MSDS_PF_65
4Pages

{{requestButtons}}

Catalog excerpts

MSDS_PF_65 - 1

S.p.A. Safety data Sheet Product : Compressed fibres sheets - PLANIFLEX PF 65 1. INDICATIONS ON THE PRODUCT Planiflex PF65 is composed mineral fibers mixed and bounded with nitrile rubber and other ingredients; wire reinforced. CAS-No. Unassigned Company CARRARA via provinciale 1E 25030 Adro- BS - Italy Telephone Nr. (+39) 030 7451121 telefax (+39) 030 7451130 2. INFORMATION ON THE INGREDIENTS The product contains the following hazardous materials: Chemical name CAS-No Content % Baymond 9003-18-3 Max. 15 % RS 440 unassigned Max. 35 % Kaoline unassigned Max. 40 % Heavy spar 13462-86-7 Max. 25 % S – phrase : S 36/37 – wear suitable protective clothes and gloves The product is Asbestos Free. 3. HAZARDS IDENTIFICATION • The above mentioned agents (item 2) are used in the production; jointing sheets also contains mineral fibres. All the raw material used for the production of this particular type of product are bounded with special agents averting the release of loose elements into the atmosphere. 4. FIRST AID MEASURES • Inhalation The release of loose elements into the atmosphere is averted. If it comes to the release of free elements while cutting the sheets after all move the person into the fresh air. • Skin It does not come to skin irritation while current usage of the product. • Eyes If irritation occurs, do not rub the eyes. Flush eyes with water. • Ingestion Ingestion is unrealistic 5. FIRE-FIGHTING MEASURES The product are non-combustibile and do not pose fire hazard. However, packaging material may burn. • Suitable extinguishing media Water, foam, carbon dioxide or powder • Extinguishing media wich must not be used for safety reasons Not know • Combustion products Carbon dioxide, cabon monoxide, nitrogen oxides and trace gases • Special protective equipment for fire-fighters Indipendent respiratory protection to prevent fume/gas inhalation in poolrly ventilated areas Rev. 01

Open the catalog to page 1
MSDS_PF_65 - 2

S.p.A. Safety data Sheet Product : Compressed fibres sheets - PLANIFLEX PF 65 ACCIDENTAL RELEASE MEASURES • Personal precautions: No special precaution are required • Environment Precautions No special precaution are required 7. HANDLING AND STORAGE • Handling 1. Unpack material at application site ro avoid unnecessary handling of product 2. Keep work areas clean. Scrap material and debris dispose in suitable containers 3. It’s recommended to spray with water before sweeping or use vacuum cleaner 4. Ensure good ventilation • Storage 1. Before use keep material in original packaging 2. Store...

Open the catalog to page 2
MSDS_PF_65 - 3

S.p.A. Safety data Sheet Product : Compressed fibres sheets - PLANIFLEX PF 65 STABILITY AND REACTIVITY • Stability The product is resistant to chemicals and heat • Condition to avoid Depends on applications and parameters. (Pressure, Temperature, medium…) • Hazardous decomposition products Small quantities of carbon monoxide or also trace of nitrogen oxide TOXICOLOGICAL INFORMATION 1. Acute oral toxicity: (LD50) No hazard is probable 2. Human experiences Airbone coarse fibre dust can cause a transitory, mild irritation of the skin, the mucosa and/or the eyes. Irritation usually abate within...

Open the catalog to page 3
MSDS_PF_65 - 4

S.p.A. Safety data Sheet Product : Compressed fibres sheets - PLANIFLEX PF 65 OTHER INFORMATION 1. Health aspects Safety in use of mineral and Synthetic Fibres, Occupational Safety and Health Series, international Labour Office (ILO). 2. Good working practice Local regulations may be apply 3. Declaration This material Safety Sheet contains the information which are necessary for ensuring the safety of work, health and environment protection. The information given herein is the best available on the date of its issue and comply with the local legal regulations. However, it does not...

Open the catalog to page 4

All Carrara Global Sealing Solution catalogs and technical brochures

  1. MSDS_N1304

    4 Pages

  2. PGT4 GR8622

    1 Pages

  3. N 1304

    1 Pages

  4. SETTING FLANGE

    36 Pages

  5. Setting Flange

    36 Pages

  6. Setting Valve

    36 Pages