BD-SERIES BD-Series BATTERY DISCONNECT POWER SWITCH Carling Technologies BD-Series battery disconnect switch is designed to minimize battery drain, ensure maintenance personnel safety, and when used in conjunction with a padlock, provide vehicle theft protection. Resources: Download 3D CAD Files Watch Product Video Product Highlights: 100-250 Amps 12VDC/24VDC IP67 Sealing Protection Lock Compatible Typical Applications: On/Off-Highway Equipment Military Marine 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231

2 | BD-Series Battery Power Switch - Design Features DESIGN FEATURES SHAFT SEALS SLIDING CONTACT BODY SEAL ROTARY KNOB LOCK COMPATIBLE Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.co

BD-Series Battery Power Switch - General Specifications | 3 Electrical Application Voltage Mechanical DC Free drop Rated voltage: 12VDC /24VDC Range of operating voltage: 12VDC: min 9VDC, max 16VDC; Endurance 24VDC: min 18VDC, max 32VDC No damage after 3 drops from 1000 mm height More than 100,000 cycles without load Current Ratings Environmental Operating Temp. -40 °C to +85 °C. Intermittent Current Dielectric Strength Insulation Resistance Temperature rise 1500A: 3 seconds on, 60 seconds off @24VDC,1500A, repeated 10 times, voltage drop should not be more than 400mV between main terminals. 50HZ,...

4 | BD-Series Battery Power Switch - Ordering Scheme & Dimensional Specifications Rating Termination "0N/0FF" SINGLE POLE SINGLE THROW SWITCH CIRCUIT DIAGRAM Email: [email protected] Application Support: [email protected] Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com

BD-Series Battery Power Switch - Mounting Method 1 | 5 MOUNTING STEP 1: PUT THE MOUNTING GASKET WITH THE SW ITCH ORIENTATION AS SHOWN MOUNTING STEP 2: ORIENT AS SHOWN AND INSTALL THE SWITCH IN MOUNTING PANEL HOLE; THEN INSERT STUDS AND WASHERS AS SHOWN, MOUNTING PANEL MOUNTING STEP 3: TIGHTEN 2PCS M8 NUTS (USE TORQUE [10-15Nm]) Notes: 1 Switch can be mounted horizontally or vertically.

6 | BD-Series Battery Power Switch - Mounting Method 2 MOUNTING STEP 1; INSTALLING SWITCH WITH MOUNTING BRACKET ORIENTATION AS SHOWN MOUNTING STEP 2: ORIENTAT AS SHOWN AND INSTALL THE SWITCH ASSY IN CUSTOMER PANEL. Notes: 1 Switch can be mounted horizontally or vertically.

BD-Series Battery Power Switch - Wiring | 7 WIRING 2: ATTACH 2PCS M10 "0" RING TERMINALS AS SHOWN, THEN RE-FASTEN WASHERS AND NUTS; WHEN USED IN CONJUNCTION WITH A PAD CDCK, SWITCH CAN BE LOCKED IN THE "OFF" POSITION TO PROVIDE SECURITY AND SAFETY WIRING 3: TIGHTEN 2PCS BRASS M10 NUTS (USE TORQUE [6-8Nm])

Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.co

Sales Representatives, Distributors & Company Profile | 9 Authorized Sales Representatives and Distributors Click on a region of the map below to find your local representatives and distributors or visit www.carlingtech.com/findarep. MIDDLE EAST MEXICO AFRICA ASIA-PACIFIC OCEANIA SOUTH AMERICA About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical...

Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Suite 1607, 16/F Tower 2, The Gateway, Harbour City, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong Phone: Int + 852-2737-2277...