ROCKER SWITCHES
176Pages

{{requestButtons}}

Catalog excerpts

ROCKER SWITCHES - 1

Carling Technologies* Innovative Designs. Powerful Solutions.

Open the catalog to page 1
ROCKER SWITCHES - 2

Since its founding, Carling Technologies has continually forged a tradition of leadership in quality and product innovation. There are few products that Carling Technologies hasn’t turned “ON” and fewer industries that haven’t turned to Carling for solutions. With ISO and TS registered manufacturing facilities and technical sales offices worldwide, Carling ranks among the world’s largest manufacturers of circuit breakers, switches, power distribution units, digital switching systems and electronic controls. SWITCHES & CONTROLS • Rocker • Toggle • Pushbutton • Rotary CIRCUIT PROTECTION •...

Open the catalog to page 2
ROCKER SWITCHES - 3

Table of Contents Page RG-Series Super Curvett®, Non-Illuminated, 1P/2P... 33 Carling Technologies is the leading manufacturer of switches and controls serving OEMs worldwide. Carling Technologies broad product range offers a full line of rocker, toggle, pushbutton, rotary and mini switches for a wide variety of applications. Featuring cutting edge designs and advanced features, Carling products are well known for their performance and reliability Available Online are tools such as a part configurator, product selectors and stock checks. Please visit www.carlingtech.com for the latest...

Open the catalog to page 3
ROCKER SWITCHES - 4

'Options and approvals shown may apply to specific construction combinations only, consult factory for clarification. Manufacturer reserves the right to change product specifications without prior notice.

Open the catalog to page 4
ROCKER SWITCHES - 5

'Options and approvals shown may apply to specific construction combinations only, consult factory for clarification.

Open the catalog to page 5
ROCKER SWITCHES - 6

'Options and approvals shown may apply to specific construction combinations only, consult factory for clarification.

Open the catalog to page 6
ROCKER SWITCHES - 7

Tippette Switches (TIG,TIH,TII & LTIL,LTIG) - Introduction The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These switches are appropriate for use in general purpose applications which may or may not require a modicum of environmental protection. The Tippette Series is available in both illuminated and non-illuminated versions and features a wide variety of circuits, actuator styles and bracket options. This versatile offering includes international agency certifications and ratings to 26 amps for select circuits. Physical...

Open the catalog to page 7
ROCKER SWITCHES - 8

Base Part Number Actuator Style Actuator Color Bracket Single Pole in Double Pole base 2 Double Pole Three Pole On-None-Off (On)-None-Off On-None-(Off) On-None-On On-None-(On) On-Off-On On-Off-(On) (On)-Off-(On) On-None-Off (On)-None-Off On-None-(Off) On-None-On On-None-(On) On-Off-On On-Off-(On) (On)-Off-(On) Double Pole Additional ratings up to 20A 125-277VAC, 1 1/2HP 125 VAC, 2HP 250VAC are available. Consult factory for specifics. 3 ACTUATOR COLOR 9 BL Black WH White RD Red ■ 4 BRACKET STYLE 9 A Screw Mount 5 WBL Water shedding Black 4 MBL Marine Style Black 4,6 FN BLK...

Open the catalog to page 8
ROCKER SWITCHES - 9

Tippette Rocker & Bracket Styles - Dimensional Specifications CROSS-LINE W/ONE LENS LONG-LINE W/ONE LENS SMOOTH W/ONE LENS WITH SOLDER LUG TERMINAL AND NBL BRACKET FLATTED STYLE NO LENS TOGGLE-STYLE W/ONE LENS CURVED W/ONE LENS WITH SOLDER LUG TERMINALS AND NBL BRACKET

Open the catalog to page 9
ROCKER SWITCHES - 10

Tippette Actuator Styles & Special Circuits - Dimensional Specifications TERMINAL TYPE .075[1.905] IEC APPROVED CONSTRUCTION (TIG ONLY) WIRE LEAD MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness: .030 min. - .250 max. Switch should be mounted at 90˚ for maximum water shedding (45˚ to 90˚ acceptable) PRINTED CIRCUIT * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. SCREW (ASSEMBLED) SPECIAL CIRCUITS FOR TIPPETTE ROCKER SWITCHES Circuit Position 1 Position 2 Progressive Two Circuit GG BOTH CIRCUITS ON ONE CIRCUIT ON GG BOTH CIRCUITS (ON) ONE...

