RACEWAY TIPO 2000
18Pages

CABLE CARRYING LINE

Cable carrying line The cable carrying line "2000" type is a handy, efficient and safe system for electrical, pneumatic and other energy distribution for mobile equipment such as cranes, overhead cranes, etc. This catalogue includes various cable carrying lines; among them you will surely find the most suitable for your requirements. You may choose among several lines of cable carrying trolleys, all of them being standardized to assure a safe, efficient and lasting sliding operation inside our cable raceway. By Carpel will assure you quality and safety. All our lines have been labelled with...

CABLE CARRYING LINE TYPE 2000 CABLE CARRYING RACEWAY Material Resisting moment Suspension distance NYLON SIMPLE HEAD Material M6 Galvanized steel Nylon body Small parts STEEL SIMPLE HEAD Material 80 Galvanized Steel

SUSPENSION WITH SIDE FIXING Vite/Screws M12x40 t.e. 21.5 Galvanized Steel without screws with screws SUSPENSION WITH WALL FIXING Material Galvanized Steel with screws without screws WALL SUSPENSION WITH BUILT-UP FIXING SYSTEM 116 80 Galvanized Steel

CABLE CARRYING LINE TYPE 2000 DOUBLE STEEL JOINT Material Galvanized Steel SIMPLE STEEL JOINT Material Galvanized Steel

HEAD WITH SADDLE 40 Small parts CABLE CARRYING TROLLEY 87 Small parts Galvanized Steel Nylon Wheels Capacity ITEM Nylon coated bearing Small parts Galvanized Steel Nylon Wheels Steel coated bearing Capacity SADDLE

CABLE CARRYING LINE TYPE 2000 HEAD WITH SADDLE 80 Galvanized Steel CABLE CARRYING TROLLEY 100 Galvanized Steel Nylon Wheels Capacity Steel bearings Capacity Material Nylon Wheels Capacity Galvanized Steel Steel bearings Capacity

HEAD WITH SLEWING SADDLE Material Galvanized Steel Capacity SADDLE TROLLEY WITH SLEWING SADDLE 100 Galvanized Steel Steel bearings Capacity TRAILER WITH SLEWING SADDLE 44 Galvanized Steel

CABLE CARRYING LINE TYPE 2000 HEAD WITH CLAMP 80 62 Galvanized Steel Capacity ESTCODE TROLLEY WITH CLAMP 100 Galvanized Steel Nylon Ø 33 mm Ø 32 mm Steel bearings Nylon wheels 195 g Wheels with bearing TRAILER WITH CLAMP 44 Galvanized Steel Nylon Ø 33 mm Ø 32 mm Steel bearings Wheels with bearing

CONNECTOR FOR FLAT CABLE - socket type CARPEL 420 Alluminium plate / Nylon socket / Galvanized steel slat Small parts Wheels Galvanized steel Steel bearings Ø 32 mm CONNECTOR FOR FLAT CABLE - socket type STANDARD 420 Alluminium plate / Alluminium socket / Galvanized steel slat Material Small parts Wheels Galvanized steel Steel bearings Ø 32 mm CONNECTOR FOR ROUND CABLE - socket type STANDARD 420 Alluminium plate / Alluminium socket / Galvanized steel slat Material Small parts Wheels Galvanized steel Steel bearings Ø 32 mm

CABLE CARRYING LINE TYPE 2000 Galvanized Steel Nylon Wheels Capacity 165 Wheels Steel bearings Capacity TRAILER WITH CENTRAL SADDLE Material Galvanized Steel CABLE CARRYING CLAW avo ax c Ø m 6mm 1

ASSEMBLY ACCESSORIES BRACKET Galvanized Steel Material LENGTH STIRRUPS FOR LOCKING ON BEAM 30 Galvanized Steel CURVED STIRRUPS Vite/Screw M8x50 Flang. Material Capacity Weight

CABLE CARRYING LINE TYPE 2000 ASSEMBLY ACCESSORIES ROUGH JOINT Non galvanized steel 235 g Material Weight ITEM ROUGH JOINT C/RAIL Non galvanized steel 690 g Material Weight ITEM TUBE 40X40 Non galvanized steel 1650 g Material Weight ITEM

ASSEMBLY INSTRUCTIONS LINE WITH TRAILER Place the suspensions into their seats (walls or brackets). In this assembly phase the suspension screws must not be overtightened, in order to allow the raceway bars to be inserted and positioned, if necessary. Insert the raceway bars into the suspensions. Make sure that there is a proper number of suspensions all along the line. In this phase particular attention has to be paid to the “sharp edge” of the raceway cutting side: such an edge is required to properly align the raceway parts to be joined and for the trolley to properly slide inside. Apply...

CABLE CARRYING LINE TYPE 2000 Check the alignment of the entire line. Insert the first head without the saddle, fixing it at the end opposite to that where the line will be connected to the feeding line. Insert the trailer into the raceway at the end without head. Then insert all the trolleys that will have to carry the feeding cable. Place the head with saddle and fix it in order to close the line. The line closing prevents the trailer and the trolleys to come out.

Insert the conductor cable into the trolley, between the saddle and the countersaddle starting from the head with saddle until reaching the trailer. Tighten the trolley screws fixing the cable between the saddle and the countersaddle, paying attention to verify that the cable does not slide at all into the trolley. Leave a quantity of cable between each trolley equal to the required loop. Sospensioni Suspension Traino Trailer Carrello portacavi Cable carrying trolley Giunto Joint Testata con sella Head with saddle Canalina Raceway Testata semplice Simple head Cavo Cable

CABLE CARRYING LINE TYPE 2000 ASSEMBLY INSTRUCTIONS LINE WITH PUSH-BUTTON PANEL In case you have to mount the drive control line with push-button panel, the procedure is similar to the previous one, but having the foresight to insert the connector instead of the trailer. Start from point 6 of the instructions LINE WITH TRAILER. Proceed with the installation of the connector as follows: Prepare the flat cable to be mounted on the line, removing approx. 3 cm of external sheath and approx. 1 cm of sheath for each internal wire. Run the flat cable between the saddle and the connector plate....

Via Como, 79 23883 • BRIVIO (Lc) • Italy Phone +39 039 5320952 • www.bycarpel.it • info@ bycarp