TROLLEY FOR BEAMS
13Pages

A wide range of cable carrying trolleys for IPE-NP beams that are particularly suitable for distributing electrical, pneumatic and other energies to mobile equipment as cranes, overhead traveling cranes, galvanic plants, etc. Various trolley sets can be chosen, according to the required capacity: - Steel trolleys for capacities up to 40 kg - Steel trolleys for capacities up to 60 kg - Steel trolleys for capacities up to 150 kg We will assure you quality and safety as all our products have been labelled with “CE” mark, to guarantee that our products meet the 2006/42/EC Machinery Directive...

TROLLEYS FOR BEAMS SIMPLE HEAD - SERIE 4 Galvanized steel from 80 to 140 Material Beams IPE-NP WEIGHT HEAD WITH SADDLE - SERIE 4 Galvanized steel from 80 to 140 30 kg Material Beams IPE-NP Capacity SADDLE CABLE CARRYING TROLLEY- SERIE 4 Galvanized steel from 80 to 140 Material Beams IPE-NP Nylon wheels Capacity Nylon wheels with bearing Capacity Steel wheels with bearing Capacity

TRAILER - SERIE 4 Galvanized steel from 80 to 140 Material Beams IPE-NP Ø 40 mm 15 kg Nylon wheels Capacity Nylon wheels with bearing Capacity Steel wheels with bearing Capacity SPECIAL TRAILER - SERIE 4 Galvanized steel from 80 to 140 Material Beams IPE-NP Nylon wheels Capacity Nylon wheels with bearing Capacity Steel wheels with bearing Capacity

TROLLEYS FOR BEAMS SIMPLE HEAD - SERIE 6 Galvanized steel from 80 to 140 Material Beams IPE-NP WEIGHT HEAD WITH SADDLE - SERIE 6 Galvanized steel from 80 to 140 50 kg Material Beams IPE-NP Capacity 210 CABLE CARRYING TROLLEY - SERIE 6 Galvanized steel from 80 to 140 Material Beams IPE-NP Wheels Steel with bearing

Galvanized steel from 80 to 140 Material Beams IPE-NP Wheels Steel with bearing Capacity WEIGHT SPECIAL TRAILER - SERIE 6 Galvanized steel from 80 to 140 Material Beams IPE-NP Wheels Steel with bearing

TROLLEYS FOR BEAMS HEAD WITH SADDLE - SERIE 7 Galvanized steel from 80 to 200 150 kg Material Beams IPE-NP Capacity 100 CABLE CARRYING TROLLEY - SERIE 7 Material Beams IPE-NP Galvanized steel from 80 to 200 Wheels Steel with bearing TRAILER - SERIE 7 Material Beams IPE-NP Galvanized steel from 80 to 200 Wheels Steel with bearing

HEAD WITH SADDLE - SERIE 7 320 Galvanized steel from 80 to 200 150 kg Material Beams IPE-NP Capacity CABLE CARRYING TROLLEY - SERIE 7 Galvanized steel from 80 to 200 Material Beams IPE-NP Wheels Steel with bearing TRAILER - SERIE 7 Galvanized steel from 80 to 200 Material Beams IPE-NP Wheels Steel with bearing

TROLLEYS FOR BEAMS CONNECTOR FOR FLAT CABLE - SOCKET TYPE CARPEL Galvanized steel from 80 to 140 Material Beams IPE-NP Wheels Steel with bearing Capacity Socket Weight CONNECTOR FOR FLAT CABLE - SOCKET TYPE STANDARD 310 Galvanized steel from 80 to 140 Material Beams IPE-NP Wheels Steel with bearing Capacity Socket Weight CONNECTOR FOR ROUND CABLE - SOCKET TYPE STANDARD Material Beams IPE-NP Galvanized Steel o inox from 80 to 140 Ø 40 Wheels Steel with bearing Capacity Socket Weight

ASSEMBLY INSTRUCTIONS LINE WITH TRAILER Insert the first head (without saddle) from the supply box opposite side, paying attention so as the PVC plug is pointing towards the line inside. Tighten the 4 screws of the “L” shaped stirrups to fix the head to the beam. Insert the trailer into the beam from the headless end. REMARK: as to series 7, the trailer is not symmetrical and it is therefore necessary to make sure the PVC plug is pointing towards the line inside. Insert ali the trolleys into the beam, one after the other.

Insert the second head and tighten the 4 screws of the “L” shaped stirrups to fix it to the beam free end, making sure the PVC plug is pointing towards the line inside. Run the feeding cable between the saddle and the countersaddle, starting from the head at the supply box side, passing through ali the trolleys and ending at the trailer. Make sure to leave enough cable length at the two line ends (before the head and after the trailer) to reach the supply box and the user. Leave enough cable length between each trolley to get the required loop. Tighten the relevant saddle screws to fix the...

NORMALISED MEASURES OF IPE - NP BEAMS When placing your order, specify the measure of the beam where the trolleys will slide. For standardized beams, please advise the type and the dimension. For non-standardized beams or for beams not being included in the tables here below, it is important to advise the flange width and thickness.

Via Como, 79 23883 • BRIVIO (Lc) • Italy Phone +39 039 5320952 • www.bycarpel.it • info@ bycarp