Open the catalog to page 10
ROCKER SWITCHES - 11

Tippette Mounting Bracket Styles - Dimensional Specifications TAPPED HOLE CLEARANCE HOLE (Nylon Snap-in Brackets) Panel Thickness: .030 min. - .250 max. * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. MOUNTING HOLE Standard with C Bracket Standard with A & B Brackets GLOSS FINISH MBL, NBL, WBL TIG BLACK NYLON, SNAP-IN

Open the catalog to page 11
ROCKER SWITCHES - 12

LS-Series Rocker Switches - Introduction LS-Series LS-Series ROCKER SWITCHES The LS-Series Softspot illuminated rocker switches feature a three-color high brightness light sequence, from a single lamp. These switches are designed with a standard nylon snap-in bracket and “Drip-Dry” construction that protects the front panel from dust and moisture. Product Highlights: Typical Applications: Water Resistant Construction Independent or Dependent Illumination Up to 3 Different Colors Under a Single Lens Multiple Termination Options Marine Transportation

Open the catalog to page 12
ROCKER SWITCHES - 13

Dielectric Strength 1000V - live to dead metal parts Electrical Life 50,000 cycles - maintained 25,000 cycles - momentary Mechanical Life 100,000 cycles Operating Temperature 0°F to 150°F (-17.8°C to +65.6°C) Base Part Number Lighting Actuator Base Color Lamp Voltage Sequence Color 1 BASE PART NUMBER: SERIES / POLES / ILLUMINATION / CIRCUITRY / RATING / TERMINATION 3 10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 15-28VDC Single Pole On-None-Off On-None-(Off) (On)-None-Off On-None-On On-None-(On) On-Off-On On--Off-(On) (On)-Off-(On) Screw Terms Wire Leads 2 LIGHTING...

Open the catalog to page 13
ROCKER SWITCHES - 14

S-Series Rocker Switches - Introduction S-Series rocker switches are designed for use in the enclosed cabs of today’s trucks, with special focus afforded to the vehicle operator. With features including abbreviated travel V2 throw actuation, ergonomic rockers, illumination in up to three detent switch positions, and a non-teasable snap action circuit, these switches provide the driver with easily recognizable and simple to operate controls. Designers will appreciate the 10A, 24VDC rating, space saving compact envelope, clean bezel-less design, integrated low insertion force connector and...

Open the catalog to page 14
ROCKER SWITCHES - 15

S-Series Rocker Switches - General Specifications Environmental Contact Rating Dielectric Strength Insulation Resistance Contact Resistance Contact Bounce Life Circuitry Terminals Mechanical Endurance 250,000 cycles minimum Operating Temperature Vibration Cold Test Dry Heat Test Criteria Handling Shock Thermal Shock 10A@ 24VDC 1500 Volts RMS between pole to pole 50 Megaohms 10 milliohms max. @ 4VDC <20 milliseconds 100,000 cycles maintained circuit,50,000 cycles momentary circuit at rated voltage and current gold plated SP, DP 2 & 3 position, 1/2 or full throw .110 Tabs, Silver Plated...

Open the catalog to page 15

All Carling Technologies catalogs and technical brochures

  1. 641-Series

    6 Pages

  2. Marine Catalog

    190 Pages

  3. H-Series

    14 Pages

  4. Carling GFCI

    29 Pages

  5. VP-Series

    6 Pages

  6. W-Series

    10 Pages

  7. R135-Series

    2 Pages

  8. ST-Series

    8 Pages

  9. C-Series

    4 Pages

  10. D-Series

    4 Pages

  11. DK-EK-Series

    4 Pages

  12. F-Series

    4 Pages

  13. G-Series

    4 Pages

  14. H-I-Series

    4 Pages

  15. LT-Series

    4 Pages

  16. BD-Series

    10 Pages

  17. TB-Series

    6 Pages

  18. PB-Series

    12 Pages

  19. PC-Series

    14 Pages

  20. V-Charger

    6 Pages