Electronic control components for integral pump valve.
  • Software for programming the control board.
Contact Information: Casappa S.p.A. and its subsidiaries provide contact details for further inquiries and orders.
See more

Catalog excerpts

PLATA [LF 01 T E]-1

Targeted engineering design Hedge and Grasscutter mowers

 Open the catalog to page 1
PLATA [LF 01 T E]-2

One of Casappa's aims is to produce targeted engineering solutions to improve machine performance. The new fixed displacement axial piston pump and motor has a higher output than gear pumps and motors. The standardized connecting flanges comply with SAE and European regu I ations and permit use for diverse applications. The design itself is extremely compact whi I e integrating a number of functions, with an electrically control I ed valve on the pump and anti-shock valves on the motor. The compact motor size means it can be directly coupled to the bush-cutter's rotor. This open circuit so I...

 Open the catalog to page 2
PLATA [LF 01 T E]-3

Technical data (with HL or HLP mineral oil based hydraulic fluid to DIN 51524) External load position (*) Availability cont. = continuous int. = intermittent Fax = ax i al force Frad = radial force (1) = with an in i et pressure of 1 bar abs. For different worki ng conditions, please consult our sales department. FLUID VISCOSITY The fluid viscos ity range for optimal use of PLATA pumps and motors is between 15 and 35 mm2/s (cSt). Limit functional conditions are: 1500 mm2/s at start up at -25 °C 10 mm2/s at maximum temperature of 90 °C. FILTERS For a maximum pump life, we recommend the use of...

 Open the catalog to page 3
PLATA [LF 01 T E]-4

Technical data (with HL or HLP mineral oil based hydraulic fluid to DIN 51524) (*) Availability cont. = continuous int. = intermittent Fax = axial force External load position Frad = radial force For different worki ng conditions, please consult our sales department. DESIGN CALCULATION FOR MOTOR [l/min] [Nm] [kW]

 Open the catalog to page 4
PLATA [LF 01 T E]-5

G 3/4 Outlet piston pump 50 Nm [443 Ibf in] G 1/2 Outlet gear pump 50 Nm [443 Ibf in] To place your order contact our sa I es service dept.

 Open the catalog to page 5
PLATA [LF 01 T E]-6

Fixed displacement axial piston motor swash plate design Rear port version (P). Side port version (L). It is not possible to have both side and rear inlets on the same motor. To place your order contact our sales service dept.

 Open the catalog to page 6
PLATA [LF 01 T E]-7

Software for programming the board

 Open the catalog to page 7
PLATA [LF 01 T E]-8

A CASAPPA FLUID POWER DESIGN CASAPPA S.p.A. - Parma - Italy - Tel.: + 39 0521 304111 - Fax: + 39 0521 804600 CASAPPA Corp. - Batavia, IL 60510 U.S.A. - Phone: 630 761-0041 - Fax: 630 761-0048 CASAPPA GmbH - Pluderhausen - Germany - Tel.: + 49(0) 7181- 989830 - Fax + 49(0) 07181- 989831 CASAPPA SARL - Janneyrias - France - Tel.: + 33 4 72462112 - Fax: + 33 4 72462100 www.casappa.com e-mail: [email protected]

 Open the catalog to page 8

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.