HMB series hard metal end mills with coating

Product catalog summary

Overview: The document provides detailed specifications and pricing for the HMB series of hard metal end mills with coating, manufactured by Utensileria Carmon s.r.l. It includes information on two, three, and four flute end mills, along with their applications for different materials.

Specifications:

Two Flute End Mills: Available in diameters ranging from 3.00 mm to 20.00 mm, with prices varying from €15.93 to €181.23. These are suitable for general milling applications.
Three Flute End Mills: Diameters also range from 3.00 mm to 20.00 mm, with prices from €15.93 to €181.23. These are designed for more precise milling tasks.
Four Flute End Mills: Similar diameter range and pricing as the other types, optimized for high-speed milling and finishing operations.

Material Compatibility:

Common Steel: Suitable for soft, structural, and hardening steels with varying hardness levels.
Stainless Steel: Compatible with austenitic and ferritic-austenitic types.
Cast Iron: Effective for both soft and hard cast iron.
Titanium: Usable with unalloyed and alloyed titanium.
Copper and Alloys: Suitable for copper, brass, and bronze.
Nickel and Alloys: Compatible with unalloyed and alloyed nickel.
Aluminium: Effective for both unalloyed and alloyed aluminium.

Performance Parameters:

Feed rates and milling speeds are provided for different materials and end mill types, ensuring optimal performance and tool longevity.
RPM calculation formula: rpm = (mt/min x 1000) / (D x 3.14).

Contact Information: Utensileria Carmon s.r.l., Via Matteotti, 162 - 25014 Castenedolo (Bs) ITALY. Tel: +39 030 2130555, Fax: +39 030 2731634, Website: www.carmon.it, Email: [email protected].

Catalog excerpts

HMB series hard metal end mills with coating-1

SERIE HMB frese in metallo duro rivestite HMB SERIES hard metal end mills with coating

Open the catalog to page 1

HMB series hard metal end mills with coating-2

FRESE A DUE TAGLIENTI TWO FLUTE END MILLSl SCHAFTFRASER ZWEISCHNEIDERg FRAISES DEUX DENTS FRESAS DOS LABIOS CL 11 HMB ™l 30°

Open the catalog to page 2

HMB series hard metal end mills with coating-3

FRESE A TRE TAGLIENTI THREE FLUTE END MILLSl SCHAFTFRASER DREISCHNEIDERl FRAISES TROIS DENTS FRESAS TRES LABIOS

Open the catalog to page 3

HMB series hard metal end mills with coating-4

FRESE A QUATTRO TAGLIENTI FOUR FLUTE END MILLSl SCHAFTFRASER VIERSCHNEIDERlI FRAISES DEUX TAILLES A QUATRE DENTS FRESAS CUATRO LABIOS

Open the catalog to page 4

HMB series hard metal end mills with coating-5

IPO DI ACCIAIO TYPE OF STEEL Acciai teneri Soft steel 1 Acciai da costruzone Structural steel 2 Acciai da tempra Hardening steel 3 Acciaio automatico Automatic steel 4 Acciaio automatico Automatic steel 3 Austenitico Austenitic 3 Ferritico+austenitico Ferritic austenitic 4 Ghisa fino a 180 hb Cast iron up to 180hb 2 Ghisa oltre 180 hb Cast iron over 180hb 3 Titanio non legato Unalloyed titanium 5 Leghe di titanio Titanium alloys 5 Nichel non legato Unalloyed nichel 6 Leghe di nichel Nichel alloys 6 Alluminio non legato Unalloyed aluminium 7 Alluminio con leghe Alloyed aluminium...

Open the catalog to page 5

HMB series hard metal end mills with coating-6

UTENSILERIA CARMON s.r.l. Via Matteotti, 162 - 25014 Castenedolo (Bs) ITALY Tel. +39 030 2130555 - Fax +39 030 2731634 www.carmon.it - [email protected] COMPANY WITH QUALITY SYSTEM CERTIFIED BY DNV GL = ISO 9001 =

Open the catalog to page 6

All Carmon catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list