- Catalogs
- Carpel-Min
- 66075 - Manual workstation with electric press
66075 - Manual workstation with electric press
66075 - Manual workstation with electric press
- High-Precision Pressing: Achieved through a robust internal mechanism and extensive data acquisition, allowing for adaptable pressing based on product requirements.
- Flexibility: The electric press accommodates product changes over its lifecycle.
- Real-Time Monitoring: Position and force can be plotted in real-time, enhancing control and precision.
- Manual and Electric Operation: Combines manual loading/unloading with electric press capabilities.
- Intuitive Interface: Features SCADA and MES communication for enhanced traceability and control.
- Dimensions: 2020 x 1100 x 770 mm
- Weight: 250 Kg
- Power Supply: Single-phase 230V AC + Ground at 50Hz, 1 KW
- Air Pressure Required: 6 Bar
- Noise Level: 45 dB
- Cycle Time: 12 seconds
- Annual Production: 1,350,000 units
- Power Consumption: Varies by model (CP-002, CP-005, CP-010, CP-020, CP-030)
- Maximum Force: Ranges from 2 kN to 30 kN
- Adjustment Unit: 0.005 N to 0.01 N
- Piston Stroke: 100/150/300 mm, customizable
- Position Repeatability: ±0.005 mm
Catalog excerpts
Manual workstation with electric press 66075 - Series Flexibility, precision, and control
Open the catalog to page 1
Semi-a utomatic pressing station, where the operator can unload, assemble, and load components simultaneously with pressing. The electric press allows position and force to be plotted in real time. The main challenge overcome was to achieve high-precision pressing, which was achieved by combining a mechanically robust and precise internal mechanism with massive data acquisition that allows the pressing to be varied according to the product's requirements. The flexibility provided by the electric press makes it easy to deal with any changes the product may undergo during its lifetime. Morphology...
Open the catalog to page 2
Carpel dypsis
Open the catalog to page 3
Carpel dypsis (*) Can be custom-made according to requirements
Open the catalog to page 4
Carpel-min Europe Barcelona (SPN) Zaragoza (SPN) JCX Asia Dongguan (CHN) Carpel-Dypsis America Hermosillo (MXC)
Open the catalog to page 5All Carpel-Min catalogs and technical brochures
73027 - EOL solenoid valve5 Pages
2025 - Introduction Carpel19 Pages
- Inspection system
- Test set
- Automatic inspection system
- Inspection machine
- Mounting machine
- Automatic assembling machine
- Quality inspection system
- Automatic control system
- Assembly line
- Industrial inspection machine
- Process control system
- Automatic test system
- Defect detection inspection system
- Automatic assembly line
- Visual inspection system
- Measurement inspection system
- In-line inspection system
- Defect inspection machine
- Management system
- 3D inspection system