*mydirectindustry

Compa II + APL

Product catalog summary

Overview: The document introduces the Compa II + APL system, a modular labeling solution designed for versatility and ease of use. It highlights the system's ability to apply labels through stamping, blowing, and rolling methods, directly after printing.

Label Application Methods:

Tamp Pad: The product remains fixed during the print and apply cycle. The universal tamp is customizable to label sizes and covered by a foil.
Blow Pad: Suitable for sensitive products, labels are blown onto the product using an air jet stream. The blow pad operates at a preadjusted position approximately 10 mm from the product.
Roll-on Pad: The label is forwarded to touch the roller, which then applies and rolls the label onto the product.

Technical Specifications:

Label Dimensions: Width: 25-176 mm, Height: 25-200 mm (varies by method).
Cylinder Stroke: 300 mm for all methods.
Compressed Air Pressure: 5 bar.
Product Surface: Flat, with variable or fixed height options.

Printing Specifications:

Print Resolution: Ranges from 203 dpi to 600 dpi depending on the model.
Print Speed: Maximum of 200 mm/s for most models.
Print Width: Maximum ranges from 104 mm to 162.6 mm.
Label Materials: Supports adhesive, continuous labels, and various materials like paper, cardboard, textile, and synthetics.

Additional Features:

Interfaces: Includes Serial RS-232c, Parallel Centronics, USB 2.0, Ethernet, and optional WLAN.
Operating Conditions: Nominal voltage of 110-230 V, operating temperature between 5-35°C, and relative humidity up to 80% non-condensing.

Contact Information: The document provides contact details for sales offices in Stuttgart, Munich, and Spain, as well as the main office of Carl Valentin GmbH in Villingen-Schwenningen.

Catalog excerpts

cOMPa ii + aPl The perfect addition to our tried and tested all-rounder. Quality . Tradition . Innovation

Open the catalog to page 1

Compa II + APL – Modular composition for high versatility of use. With Compa II, we set a milestone in the matters of versatility and ease of use. We have now expanded this system to include the APL applicator unit for stamping, blowing and rolling labels on. For our customers, that means: the desired label is applied to your product directly after printing. Labelling really is that simple. Technical daTa label width label height cylinder stroke Pad stroke below printer Product surface Product height variable Product height fixed Product fixed Product linear movement Tamp pad During the print...

Open the catalog to page 2

Technical data Print resolution Flat Type Flat Type Flat Type Flat Type Flat Type Flat Type Labels Adhesive labels, continuous labels rolls or fan-fold: paper, cardboard, textile, synthetics Material weight Label width Label height Standard Cutter mode/dispenser mode Label height max (higher on demand) Roll diameter Internal unwinder Internal rewinder Core diameter Label sensor below transmission and reflexion Core diameter Roll diameter Fonts Font types 6 bitmap fonts I 6 vector fonts/TrueType fonts I 6 proportional fonts I more fonts on demand CODABAR, Code 128, Code 2/5 interleaved,...

Open the catalog to page 3

Local retailer Carl Valentin GmbH Neckarstraße 78 – 86 u. 94 D - 78056 Villingen-Schwenningen Phone + 49 7720 9712 - 0 . Fax + 49 7720 9712 - 9901 [email protected] . www.carl-valentin.de Sales oce Stuttgart Zeppelinstraße 4 . D - 71157 Hildrizhausen Phone + 49 7034 654223 . Fax + 49 7034 654225 . [email protected] Sales oce Munich Marienplatz 8a . D - 83043 Bad Aibling Phone + 49 8061 3498888 . Fax + 49 8061 3499127 . [email protected] Sales oce Spain C/Cabo Santiago Gómez, 3 Esc. Dcha. 22 B . E - 15004 La Coruña Móvil +34 609 022 241 . [email protected] . www.carl-valentin.es...

Open the catalog to page 4

Compa II + APL

Compa II + APL

Catalog excerpts

All Carl Valentin GmbH catalogs and technical brochures