D-SeriesCIRCUIT BREAKER Designed for snap-on-back panel rail mounting on either a 35mm x 7.5mm, or a 35mm x 15mm Symmetrical Din Rail, allowing rapid and simple mounting and removal of the breaker. It features recessed, wire-ready, touch-proof, shock-resistant terminals, suitable for automatic screwdriver assembly, as well as “Dead Front” construction characteristics. Available with a Visi-Rocker two-color actuator, which can be specified to indicate either the ON or the TRIPPED/OFF mode, or solid color rocker or handle type actuators. All actuator types fit in the same industry standard panel cutouts. Product Highlights: ♦ 0.02 - 50 Amps ♦ 480 VAC or 65 VDC ♦ 1-4 poles (Handle) ♦ 1-3 poles (Rocker) ♦ Choice of Time Delays Typical Applications: ♦ Industrial Controls ♦ Renewable Energy ♦ DIN rail mounting ♦ Precise temperature independent operation ♦ Wiping contacts - mechanical linkage with two-step ♦ Finger safe terminals ♦ Common trip linkage between poles ensures that an overload in one pole will trip all adjacent poles Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.923

2 | D-Series Circuit Breaker - General Specifications Electrical Mechanical Maximum Voltage Standard Current Coils Standard Voltage Coils Insulation Resistance Dielectric Strength Resistance, Impedance AC, 480 wye/277 VAC (See Table A), 50/60 Hz, 65VDC 0.100, 0.250, 0.500, 0.750, 1.00, 2.50, 5.00, 7.50, 10.0, 15.0, 20.0, 25.0, 30.0, 35.0, 40.0 & 50.0. Other ratings available -consult factory. DC - 6V, 12V; AC - 120V, other ratings available, see ordering scheme. Minimum of 100 Megohms at 500 VDC. UL, CSA: 1960 V 50/60 Hz for one minute between all electrically isolated terminals. D-Series circuit breakers...

Electrical Tables Table A: Lists UL Recognized, CSA Accepted and VDE Certified configurations and performance capabilities as a Component Supplementary Protector. D-SERIES TABLE A: COMPONENT SUPPLEMENTARY PROTECTORS Notes: 1 DC and 1 Phase 277 V ratings are 1 or 2 poles breaking. Three phase ratings are 3 poles breaking. 2 Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 150 A for 250V rating and 125 A for 277 and 480 V ratings. 3 UL recognition and CSA Acceptance at 480 volts refers to 3 and 4 pole...

4 CIRCUIT A0 Switch Only (No Coil) 4 B0 Series Trip (Current) C0 Series Trip (Voltage) Series Actuator Poles Terminal Actuator Color 7 CURRENT RATING (AMPERES) 9 CODE AMPERES 2 ACTUATOR 1 Handle 2 A Handle, one per pole B Handle, one per multipole unit Visi-Rocker 3 C Indicate ON, vertical legend D Indicate ON, horizontal legend E Indicate ON, no legend (VDE approval not available with no legend) F Indicate OFF, vertical legend G Indicate OFF, horizontal legend H Indicate OFF, no legend (VDE approval not available with no legend) Single Color Rocker 3 J Vertical legend...

D-Series Circuit Breaker - Circuit & Terminal Diagram | 5 HANDLE ACTUATOR ROCKER ACTUATOR INDICATE "ON" SERIES TRIP (2 TERM'S.) SWITCH ONLY (2 TERM'S.) LINE MULTI-POLE IDENTIFICATION SCHEME POLE POLE POLE <2/ ROCKER ACTUATOR INDICATE "OFF' & SINGLE COLOR SERIES TRIP (2 TERM'S.) LOAD SWrTCH ONLY (2 TERM'S.) LOAD MULTI-POLE IDENTIFICATION SCHEME POLE POLE POLE 12 3 (HANDLE ACTUATOR SHOWN) TABLE A TIGHTENING TORQUE SPECIFICATIONS TERMINALS ARE SUPPLIED WITH #10-32 SCREW AND PRESSURE PLATE PER TERMINAL Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise...

6 | D-Series Circuit Breaker - Rocker - Dimensional Specifications INDICATE "OFF" & SINGLE COLOR rilMnmATF "OFF" SHOWN) 1-POLE (DPI) Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 3 Dimensions apply to all variations shown. Notice that circuit breaker line and load terminal orientation on indicate OFF is opposite of indicate ON. 4 For pole orientation with horizontal legend, rotate front view clockwise 90°.

D-Series Circuit Breaker - Handle - Dimensional Specifications | 7 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.010 [.25] unless otherwise specified. Email: [email protected] Application Support: [email protected] Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com

Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.co

Sales Representatives, Distributors & Company Profile | 9 Authorized Sales Representatives and Distributors Click on a region of the map below to find your local representatives and distributors or visit www.carlingtech.com/findarep. MIDDLE EAST MEXICO AFRICA ASIA-PACIFIC OCEANIA SOUTH AMERICA About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical...

Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Suite 1607, 16/F Tower 2, The Gateway, Harbour City, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong Phone: Int + 852-2737-2277...