*mydirectindustry

EO1804NPAS

Product catalog summary

Product Overview
The EO1804.PAS is a family of general-purpose diffuse-reflective sensors designed for heavy-duty applications. These sensors are housed in a short M18 metal casing and are suitable for basic sensing tasks. They feature a 270° single-turn potentiometer for easy adjustment and offer a 4-wire complementary output in either NPN or PNP configurations.

Specifications

Range: Adjustable up to 400 mm, with a reference target of a Kodak test card R27, white, 90% reflectivity, 200 x 200 mm.
Supply Voltage: 10 to 40 VDC, with a maximum ripple of 10%.
Output: 200 mA NPN or PNP, with make and break switching functions and LED indication.
Protection: Reverse polarity, short-circuit, and transient protection.
Housing: Heavy-duty M18 metal housing, IP67 rated.
Light Source: GaAlAs LED, 880 nm, infrared, modulated synchronized.
Operating Frequency: 120 Hz, with a light/dark ratio of 1:2.
Response Time: OFF-ON ≤ 3.2 ms, ON-OFF ≤ 5 ms.
Environmental Ratings: Overvoltage category III, pollution degree 3, operating temperature -20° to +60°C, storage temperature -30° to +70°C.
Vibration and Shock Resistance: Vibration 10 to 150 Hz, 0.5 mm/7.5 g; Shock 2 x 1 m & 100 x 0.5 m.

Dimensions and Operation
The sensors are equipped with a make and break switching function, indicated by a yellow LED when the output is ON. The housing is made of nickel-plated brass with a black Luran® front and polyester cable end. The connection options include a grey, oilproof PVC cable or an M12 x 1 plug.

Accessories and Approvals

Accessories include MB18A, connector type CON.14NF.. series, a screwdriver for adjustments, and APA18-RAR.
Approvals include UL, CSA, and CE-marking.

Catalog excerpts

CARLO GAVAZZI Range: 400 mm adjustable Modulated, infrared light Supply voltage: 10 to 40 VDC Output: 200 mA NPN or PNP Make and break switching function, LED indication Protection: Reverse polarity, short-circuit, transients High immunity to ambient light Heavy duty M18 metal housing, IP67 Cable and plug versions Product Description Ordering Key Type Housing diameter Range Output type Housing material Connection type The EO1804 is a family of general purpose Diffuse-reflective sensors in a short M18 metal housing for heavy duty applications. They are useful for simple applications where a basic sensor provides adequate sensing performance. The sensors are easy to adjust with 270° single turn potentiometer. The output is a 4-wire complementary (NO and NC) output in NpN (current sinking) or PNP (current souring). Housing Rated diameter operating Ordering no. NPN/cable Make & break swit. Ordering no. NPN/plug Make & break swit. Ordering no. PNP/cable Make & break swit. Ordering no. PNP/plug Make & break swit. EO 1804 NPAS EO 1804 NPAS-1 EO 1804 PPAS EO 1804 PPAS-1 Specifications Rated operating dist. (Sn) Adjustable Specifications are subject to change without notice (04:08.2022)

Open the catalog to page 1

Wiring Diagrams CARLO GAVAZZI Housing material Body Front Cable end Nuts Operation Diagram_ Power supply Object present, light received Output ON: Make switching (NO) BK (4) Break switching (NC) WH (2)hTv—— Delivery Contents • Photoelectric switch EO1804.PAS(-1) • 2 nuts • Packaging: plastic bag • MB18A • Connector type CON.14NF.. series • Screw driver for adjustments: 77-000 • APA1 8-RAR Specifications are subject to change without notice (04:08.2022)

Open the catalog to page 2

All Carlo Gavazzi Automation SpA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list