RACEWAY TYPE EUR
18Pages

CABLE CARRYING LINE EUROPEAN TYPE

Cable carrying line “EUROPEAN TYPE” The cable carrying line “EUROPEAN” type is a handy, efficient and safe system for electrical, pneumatic and other energy distribution for mobile equipment such as cranes, overhead cranes, etc. This catalogue includes various cable carrying lines; among them you will surely find the most suitable for your requirements. You may choose among several lines of cable carrying trolleys, all of them being standardized to assure a safe, efficient and lasting sliding operation inside our cable raceway. By Carpel will assure you quality and safety. All our lines...

CABLE CARRYING LINE “EUROPEAN TYPE” CABLE CARRYING RACEWAY Material Thickness Moment of inertia Resisting moment Weight Capacity Suspension distance ITEM NYLON SIMPLE HEAD ITEM Nylon body Small parts in galvanized ste STEEL SIMPLE HEAD STEEL Galvanized steel

SUSPENSION WITH SIDE FIXING Material Weight Capacity Galvanized steel without screws 80 g 30 kg CODE without screws ITEM with screws SUSPENSION WITH WALL FIXING Material Weight Capacity Galvanized steel without screws 100 g 45 kg CODE without screws ITEM with screws WALL SUSPENSION WITH COMPOUND FIXING SYSTEM Material Weight Capacity Square nuts Dadi quadri

CABLE CARRYING LINE “EUROPEAN TYPE” DOUBLE STEEL JOINT Galvanized steel SIMPLE STEEL JOINT Galvanized steel SIMPLE NYLON JOINT Nylon

HEAD WITH SADDLE Nylon body / Small parts in galvanized steel CABLE CARRYING TROLLEY Nylon body / Small parts in galvanized steel Nylon Wheels Capacity Nylon coated bearings Capacity SADDLE TRAILER Nylon body / Small parts in galvanized steel Nylon Wheels Capacity Nylon coated bearings Capacity

CABLE CARRYING LINE “EUROPEAN TYPE” HEAD WITH SADDLE 80 62 Material Capacity CABLE CARRYING TROLLEY 26 Galvanized steel Steel bearings Ø 25 mm 30 kg Material Wheels Capacity Galvanized steel Steel bearings Ø 25 mm 25 kg Material Wheels Capacity TWO-PIECE - CABLE CARRYING TROLLEY 70 Material Wheels Capacity Galvanized steel Steel bearings Ø 25 mm 20 kg

HEAD WITH SLEWING SADDLE 80 Material Capacity WEIGHT TROLLEY WITH SLEWING SADDLE 26 Material Wheels Capacity Galvanized steel Steel bearings Ø 25 mm 20 kg WEIGHT TRAILER WITH SLEWING SADDLE 80 Material Wheels Capacity Galvanized steel Steel bearings Ø 25 mm 15 kg ITEM

CABLE CARRYING LINE “EUROPEAN TYPE” HEAD WITH CLAMP 80 Material A (Ø cable max) Weight Capacity TROLLEY WITH CLAMP 26 Nylon body / Small parts in galvanized steel Nylon coated bearings Ø 25 mm 22 mm Wheels with bearing Nylon wheels TRAILER WITH CLAMP 26 Nylon body / Small parts in galvanized steel Nylon Ø 25 mm Nylon coated bearings Ø 25 mm 22 mm Wheels with bearing Nylon wheels

CONNECTOR FOR FLAT CABLE SOCKET TYPE CARPEL 420 Aluminium plate / Nylon socket / Galvanized steel slat Small parts in galvanized steel Wheels Capacity Weight CONNECTOR FOR FLAT CABLE SOCKET TYPE STANDARD Aluminium plate / Aluminium socket / Galvanized steel slat Small parts in galvanized steel Steel bearings Ø 25 mm 35 kg 2660 g Wheels Capacity Weight ITEM 10 Pole 16 Pole CONNECTOR FOR ROUND CABLE SOCKET TYPE STANDARD Aluminium plate / Aluminium socket / Galvanized steel slat Small parts in galvanized steel Steel bearings Ø 25 mm 35 kg 2885 g Wheels Capacity Weight

CABLE CARRYING LINE “EUROPEAN TYPE” SLAT TRAILER 250 250 Galvanized steel Steel bearings Ø 25 mm 30 kg Material Wheels Capacity SLAT TRAILER Galvanized steel Steel bearings Ø 25 mm 30 kg 270 g Material Wheels Capacity Weight CABLE CARRYING CLAW 13

ASSEMBLY ACCESSORIES BRACKET Galvanized steel Material LUNGH. STIRRUPS FOR LOCKING ON BEAM 30 Galvanized steel CURVED STIRRUPS Screw M8x50 With Flang. Vite/Screw M8x50 flange Material Capacity Weight Square Nut M8 Dado Quadro M8

CABLE CARRYING LINE “EUROPEAN TYPE” ASSEMBLY ACCESSORIES ROUGH JOINT Non galvanized steel 235 g Material Weight ITEM ROUGH JOINT C/RAIL Non galvanized steel 690 g Material Weight ITEM TUBE 40X40 Non galvanized steel 1650 g Material Weight ITEM

ASSEMBLY INSTRUCTIONS LINE WITH TRAILER Place the suspensions into their seats (walls or brackets). In this assembly phase the suspension screws must not be overtightened, in order to allow the raceway bars to be inserted and positioned, if necessary. Insert the raceway bars into the suspensions. Make sure that there is a proper number of suspensions all along the line. In this phase particular attention has to be paid to the “sharp edge” of the raceway cutting side: such an edge is required to properly align the raceway parts to be joined and for the trolley to properly slide inside. Apply...

CABLE CARRYING LINE “EUROPEAN TYPE” Check the alignment of the entire line. Insert the first head without the saddle, fixing it at the end opposite to that where the line will be connected to the feeding line. Insert the trailer into the raceway at the end without head. Then insert all the trolleys that will have to carry the feeding cable. Place the head with saddle and fix it in order to close the line. The line closing prevents the trailer and the trolleys to come out.

Insert the conductor cable into the trolley, between the saddle and the countersaddle starting from the head with saddle until reaching the trailer. Tighten the trolley screws fixing the cable between the saddle and the countersaddle, paying attention to verify that the cable does not slide at all into the trolley. Leave a quantity of cable between each trolley equal to the required loop. Sospensioni Suspension Traino Trailer Carrello portacavi Cable carrying trolley Giunto Joint Testata con sella Head with saddle Canalina Raceway Testata semplice Simple head Cavo Cable

CABLE CARRYING LINE “EUROPEAN TYPE” ASSEMBLY INSTRUCTIONS LINE WITH PUSH-BUTTON PANEL In case you have to mount the drive control line with push-button panel, the procedure is similar to the previous one, but having the foresight to insert the connector instead of the trailer. Start from point 6 of the instructions LINE WITH TRAILER. Proceed with the installation of the connector as follows: Prepare the flat cable to be mounted on the line, removing approx. 3 cm of external sheath and approx. 1 cm of sheath for each internal wire. Run the flat cable between the saddle and the connector...